The corrosion resistance features of two different Metal Matrix Composites based on 6061 and 2618 aluminium alloys reinforced by 20% Al2O3 particles by stir casting process, were studied in 3.5% NaCl and compared. The composites and their respective base alloys were characterised in terms of microstructure by optical and scanning electron microscopy and in terms of corrosion resistance by polarisation curves and electrochemical impedance. Results show how the presence of Al2O3 has different effects depending on matrix composition. In 6061 MMC, Al2O3 promotes the formation of Mg2Si which has a cathodic behaviour altering the pitting susceptibility of the composite. In 2618 MMC, the high content of Cu induces a strong uniform attack. The subsequent increase in the Open Circuit Potential caused a pitting attack.
SajjadiSAEzatpourHRTorabi PariziM.Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes. Mat Des. 2012; 34: 106–111. doi: 10.1016/j.matdes.2011.07.037
2.
IbrahimIAMohamedFALaverniaEJ.Particulate reinforced metal matrix composites - a review. J Mat Sci. 1991; 26: 1137–1156. doi: 10.1007/BF00544448
3.
FoltzJVBlackmonCM.Metal-Matrix Composites. Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, Vol.2, ASM Handbook, ASM International, 1992.
4.
HashimJLooneyLHashmiMSJ.Metal matrix composites: production by the stir casting method. J Mat Proc Tech. 1999; 92-93: 1–7. doi: 10.1016/S0924-0136(99)00118-1
5.
VenclARacABobićI.Tribological behaviour of Al-based MMCs and their application in automotive industry. Trib Ind. 2004; 3-4: 31–38.
6.
KarabulutŞGökmenUÇiniciH.Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O3/B4C/SiC particles. Compos B. 2016; 93: 43–55. doi: 10.1016/j.compositesb.2016.02.054
7.
EsmailyMMortazaviNSvenssonJEA new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites. Compos B. 2016; 94: 176–189. doi: 10.1016/j.compositesb.2016.02.019
8.
ShawLLKarpurPMatikasTE.Fracture strength and damage progression of the fiber/matrix interfaces in titanium-based MMCs with different interfacial layers. Compos B. 1998; 29: 331–339. doi: 10.1016/S1359-8368(96)00077-7
9.
JafarianHHabibi-LivarJHossein RazaviS.Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding. Compos B. 2015; 77: 84–92. doi: 10.1016/j.compositesb.2015.03.009
10.
KarabulutŞKarakoçHÇıtakR.Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites. Compos B. 2016; 101: 87–98. doi: 10.1016/j.compositesb.2016.07.006
11.
PardoAMerinoMCLópezMDInfluence of reinforcement grade and matrix composition on corrosion resistance of cast aluminium matrix composites (A3xx.x/SiCp) in a humid environment. Mater Corros. 2003; 54: 311–317. doi: 10.1002/maco.200390070
12.
RawalS.Metal-Matrix composites for Space applications. JOM. 2001; 53 (4): 14–17. doi: 10.1007/s11837-001-0139-z
13.
KainerKU.Metal matrix composites. Custom-made materials for Automotive and aerospace Engineering. Weinheim: Wiley-VCH Verlag GmbH & Co; 2006.
14.
BonolloFGuerrieroRSentimentiEThe effect of quenching on the mechanical properties of powder metallurgically produced Al-SiC (particles) metal matrix composites. Mater Sci Eng, A. 1991; 144: 303–309. doi: 10.1016/0921-5093(91)90237-H
15.
Włodarczyk-FligierADobrzańskiLAKremzerMManufacturing of aluminium matrix composite materials reinforced by Al2O3 particles. J Achiev Mater Manuf Eng. 2008; 27 (1): 99–102.
16.
FangC-KHuangCCChuangTH.Synergistic effects of wear and corrosion for Al2O3 particulate-reinforced 6061 aluminum matrix composites. Metall Mater Trans A. 1999; 30: 643–651. doi: 10.1007/s11661-999-0056-2
17.
