Silicate ions were incorporated into a pre-treatment to mitigate corrosion in reinforcing steel bars. The efficiency of these pre-treatments was compared by testing steel samples in concrete pore simulating solutions contaminated with chloride ions. The study involved cyclic voltammetry, anodic polarisation curves and weight-loss tests following a 60-day immersion period. Surface analysis included micro-Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). The electrical properties of the film were analyzed by impedance spectroscopy and Mott–Schottky plots. Polarisation curves show higher pitting potentials and lower corrosion current densities when pre-treating with silicate ions. Localised attack appears after 60 days of immersion in solutions containing chloride ions, but weight loss is reduced by 75% for coupons pre-treated in silicate solutions. XPS and Raman spectra indicate that the presence of silicate ions affects the composition of the passive film and the corrosion products. The results show that pre-treatments in silicate solutions are effective to minimise steel corrosion in aggressive environments.
KumarV.Protection of steel reinforcement for concrete – a review. Corros Rev. 1998; 16: 317–358.
2.
MorrisWVázquezM.Corrosion of reinforced concrete exposed to marine environment. Corros Rev. 2002; 20: 469–508.
3.
TangSWYaoYAndradeC. Recent durability studies on concrete structure. Cem Concr Res. 2015; 78: 143–154.
4.
AlonsoCCastelloteMAndradeC.Chloride threshold dependence of pitting potential of reinforcements. Electrochim Acta. 2002; 47: 3469–3481.
5.
BlairRPesicBKlineJ. Threshold chloride concentrations and passivity breakdown of rebar steel in real concrete solution at different pH conditions with the addition of glycerol. Acta Metall Sinica (Engl Lett). 2017; 30: 376–389.
6.
CaoYGehlenCAngstU. Critical chloride content in reinforced concrete — an updated review considering Chinese experience. Cem Concr Res. 2019; 117: 58–68.
7.
GlassGKBuenfeldNR.The presentation of the chloride threshold level for corrosion of steel in concrete. Corros Sci. 1997; 39: 1001–1013.
8.
MammolitiLHanssonCMHopeBB.Corrosion inhibitors in concrete. Part II: effect on chloride threshold values for corrosion of steel in synthetic pore solutions. Cem Concr Res. 1999; 29: 1583–1589.
9.
GoyalAPouyaHSGanjianE. A review of corrosion and protection of steel in concrete. Arab J Sci Eng. 2018; 43: 5035–5055.
10.
AfsharAJahandariSRasekhH. Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives. Constr Build Mater. 2020; 262: 120034.
11.
BalonisMSantGBurkan IsgorO.Mitigating steel corrosion in reinforced concrete using functional coatings, corrosion inhibitors, and atomistic simulations. Cem Concr Compos. 2019; 101: 15–23.
12.
MorrisWVázquezMSánchezSRd.Efficiency of coatings applied on rebars in concrete. J Mater Sci. 2000; 35: 1885–1890.
13.
GlassGKRobertsACDavisonN.Assessment of cathodic protection applied to above ground reinforced concrete. Mater Corros. 2019; 70: 503–510.
14.
BerkeNSHicksMC.Predicting long-term durability of steel reinforced concrete with calcium nitrite corrosion inhibitor. Cem Concr Compos. 2004; 26: 191–198.
15.
HanssonCMMammolitiLHopeBB.Corrosion inhibitors in concrete – part I: the principles. Cem Concr Res. 1998; 28: 1775–1781.
16.
RajaPBGhoreishiamiriSIsmailM.Natural corrosion inhibitors for steel reinforcement in concrete – a review. Surf Rev Lett. 2015; 22 (03) 1550040.
17.
FrontiniMAGomez SanchezAGuidoniGM. Characterization of surface films on constructional steel in carbonated media containing chloride and nitrite ions. Electrochim Acta. 2020; 364: 137296.
18.
LiXLiuJWangJ. Microstructure of passive film on steel in synthetic concrete pore solution in presence chloride and nitrite. Int J Electrochem Sci. 2019; 14: 8624–8638.
19.
NgalaVTPageCLPageMM.Corrosion inhibitor systems for remedial treatment of reinforced concrete. Part I: calcium nitrite. Corros Sci. 2002; 44: 2073–2087.
20.
ValcarceMBVázquezM.Carbon steel passivity examined in alkaline solutions: the effect of chloride and nitrite ions. Electrochim Acta. 2008; 53: 5007–5015.
21.
ValcarceMBVázquezM.Carbon steel passivity examined in solutions with a low degree of carbonation: the effect of chloride and nitrite ions. Mater Chem Phys. 2009; 115: 313–321.
22.
DuffekEFMcKinneyDS. New method of studying corrosion inhibition of iron with sodium silicate, 103 (1956) 645-648.
23.
ArmstrongRDZhouS.The corrosion inhibition of iron by silicate related materials. Corros Sci. 1988; 28: 1177–1181.
