This study investigates and quantifies the water absorption behaviour of hydrophobic carbon black in the 75IIR/25EPDM blend by keeping 5 × 2.5 × 0.2 cm samples in distilled water over three months. We utilise HAF (N-326) at concentrations of 50, 60, and 70 phr as filler for 75IIR/25EPDM blend. Samples are masticated carefully and then molded under a hot hydraulic press. The effect of water absorption by un-filled and filled samples is described using two fitting models: the logistic and the two-exponential growth models. The results show the water absorption has non-Fickian behaviour for all samples, and water uptake increases continuously. The rate of the uptake is found to be minimum for the sample with HAF-concentration of 60 phr.
GunterWD.Butyl and halogenated butyl rubbers, chapter 6. In: WhelanA, LeeKS, editors. Developments in rubber technology —2. The developments series Vol. 37. Dordrecht: Springer; 1981. p. 155–202. http://sci-hub.tw/10.1007/978-94-009-8108-9_6.
2.
KhalilA, NizamiSS, RazaNZ, Cure characteristics, mechanical and swelling properties of marble sludge filled EPDM modified chloroprene rubber blends. Adv Mater Phys Chem. 2012; 2 ( 02 ): 90–97.
3.
ZielińskaM, SeygerR, DierkesWK, Swelling of EPDM-rubbers for oil-well applications as influenced by medium composition and temperature. part I: literature and theoretical background. Elastomery. 2016; 20 ( 2 ): 6–17.
4.
AbhimanyuP, CoolbaughT.Elastomers: A literature review with emphasis on oil resistance. Rubber Chem Technol. 2005; 78 ( 3 ): 516–535.
StelescuMD, AirineiA, ManailaE, Effects of electron beam irradiation on the mechanical, thermal, and surface properties of some EPDM/butyl rubber composites. Polymers. 2018; 10 ( 11 ): 1206.
7.
HanhiK, PoikelispM, TirilH-M.Elastomeric materials. Finland: Tampere University of Technology the Laboratory of Plastics and Elastomer Technology; 2007.
8.
Environment Canada Health Canada. Carbon Black, Screening Assessment for the Challenge. Chemical Abstracts Service Registry Number. 2013; 1333-86-4.
SchultzJ, PapirerE, JacquemartC.Mechanism of diffusion of water in carbon black filled polymers. Eur Polym J. 1986; 22 ( 6 ): 499–503.
11.
ApicellaA, NicolaisL, MikolsWJ, In: SeferisJC, TheocarisPS, editor. Interrelations between processing structure and properties of polymeric materials. Amsterdam: Elsevier; 1984; p. 629.
12.
ApicellaA, NicolaisL, de CataldisC.Characterization of the morphological fine structure of commercial thermosetting resins through hygrothermal experiments. In: KaushHH, ZachmanHG, editor. Characterization of Polymers in the Solid State I: part A: NMR and Other Spectroscopic Methods Part B: Mechanical Methods, Berlin, Heidelberg: Springer; 1985; 66; p.189.
13.
George CS, ThomasS.Transport phenomena through polymeric systems. Prog Poly Sci M. 2001; 26 ( 6 ): 985–1017.
KhalilHPSA, NorimanNZ, AhmadMN, Polyester composites filled carbon black and activated carbon from bamboo (gigantochloa scortechinii): physical and Mechanical properties. J Reinf Plast Compos. 2007; 26 ( 3 ): 305–320.
24.
EkinN, IçduyguMG, GültekA.Investigation of long-term water absorption behavior of carbon fabric reinforced epoxy composites containing hydrophobic nanosilica. Turk J Chem. 2016; 40: 321–331.
25.
Gorkem GulogluE, Youssef HamidiK, Cengiz AltanM.Fast recovery of non-Fickian moisture absorption parameters for polymers and polymer composites. Polym Eng Sci. 2017; 57 ( 9 ): 921–931.
26.
WongKJ.Moisture absorption characteristics and effects on mechanical behavior of carbon/epoxy composite: application to bonded patch repairs of composite structures [ Ph.D. thesis ]. Bourgogne University; 2013.
27.
OttoliniLM, d'AlmeidaJRM.Evaluation of moisture absorption effects on mechanical behavior of hybrid glass/carbon fibers epoxy matrix composites. 4th Brazilian Conference on Composite Materials; 2018 July 22nd–25th; Rio de Janeiro.
28.
ASTM D 3182-89. Rubber—materials, equipment, and procedures for mixing standard compounds and preparing standard vulcanized sheets. West Conshohocken. PA 19428-2959. United States: ASTM International; 2001.
29.
ASTM D471. Standard test method for rubber property-effect of liquids. West Conshohocken. PA 19428-2959. United States: ASTM International; 1998; p. 471.
30.
Fan úXJ, SuhirE.Moisture sensitivity of plastic packages of IC devices: Chapter 2. In: ShirangiMH, MichelB, editor. Mechanism of moisture diffusion, hygroscopic swelling, and adhesion degradation in epoxy molding compounds. Springer; 2010; pp. 29–69.
31.
ShirangiMH, AuerspergJ, KoyuncuM, Characterization of dual-stage moisture diffusion, residual moisture content and hygroscopic swelling of epoxy molding compounds. 9th EuroSimE 2008- International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems. Freiburg im Breisgau. Germany. 2008; 1-8. DOI: 10.1109/ESIME.2008.4525009.
32.
JacobsPM, JonesFR.. Diffusion of moisture into two-phase polymers. J Mater Sci. 1989; 24 ( 7 ): 2331–2336. http://scihub.tw/10.1007/BF01174494.
ZhangW, Dehghani-SanijAA, BlackburnR.Carbon based conductive polymer composites. J Mat Sci. 2007; 42 ( 10 ): 3408–3418.
38.
ZhangY, NarayananA, MugeleF, Colloids Surf A. 2016; 489: 461–468.
39.
HanadaY, MasudaS, IijimaM, Analysis of dispersion and aggregation behavior of carbon black particles in aqueous suspension by colloid probe AFM method. Adv Powder Tech. 2013; 24 ( 5 ): 844–851.
40.
FukahoriY.Generalized concept of the reinforcement of elastomers. Part 1: carbon black reinforcement of rubbers. Rubb Chem Tech. 2007; 80 ( 4 ): 701–725.
41.
Van AmerongemGJ.J Polym Sci.1950; 5 ( 3 ): 307–332.
42.
LinYN, AlexandridisP.Temperature-dependent adsorption of pluronic F127 block copolymers onto carbon black particles dispersed in aqueous media. J Phys Chem B. 2002; 106 ( 42 ): 10834–10844.
43.
ASTM D3053 - 20a. Standard Terminology Relating to Carbon Black. 2004; 04: 3053.
