The paper presents a new method of assessment of metal surface coverage with corrosion inhibitor and thus of inhibitor protective performance. It is based on the atomic force microscopy measurement performed in a contact mode. Apart from topography images the proposed approach allows acquisition of local DC maps and local electrical impedance spectra via application of DC bias voltage or AC perturbation signal between the conductive AFM tip and the substrate. Potentialities of this technique in inhibitor performance monitoring were illustrated on the example of copper/benzotriazole system exposed to elevated humidity environment.
AntonijevicMMPetrovicMB.Copper corrosion inhibitors: a review. Int J Electrochem Sci. 2008; 3: 1–28.
2.
FinsgarMMilosevI.Inhibition of copper corrosion by 1,2,3-benzotriazole: a review. Corros Sci. 2010; 52: 2737–2749. doi: 10.1016/j.corsci.2010.05.002
3.
QafsaouiWBlancChPebereNStudy of different triazole derivative inhibitors to protect copper against pitting corrosion. J Appl Electrochem. 2000; 30: 959–966. doi: 10.1023/A:1004056527379
4.
KosecTMerlDKMilosevI.Impedance and XPS study of benzotriazole films formed on copper, copper-zinc alloys and zinc in chloride solution. Corros Sci. 2008; 50: 1987–1997. doi: 10.1016/j.corsci.2008.04.016
5.
BabicRMetikos-HukovicMLoncarM.Impedance and photoelectrochemical study of surface layers on Cu and Cu-10Ni in acetate solution containing benzotriazole. Electrochim Acta. 1999; 44: 2413–2421. doi: 10.1016/S0013-4686(98)00367-3
6.
RavichandranRNanjundanSRajendranN.Effect of benzotriazole derivatives on the corrosion of brass in NaCl solutions. Appl Surf Sci. 2004; 236: 241–250. doi: 10.1016/j.apsusc.2004.04.025
7.
KosecTMilosevIPihlarB.Benzotriazole as an inhibitor of brass corrosion in chloride solution. Appl Surf Sci. 2007; 253: 8863–8873. doi: 10.1016/j.apsusc.2007.04.083
8.
DermajAHajjajiNJoiretSElectrochemical and spectroscopic evidences of corrosion inhibition of bronze by a triazole derivative. Electrochim Acta. 2007; 52: 4654–4662. doi: 10.1016/j.electacta.2007.01.068
9.
GerengiHDarowickiKBereketGEvaluation of corrosion inhibition of brass-118 in artificial seawater by benzotriazole using Dynamic EIS. Corros Sci. 2009; 51: 2573–2579. doi: 10.1016/j.corsci.2009.06.040
10.
DivyasreeP.Effect of benzotriazole corrosion inhibitor in strength and durability properties of concrete. IJSRD. 2014; 2 (1): 2321–0613.
11.
PavlovicMGPavlovicLjJDoroslovackiIDThe effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder. Hydrometallurgy. 2004; 73: 155–162. doi: 10.1016/j.hydromet.2003.08.005
12.
HsiehM-KDzombakDAVidicRD.Effect of tolyltriazole on the corrosion protection of copper against ammonia and disinfectants in cooling systems. Ind Eng Chem Res. 2010; 49: 7313–7322. doi: 10.1021/ie100384d
13.
RochdiAKassouODkhirecheNInhibitive properties of 2,5-bis(n-methylphenyl)-1,3,4-oxadiazole and biocide on corrosion, biocorrosion and scaling controls of brass in simulated cooling water. Corros Sci. 2014; 80: 442–452. doi: 10.1016/j.corsci.2013.11.067
14.
FaltermeierRB.A corrosion inhibitor test for copper-based artifacts. Stud Conserv. 1998; 44: 121–128.
15.
MadsenHB.A preliminary note on the use of benzotriazole for stabilising bronze objects. Stud Conserv. 1967; 12: 163–166. doi: 10.2307/1505414
16.
MadsenHB.Further remarks on the use of benzotriazole for stabilising bronze objects. Stud Conserv. 1971; 16: 120–122. doi: 10.2307/1505489
17.
SzocińskiM.Evaluation of organic coatings condition with AFM-based method. Surf Innov. 2016; 4 (2): 70–75. doi: 10.1680/jsuin.15.00007
DarowickiKSzocińskiMZielińskiA.Assessment of organic coating degradation via local impedance imaging. Electrochim Acta. 2010; 55: 3741–3748. doi: 10.1016/j.electacta.2010.01.081
20.
SzocińskiMDarowickiKSchaeferK.Identification and localization of organic coating degradation onset by impedance imaging. Polym Degrad Stabil. 2010; 95: 960–964. doi: 10.1016/j.polymdegradstab.2010.03.016
21.
DarowickiKSzocińskiMSchaeferKInvestigation of morphological and electrical properties of the PMMA coating upon exposure to UV irradiation based on AFM studies. Prog Org Coat. 2011; 71: 65–71. doi: 10.1016/j.porgcoat.2010.12.012
22.
SzocińskiMDarowickiKSchaeferK.Application of impedance imaging to evaluation of organic coating degradation at a local scale. J Coat Technol Res. 2013; 10: 65–72. doi: 10.1007/s11998-012-9458-y
23.
SzocińskiMDarowickiK.Local properties of organic coatings close to glass transition temperature. Prog Org Coat. 2014; 77: 2007–2011. doi: 10.1016/j.porgcoat.2014.04.015
24.
ShaoRKalininSVBonnellDA.Local impedance imaging and spectroscopy of polycrystalline ZnO using contact atomic force microscopy. Appl Phys Lett. 2003; 82: 1869–1871. doi: 10.1063/1.1561168
25.
O'HayreRLeeMPrinzFB.Ionic and electronic impedance imaging using atomic force microscopy. J Appl Phys. 2004; 95: 8382–8392. doi: 10.1063/1.1737047
26.
O'HayreRFengGNixWDQuantitative impedance measurement using atomic force microscopy. J Appl Phys. 2004; 96: 3540–3549. doi: 10.1063/1.1778217
27.
WexlerAHasegawaS.Relative humidity-temperature relationships of some saturated salt solutions in the temperature range 0° to 50°C. J Res Nat Stand. 1954; 53 (1): 19–26. doi: 10.6028/jres.053.003
