Rheological behaviour of Al2O3 and CuO suspensions was characterised in order to fabricate Al2O3/Cu foams as an alternative way to produce foams with better mechanical properties than common Al2O3 foams. Different quantities of raw materials were combined to select the formulations for the ceramic-metal foams. Foams were produced by a double impregnation process, followed by a thermal cycle and a reduction cycle. In this work, materials were characterised trough zeta potential, SEM and optical dilatometry. Foams microstructure and compressive strength were evaluated. Final structures had a compressive resistance of 0.44 ± 0.14 MPa.
ColomboP.Conventional and novel processing methods for cellular ceramics. Philos Trans R Soc A.2006;364(1838):109–124. doi: 10.1098/rsta.2005.1683
5.
GómezSY, AlvarezOA, EscobarJA, Rodrigues NetoJB, RamboCR, HotzaD.Relationship between rheological behavior and final structure of Al2O3 and YSZ foams produced by replica. Adv Mater Sci Eng.2012;2012:549508-1–9.
6.
TripkovicD, RadojevicV, AleksicR.Factors affecting the microstructure of porous ceramics. J Serb Chem Soc.2006;71(3):277–284. doi: 10.2298/JSC0603277T
7.
BrownDD, GreenDJ. Investigation of strut crack formation in open cell alumina ceramics. J Am Ceram Soc.1994;77(6):1467–1472. doi: 10.1111/j.1151-2916.1994.tb09744.x
8.
MortensenA, LlorcaJ.Metal matrix composites. Annu Rev.2010;40:243–270.
9.
Miranda-HernandezJG, De La TorreS, Rocha-RangelE.Synthesis, microstructural analysis and mechanical properties of alumina-matrix cermets. Epitoanyag – J Silicate Compos Mater.2010;62(1):2–5. doi: 10.14382/epitoanyag-jsbcm.2010.1
10.
Miranda-HernándezJ, Moreno-GuerreroS, Soto-GuzmánA, Rocha-RangelE.Production and characterization of Al2O3-Cu composite materials. J Ceram Process Res.2006;7(4):311–314.
11.
AfsharA, SimchiA.Abnormal grain growth in alumina dispersion-strengthened copper produced by an internal oxidation process. Scr Mater.2008;58:966–969. doi: 10.1016/j.scriptamat.2008.01.029
12.
JachK, PietrzakK, WajlerA, SidorowiczA, BrykalaU.Application of ceramic preforms to the manufacturing of ceramic - metal composites. Arch Metall Mater.2013;58(4):1425–1428.
13.
JachK, PietrzakK, WajlerA, Strojny-NedzaA.Fabrication of an alumina–copper composite using a ceramic preform. Powder Metall Met Ceram.2014;52:680–685. doi: 10.1007/s11106-014-9577-3
14.
MoloodiA, RaiszadehR, Vahdati-KhakiJ, BabakhaniA.An assessment of the process of self-propagating high-temperature synthesis for the fabrication of porous copper composite. J Alloys Compd.2009;487:413–419. doi: 10.1016/j.jallcom.2009.07.152
15.
PulidoV.Protocolo para la caracterización mecánica de espumas cerámicas. Bogotá. Colombia: Universidad de los Andes; 2001.
16.
MorenoR.Reología de suspensiones cerámicas. Madrid, España: Consejo Superior de Investigaciones Científicas; 2005.
