In this work the effect of spent diatomaceous earth (SDE), as pore forming or silica carrier, on the properties of clay ceramic bricks was investigated. Mixtures of clay and SDE waste were, compacted, dried and fired at 950°C during 6 h. The technological properties of waste-clay bricks were analysed to evaluate the influence of the waste incorporation. The SDE (1–5 wt-%) addition in the clay matrix causes a reduction between 6 and 12% of the bulk density compared with the control samples (only clay) which implies good insulating characteristics. In addition, the waste incorporation increases the water absorption within the range 4–31% and decreases the compressive strength between 12 and 26%. However, the incorporation of the waste is beneficial as no remarkable changes in the technological properties are observed. These results indicate that the waste has a predominant pore forming effect over a pore filling effect.
‘Informe socioeconómico del sector de la cerveza en España’. 2014, Madrid, Ministerio de Agricultura, Alimentación y Medio Ambiente. Secretaría General Técnica. Centro de Publicaciones.
2.
GoldammerT.The Brewer's handbook: the complete book to brewing beer. 2nd ed. Clifton, VA: Apex Publisher; 2008.
3.
HoughJS.The biotechnology of malting and brewing. Cambridge: Cambridge University Press; 1991.
4.
Guía de Mejores Técnicas Disponibles en España del sector cervecero. Madrid: Centro de Publicaciones Ministerio de Medio Ambiente; 2005.
5.
CoutoDMS, SilvaRF, CastroF, . Attempts of incorporation of metal plating sludges in ceramic products. Ind Ceram.2001;21:163–168.
6.
LiewAG, IdrisA, WongCHK, . Incorporation of sewage sludge in clay brick and its characterization. Waste Manage Res.2004;22:226–233. doi: 10.1177/0734242X04044989
7.
AlginHM, TurgutP.Cotton and limestone powder wastes as brick material. Constr Build Mater.2008;122:1074–1080. doi: 10.1016/j.conbuildmat.2007.03.006
8.
SutcuM, AkkurtS.The use of recycled paper processing residues in making porous brick with reduced thermal conductivity. Ceram Int.2009;35:2625–2631. doi: 10.1016/j.ceramint.2009.02.027
9.
La Rubia-GarcíaMD, Yebra-RodríguezA, Eliche-QuesadaD, . Assessment of olive mill solid residue (pomace) as an additive in lightweight brick production. Const Build Mater.2012;6:495–500. doi: 10.1016/j.conbuildmat.2012.06.009
10.
Schmidt-ReinholzCH.Suggestions for the reduction of bulk density through additives. Tile Brick Int.1990;6(3):23–27.
11.
DondiM, MasigliM, FabbriB.Recycling of industrial and Urban wastes in brick production – A review. Tile Brick Int.1997;13:218–225.
12.
ParkinsonJ, GordonR.Beyond micromachining: the potential of diatoms. Trends Biotechnol.1999;17:190–196. doi: 10.1016/S0167-7799(99)01321-9
13.
PimraksaK, ChindaprasirtP.Lightweight bricks made of diatomaceous earth, lime and gypsum. Ceram Int.2009;35:471–478. doi: 10.1016/j.ceramint.2008.01.013
14.
VuD-H, WangK-S, BacBH, . Humidity control materials prepared from diatomite and volcanic ash. Constr Build Mater.2013;38:1066–1072. doi: 10.1016/j.conbuildmat.2012.09.040
15.
ASTM D2974-14. Standard test methods for moisture, ash, and organic matter of peat and other organic soils. West Conshohocken (PA): ASTM International; 2014. Available from: www.astm.org.
16.
ASTM C326-09(2014). Standard test method for drying and firing shrinkages of ceramic whiteware clays. West Conshohocken (PA): ASTM International; 2014. Available from: www.astm.org.
17.
ASTM C373-14a. Standard test method for water absorption, bulk density, apparent porosity, and apparent specific gravity of fired whiteware products, ceramic tiles, and glass tiles. West Conshohocken (PA): ASTM International; 2014. Available from: www.astm.org.
18.
UNE-EN 772-11:2001. Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units. Madrid: Spanish Association for Standardisation and Certification; 2001.
19.
UNE-EN 772-1:2011+A1:2016. Methods of test for masonry units - Part 1: Determination of compressive strength. Madrid: Spanish Association for Standardisation and Certification; 2016.
20.
MonteiroSN, VieiraCMF.Characterization of clays from campos dos Goytacazes, 329 North Rio de Janeiro state (Brazil). Tile Brick Int.2002;18:152–157.
21.
SegadãesAM.Use of phase diagrams to guide ceramic production. Adv Appl Ceram.2006;105:46–54. doi: 10.1179/174329006X82927
22.
GravalosI, KaterisD, XyradakisP, . ‘A study on calorific energy values of biomass residue pellets for heating purposes’, Proceeding of FORMEC, 2010, 1–9.
23.
BarbieriL, AndreolaF, LancellottiI, . Management of agricultural biomass wastes: preliminary study of characterization and valorization in clay matrix bricks. Waste Manage.2013;33:2307–2315. doi: 10.1016/j.wasman.2013.03.014
24.
UNE EN 15359:2011. Solid recovered fuels - Specifications and classes. Madrid: Spanish Association for Standardisation and Certification; 2012.
25.
HaJ-H, Abbas BukhariSZ, LeeJ, . Preparation and characterization of alumine based composite supports layers. Adv Appl Ceram.2016;115:229–235. doi: 10.1080/17436753.2015.1126953
26.
HaJ-H, BaeB, SongI-H.Effect of pore characteristics on permeability of sintered diatomite filter for microfiltration. Adv Appl Ceram.2015;114:156–163. doi: 10.1179/1743676114Y.0000000211
27.
SenffL, HotzaD, LabrinchaJA.Effect of diatomite addition on fresh and hardened properties of mortars investigated through mixture experiments. Adv Appl Ceram.2011;110:142–150. doi: 10.1179/1743676110Y.0000000009
28.
ASTM C62-10. Standard specification for building brick (Solid masonry units made from clay or shale). West Conshohocken (PA): ASTM International; 2010.
