To develop continuous fibre compos laminates and fabrics in the aeronautics and aerospace industry, a thorough understanding of the behaviour of these materials under various loading conditions is required. The purpose of this work aims to assess the failure of different composite materials subjected to a bending load, using the progressive damage approach. Puck's failure criteria and gradual degradation model have been used to simulate the initial and the successive damage, respectively. A user-defined material (UMAT) subroutine has been developed and implemented through finite element software Abaqus. Moreover, the effect of geometrical parameters is performed and identified by the experimental protocol. The predicted results obtained by this numerical modelling show a good correlation with the findings of the experimental test.
KimJS, LeeSY, RohJH.Failure analysis of laminated composites subjected to flexural loadings. Adv Compos Mater. 2020;29(3):301–316. doi:10.1080/09243046.2020.1724467
2.
Al-JelawyHM, MackieKR.Flexural behavior of concrete beams strengthened with polyurethane-matrix carbon-fiber composites. J Compos Constr. 2020;24(4):04020027, doi:10.1061/(asce)cc.1943-5614.0001033
3.
SunQ, . A combined experimental and computational analysis of failure mechanisms in open-hole cross-ply laminates under flexural loading. Compos Part B Eng. 2021;215(July 2020):108803, doi:10.1016/j.compositesb.2021.108803
4.
HanKN, ZhouW, QinR, . Progressive damage analysis of carbon fabric-reinforced polymer composites under three-point bending. Fibers Polym. 2021;22(2):469–479. doi:10.1007/s12221-021-0357-7
5.
BenbourasY, BellahkimM, MaziriA, . An analytical and experimental study of the nonlinear behaviour of a carbon/epoxy under a three-point bending test. Plast. Rubber Compos. 2021;51:145–153. doi:10.1080/14658011.2021.1950457
6.
El IdrissiH, SeddoukiA.Modelling of progressive damage in a notched carbon/epoxy composite laminate subjected to tensile loading using different assessment methods coupled with FEM. Fibers Polym. 2022;23(11):3146–3162. doi:10.1007/s12221-022-0019-4
7.
El IdrissiH, SeddoukiA.A comprehensive study of the flexural behaviour and damage evolution of composite laminates using a progressive failure model. Int J Adv Manuf Technol. 2023;127(7-8):3869–3890. doi:10.1007/s00170-023-11746-x
8.
El IdrissiH, SeddoukiA.Analysis of the progressive damage of A notched AS4/PEEK composite laminate subjected to tensile loading. Stat. Optim. Inf. Comput. 2023;11:125–135. doi:10.19139/soic-2310-5070-1555
9.
ChenJF, MorozovEV, ShankarK.A combined elastoplastic damage model for progressive failure analysis of composite materials and structures. Compos. Struct. 2012;94(12):3478–3489. doi:10.1016/j.compstruct.2012.04.021
10.
SuZC, TayTE, RidhaM, . Progressive damage modeling of open-hole composite laminates under compression. Compos. Struct. 2015;122:507–517. doi:10.1016/j.compstruct.2014.12.022
11.
RidhaM, WangCH, ChenBY, . Composites : part A modelling complex progressive failure in notched composite laminates with varying sizes and stacking sequences. Compos Part A. 2014;58:16–23. doi:10.1016/j.compositesa.2013.11.012
12.
SunCT, GhentG.Elastic-plastic finite element analysis of thermoplastic composite plates and shells. AIAA J. 1992;30(2):513–518.
13.
MokhtariA, Ould OualiM, Tala-IghilN.Damage modelling in thermoplastic composites reinforced with natural fibres under compressive loading. Int. J. Damage Mech. 2015;24(8):1239–1260. doi:10.1177/1056789515573900
14.
LiuH, . Modelling damage in fibre-reinforced thermoplastic composite laminates subjected to three-point bend loading. Compos Struct. 2020;236:111889, doi:10.1016/j.compstruct.2020.111889
15.
IrhiraneEH, AbousalehM, EchaabiJ, . Modeling and simulation of the failure and stiffness degradation of a graphite epoxy in a three point bending test. J Eng Mater Technol Trans ASME. 2010;132(3):0310131–0310138. doi:10.1115/1.3078392
16.
BenbourasY, BellahkimM, MaziriA, . Nonlinear modeling of the failure of a graphite epoxy under a three-point bending test. Polym Polym Compos. 2020;28(2):119–139. doi:10.1177/0967391119866597
PuckA, SchürmannH.Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol. 2002;62(12-13 SPECIAL ISSUE):1633–1662. doi:10.1016/S0266-3538(01)00208-1
19.
GadadeAM, LalA, SinghBN.Finite element implementation of Puck's failure criterion for failure analysis of laminated plate subjected to biaxial loadings. Aerosp Sci Technol. 2016;55:227–241. doi:10.1016/j.ast.2016.05.001
20.
LeeCS, YooBM, KimMH, . Viscoplastic damage model for austenitic stainless steel and its application to the crack propagation problem at cryogenic temperatures. Int J Damage Mech. 2013;22(1):95–115. doi:10.1177/1056789511434816
21.
ChenJF, MorozovEV, ShankarK.Simulating progressive failure of composite laminates including in-ply and delamination damage effects. Compos Part A Appl Sci Manuf. 2014;61:185–200. doi:10.1016/j.compositesa.2014.02.013
22.
LeeCS, KimJH, KimSK, . Initial and progressive failure analyses for composite laminates using Puck failure criterion and damage-coupled finite element method. Compos. Struct. 2015;121:406–419. doi:10.1016/j.compstruct.2014.11.011
23.
ASTM Standard D790. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. Annual Book of ASTM Standards. 1997;08:1–11.
24.
ABC composites Standard Prepreg Range & Technical data sheets NT-FTP-022 (T700). Index 3. 2016.
25.
EchaabiJ, TrochuF, PhamXT, . Theoretical and experimental investigation of failure and damage progression of graphite-epoxy composites in flexural bending test. J Reinf Plast Compos. 1996;15(7):740–755. doi:10.1177/073168449601500707
26.
WiegandJ, PetrinicN, ElliottB.An algorithm for determination of the fracture angle for the three-dimensional puck matrix failure criterion for UD composites. Compos. Sci. Technol. 2008;68(12):2511–2517. doi:10.1016/j.compscitech.2008.05.004
27.
Dal MasoF, MeziereJ.Calcul des propriétés élastiques des tissus utilisés dans les matériaux composites. Rev l'Institut Français du Pétrole. 1998;53(6):857–870. doi:10.2516/ogst:1998073
28.
BakhshanH, AfrouzianA, AhmadiH, . Progressive failure analysis of fiber-reinforced laminated composites containing a hole. Int J Damage Mech. 2018;27(7):963–978. doi:10.1177/1056789517715088
29.
CamineroMA, RodríguezGP, MuñozV.Effect of stacking sequence on Charpy impact and flexural damage behavior of composite laminates. Compos Struct. 2016;136:345–357. doi:10.1016/j.compstruct.2015.10.019
30.
NuismerRJ, TanSC.Constitutive relations of a cracked composite lamina. J Compos Mater. 22(4):306–321. doi:10.1177/002199838802200401
31.
PuckA, KoppJ, KnopsM.Guidelines for the determination of the parameters in Puck's action plane strength criterion. Compos Sci Technol. 2002;62(3):371–378. doi:10.1016/S0266-3538(01)00202-0
