Cure kinetics of a friction material with different proportions of rubber/resin as organic binders are investigated. The effect of including two different phenolic resins with different B-transformation times is also analysed. An experimental characterisation is done using both a moving die rheometer and an industrial press. Then, predictive models based on Kamal–Sourour, Isayev, and Claxton–Liska equations are defined. Results showed that a higher amount of resin delivered lower induction times and better fitted phenomenological methods. Higher content of resin and resin with lower B-transformation time led to faster curing reactions at laboratory and industrial scales. Samples with no resin presented an induction time that greatly depended on temperature and fitted worse than the models.
SmalesH.Friction materials—black art or science?Proc Inst Mech Eng Part J Automob Eng. 1995; 209 ( 3 ): 151–157. doi: 10.1243/PIME_PROC_1995_209_200_02.
3.
BijweJ.Composites as friction materials: recent developments in non-asbestos fiber reinforced friction materials? A review. Polym Compos. 1997; 18 ( 3 ): 378–396. doi: 10.1002/pc.10289.
4.
WasilewskiP.Full-scale dynamometer test of composite railway brake shoes – study on the effect of the reinforcing fibre type. Acta Mech Autom. 2018; 12 ( 3 ): 204–208.
5.
NawangsariP, JamasriJ; RochardjoHSB.Effect of phenolic resin on density, porosity, hardness, thermal stability, and friction Performance as a binder in non-asbestos organic brake pad. IOP Conf Ser Mater Sci Eng. 2019; 547: 012012. doi: 10.1088/1757-899X/547/1/012012.
6.
YangH, LuoR, HanS, Effect of the ratio of graphite/pitch coke on the mechanical and tribological properties of copper–carbon composites. Wear. 2010; 268 ( 11–12 ): 1337–1341. doi: 10.1016/j.wear.2010.02.007.
7.
SaffarA, ShojaeiA.Effect of rubber component on the performance of brake friction materials. Wear. 2012 (274-275): 286–297. doi: 10.1016/j.wear.2011.09.012.
SunJ, ZhuXF, WangXB, Curing kinetics of phenol formaldehyde resin modified with sodium silicate. Appl Mech Mater. 2012; 184–185: 1471–1479. https://doi.org/10.4028/www.scientific.net/AMM.184-185.1471.
14.
Curing kinetics of phenol-formaldehyde resins. Thermal Analysis Application No. UC 193. Application published in METTLER TOLEDO Thermal alnalysis UserCom 19.
15.
BijweJ, Nidhi, MajumdarN, SatapathyBK.Influence of modified phenolic resins on the fade and recovery behavior of friction materials. Wear. 2005; 259 ( 7–12 ): 1068–1078. doi: 10.1016/j.wear.2005.01.011.
16.
Nidhi, BijweJ, MazumdarN.Influence of amount and modification of resin on fade and recovery behavior of non-asbestos organic (NAO) friction materials. Tribol Lett. 2006; 23 ( 3 ): 215–222. doi: 10.1007/s11249-006-9055-2.
17.
CoxR.Chapter 3 Sliding wear. In: Engineered tribological composites. Book News Inc. Portland: SAE; 2012. p. 33–59.
18.
WeintraubMH, BernardJP.Chemical and functional responses to brake lining cure variations. SAE Trans. 1968; 77: 1466–1473.
19.
BudionoHS, SurojoE, MuhayatN, Effect of post curing method on flexural strength of composite friction brake. MATEC Web Conf. 2018; 159: 02008. doi: 10.1051/matecconf/201815902008.
20.
ChenZN, DingQJ, ZhaoCS.Studies on cure kinetics of epoxy friction material for ultrasonic motor. J Nanjing Univ. 2010; 46 ( 1 ): 41–46.
ClaxtonWE, LiskaJW.Calculation of state of cure in rubber under variable time-temperature conditions. Rubber Age. 1964; 95 ( 2 ): 237.
23.
CaladoVMA, AdvaniSG.Thermoset resin cure kinetics and rheology. In: DavéRS, LoosAC, editors. Processing of composites. Cincinati/Munich: Carl Hanser Verlag GmbH & Co. KG; 2000. p. 32–107.
24.
AblizD, ArtysT, ZiegmannG.Influence of model parameter estimation methods and regression algorithms on curing kinetics and rheological modelling. J Appl Polym Sci. 2017; 134 ( 30 ): 45137. doi: 10.1002/app.45137.
25.
ASTM E2070-13. Standard test method for kinetic parameters by differential scanning calorimetry using isothermal methods. West Conshohocken (PA): ASTM International. 2013. www.astm.org (last accessed January 2021).
26.
KamalMR, SourourS.Kinetics and thermal characterization of thermoset cure. Polym Eng Sci. 1973; 13 ( 1 ): 59–64. doi: 10.1002/pen.760130110.