24.
Jiann-RueyCHuei-YunCYuh-LinL. Studies on carbon steel corrosion in molybdate and silicate solutions as corrosion inhibitors. Surf Sci. 1991; 247: 352–359.
25.
GirčienėORamanauskasRGudavičiūtėL. Inhibition effect of sodium nitrite and silicate on carbon steel corrosion in chloride-contaminated alkaline solutions. Corrosion. 2011; 67: 125001-1–125001-12.
26.
MohorichMELambJChandraD. Electrochemical studies on silicate and bicarbonate ions for corrosion inhibitors. Metall Mat Trans A Phys Metall Mat Sci. 2010; 41: 2563–2574.
27.
MontesFFrontiniAVázquezM. Silicate ions as corrosion inhibitors for carbon steel in chloride-contaminated concrete pore simulating solutions. Corrosion. 2020; 76: 1147–1154.
28.
FranzoniEPiginoBPistolesiC.Ethyl silicate for surface protection of concrete: performance in comparison with other inorganic surface treatments. Cem Concr Compos. 2013; 44: 69–76.
29.
FrontiniMASchreinerWVázquezM. Nitrite corrosion inhibition in chloride-rich electrolytes correlated to the electrical properties of surface films on carbon steel. Constr Build Mater. 2019; 227: 116650.
30.
YohaiLSchreinerWValcarceMB. Inhibiting steel corrosion in simulated concrete with low phosphate to chloride ratios. J Electrochem Soc. 2016; 163: C729–C737.
31.
ValcarceMBLópezCVázquezM.The role of chloride, nitrite and carbonate ions on carbon steel passivity studied in simulating concrete pore solutions. J Electrochem Soc. 2012; 159: C244–C251.
32.
YohaiLVázquezMValcarceMB.Phosphate ions as corrosion inhibitors for reinforcement steel in chloride-rich environments. Electrochim Acta. 2013; 102: 88–96.
33.
PalitAPehkonenSO.Copper corrosion in distribution systems: evaluation of a homogeneous Cu2O film and a natural corrosion scale as corrosion inhibitors. Corros Sci. 2000; 42: 1801–1822.
34.
A.S.o.T.a. Materials. Standard test method for corrosivity of water in the absence of heat transfer (weight loss method). West Conshohocken (PA): American Society of Testing and Materials; 2015.
35.
DewaldJF.The charge distribution at the zinc oxide-electrolyte interface. J Phys Chem Solids. 1960; 14: 155–161.
36.
ChengYFLuoJL.A comparison of the pitting susceptibility and semiconducting properties of the passive films on carbon steel in chromate and bicarbonate solutions. Appl Surf Sci. 2000; 167: 113–121.
37.
AhnSJKwonHS.Effects of solution temperature on electronic properties of passive film formed on Fe in pH 8.5 borate buffer solution. Electrochim Acta. 2004; 49: 3347–3353.
38.
WilliamsonJIsgorOB.The effect of simulated concrete pore solution composition and chlorides on the electronic properties of passive films on carbon steel rebar. Corros Sci. 2016; 106: 82–95.
39.
WilliamsonJAsadVJIsgorOB.Modeling electronic properties of the passive films on carbon steel in simulated concrete pore solutions. J Electrochem Soc. 2015; 162: C619–C629.
40.
ValcarceMBLópezCVázquezM.The role of chloride, nitrite and carbonate ions on carbon steel passivity studied in simulating concrete pore solutions. J Electrochem Soc. 2012; 159: C244–C251.
41.
XuWDaubKZhangX. Oxide formation and conversion on carbon steel in mildly basic solutions. Electrochim Acta. 2009; 54: 5727–5738.
42.
de FariaDLAVenâncio SilvaSde OliveiraMT.Raman microspectroscopy of some iron oxides and oxyhydroxides. J Raman Spectrosc. 1997; 28: 873–878.
43.
SinghJKSinghDDN.The nature of rusts and corrosion characteristics of low alloy and plain carbon steels in three kinds of concrete pore solution with salinity and different pH. Corros Sci. 2012; 56: 129–142.
44.
HazanESadiaYGelbsteinY.Characterization of AISI 4340 corrosion products using Raman spectroscopy. Corros Sci. 2013; 74: 414–418.
45.
Alaoui MouaydAKoltsovASutterE. Effect of silicon content in steel and oxidation temperature on scale growth and morphology. Mater Chem Phys. 2014; 143: 996–1004.
46.
RuschBHannaKHumbertB.Coating of quartz silica with iron oxides: characterization and surface reactivity of iron coating phases. Colloids Surf, A. 2010; 353: 172–180.
47.
WangLDaubKQinZ. Effect of dissolved ferrous iron on oxide film formation on carbon steel. Electrochim Acta. 2012; 76: 208–217.
