In order to investigate the influence of wet H2S environment on impact toughness of G105 drill pipe steel, the impact test of drill pipe exposed to NACE A solution for different time was carried out. Meanwhile, the diffusible hydrogen concentration was measured to study the relationship between diffusible hydrogen and impact toughness damage. The results suggest that with the increase of corrosion time, the impact energy of G105 drill pipes decreases from 107.7 to 88.4 J, and the dynamic fracture toughness decreases gradually. The impact toughness damage increases as the diffusion hydrogen concentration increases. However, the impact energy recovery happened after hydrogen releasing. The quasi-cleavage features occur with the increasing of hydrogen concentration.
LiuWLuSLZhangY. Corrosion performance of 3% Cr steel in CO2-H2S environment compared with carbon steel. Mater Corros. 2015; 66: 1232–1244. doi: 10.1002/maco.201408174
2.
ParkGTKohSUJungHG. Effect of microstructure on the hydrogen trapping efficiency and hydrogen induced cracking of line pipe steel. Corros Sci. 2008; 50: 1865–1871. doi: 10.1016/j.corsci.2008.03.007
3.
LiuMWangJQKeW. Corrosion behavior of X52 anti-H2S pipeline steel in high H2S concentration solutions at temperatures ranging from 25°Cto140°C.J Mater Sci Technol. 2013; 48: 380–387.
4.
ZhaoWZouYMatsudaK. Corrosion behavior of reheated CGHAZ of X80 pipeline steel in H2S-containing environments. Mater Des. 2016; 99: 44–56. doi: 10.1016/j.matdes.2016.03.036
5.
EslamiAKaniaRWorthinghamB. Effect of CO2 and R-ratio on near-neutral PH stress corrosion cracking initiation under a disbonded coating of pipeline steel. Corros Sci. 2011; 53: 2318–2327. doi: 10.1016/j.corsci.2011.03.017
6.
ChoiYSHassaniSVuTN. Abas AZB, effect of H2S on the corrosion behaviour of pipeline steels in supercritical and liquid CO2 environments. Corros. 2016; 71: 999–1009.
7.
WeiLPangXLGaoKW.Corrosion of low alloy steel and stainless steel in supercritical CO2/H2O/H2S systems. Corros Sci. 2016; 111: 637–648. doi: 10.1016/j.corsci.2016.06.003
8.
ChenLQZhouJChenYX. The dependence of electrochemical behaviors on the corrosion products of L360NCS steel exposed to wet H2S environments. Int J Electrochem Sci. 2016; 11: 3987–3999. doi: 10.20964/110355
9.
ZhengSQQiYMChenCF. Effect of hydrogen and inclusions on the tensile properties and fracture behaviour of A350LF2 steels after exposure to wet H2S environments. Corros Sci. 2012; 60: 59–68. doi: 10.1016/j.corsci.2012.04.012
10.
QiYMLuoHYZhengSQ. Effect of immersion time on the hydrogen content and tensile properties of A350LF2 steel exposed to hydrogen sulphide environments. Corros Sci. 2013; 69: 164–174. doi: 10.1016/j.corsci.2012.11.038
11.
KimWKKohSUYangBY. Effect of environmental and metallurgical factors on hydrogen induced cracking of HSLA steels. Corros Sci. 2008; 50: 3336–3342. doi: 10.1016/j.corsci.2008.09.030
12.
AtkinsonHVShiG.Characterization of inclusions in clean steels: a review including the statistics of extremes methods. Prog Mater Sci. 2003; 48: 457–520. doi: 10.1016/S0079-6425(02)00014-2
13.
XueHBChengYF.Characterization of inclusions of X80 pipeline steel and its correlation with hydrogen-induced cracking. Corros Sci. 2011; 53: 1201–1208. doi: 10.1016/j.corsci.2010.12.011
14.
JinTYLiuZYChengYF.Effect of non-metallic inclusions on hydrogen-induced cracking of API5L X100 steel. Int J Hydrogen Energy. 2010; 35: 8014–8021. doi: 10.1016/j.ijhydene.2010.05.089
15.
GonzalezJIRamirezRHallenJM. Hydrogen-induced crack growth rate in steel plates exposed to sour environments. Corrosion. 1997; 53: 935–943. doi: 10.5006/1.3290278
16.
WildeBEKimCDPhelpsEH.Some observations on the role of inclusions in the hydrogen induced blister cracking of linepipe steels in sulfide environments. Corros NACE. 1980; 36: 625–632. doi: 10.5006/0010-9312-36.11.625
17.
KawashimaAHashimotoKShimodairaS.Hydrogen electrode reaction and hydrogen embrittlement of mild steel in hydrogen sulfide solutions. Corrosion. 1976; 32: 321–331. doi: 10.5006/0010-9312-32.8.321
18.
TsayLWChiMYChenHT. Investigation of hydrogen sulfide stress corrosion cracking of PH 13-8 Mo stainless steel. Mater Sci Eng A. 2006; 416: 155–160. doi: 10.1016/j.msea.2005.10.021
19.
HuangBSChenXHuangLP.Changes of microstructure and properties of G105 drill pipe in H2S environment. Mater Sci. 2015; 814: 303–312.
20.
LiDMLongWZouN.Corrosion behavior of P110SS Anti-sulfer pipeline steel in low H2S and high CO2 partial pressure environment of UItradeep well. Surface Technol. 2016; 45: 102–108. doi: 10.1016/j.colsurfa.2016.05.018
21.
SunJSunCLinX. Effect of chromium on corrosion behavior of P110 steels in CO2-H2S environment with high pressure and high temperature. Materials. 2016; 9: 200–213. doi: 10.3390/ma9030200
22.
SchindlerHJ.Estimation of the dynamic J-R-curve from a single impact bending test mechanisms and mechanics of damage and failure. Vol. 33. New York: W. W. Norton; 1991. p. 245–278.
23.
SofronisPLiangYAravasN.Changes of microstructure and properties of G105 drill pipe in H2S environment. Eur J Mech – A/Solids. 2001; 20: 857–872. doi: 10.1016/S0997-7538(01)01179-2
24.
ChuWY.Hydrogen damage and delayed cracking. Beijing: Metallurgical Industry Publishers; 1988.