ZakiAAbdul AleemBJ.Degradation of aluminum metal matrix composites in salt water and its control. Mater Des. 2002; 23: 173–180. doi: 10.1016/S0261-3069(01)00066-8
18.
ChenCMansfeldM.Corrosion protection of an Al 6092/SiCp metal matrix composite. Corros Sci. 1997; 39: 1075–1082. doi: 10.1016/S0010-938X(97)00008-5
ShimizuYNishimuraTMatsushimaI.Corrosion resistance of Al-based metal matrix composites. Mater Sci Eng A. 1995; 198: 113–118. doi: 10.1016/0921-5093(95)80065-3
SunHKooEYWheatHG.Corrosion behavior of SiCp/6061 Al metal matrix composites. Corros. 1991; 47: 741–753. doi: 10.5006/1.3585184
23.
PardoAMerinoMCMerinoSInfluence of reinforcement proportion and matrix composition on pitting corrosion behaviour of cast aluminium matrix composites (A3xx.x/SiCp). Corros Sci. 2005; 47: 1750–1764. doi: 10.1016/j.corsci.2004.08.010
24.
TrzaskomaPP.Pit morphology of aluminum alloy and silicon carbide/aluminum alloy metal matrix composites. Corros. 1990; 46: 402–409. doi: 10.5006/1.3585124
25.
HiharaLH.Corrosion of metal matrix composites. reference Module in materials science and materials Engineering. Shreir's Corrosion. 2010; 3: 2250–2269. doi: 10.1016/B978-044452787-5.00110-4
26.
CandanS.An investigation on corrosion behaviour of pressure infiltrated Al–Mg alloy/SiCp composites. Corros Sci. 2009; 51: 1392–1398. doi: 10.1016/j.corsci.2009.03.025
27.
PintoGMNayakJShettyAN.Corrosion Behaviour of 6061 Al - 15vol. Pct. SiC composite and its base Alloy in a Mixture of 1:1 Hydrochloric and Sulphuric acid Medium. Int J Electrochem Sci. 2009; 4: 1452–1468.
28.
Veeresh KumarGMRaoCSPSelvarajNStudies on Al6061-SiC and Al7075-Al2O3 metal matrix composites. J Mineral Mater Charact Eng. 2010; 1: 43–55. doi: 10.4236/jmmce.2010.91004
29.
De SalazarJMGUreñaAManzanedoSCorrosion behaviour of AA6061 and AA7005 reinforced with Al2O3 particles in aerated 3.5% chloride solutions: potentiodynamic measurements and microstructure evaluation. Corros Sci. 1999; 41: 529–545. doi: 10.1016/S0010-938X(98)00135-8
30.
ASTM G1. Standard practice for preparing, cleaning, and evaluating corrosion test specimens. West Conshohocken, PA: ASTM International; 1990.
31.
NunesPCRRamanathanLV.Corrosion behavior of discu-aluminum and silicon carbide-aluminum metal-matrix composites. Corros. 1995; 51: 610–617. doi: 10.5006/1.3293621
WinklerSLRyanMPFlowerHM.Pitting corrosion in cast 7XXX aluminium alloys and fibre reinforced MMCs. Corros Sci. 2004; 46: 893–902. doi: 10.1016/j.corsci.2003.09.003
34.
SugimotoKSawadaYMoriokaS.Effects of alloying elements on the pitting corrosion of aluminum. Trans Jap Inst Met. 1972; 13: 345–351. doi: 10.2320/matertrans1960.13.345
35.
AzizIZhangQ.Xiang M using EIS to Evaluate Anti-corrosion properties of the SiCp/5A06 Aluminium MMC Treated by Cerium Conversion Coatings. J Rare Earths. 2010; 28: 109–116. doi: 10.1016/S1002-0721(09)60062-4
36.
MourotMCourleuxADehmasMTransformation kinetics and resulting microstructure in MMC reinforced with TiC particles. Solid State Phenom. 2011; 747: 172–174.
