This study investigated the effect of Sm additions on the microstructure, thermal conductivity, and mechanical properties of Mg-Zn-Zr alloy. The results indicate that the addition of Sm led to the formation of a rare-earth phase at the grain boundaries, and the grain size was significantly refined in the extruded state. The thermal conductivity of Mg alloy increased with the increase in Sm content because of the formation of a rare-earth phase that helps to dissolve the Zn atoms in the α-Mg matrix. Moreover, the as-extruded Mg alloy exhibited a higher thermal conductivity (up to124 W (m K)−1) than its as-cast counterparts. The Sm-containing as-extruded Mg alloy showed excellent yield strength of up to 254 MPa, and also a good plastic deformation ability.
PanH, RenY, FuH, Recent developments in rare-earth free wrought magnesium alloys having high strength: a review. J Alloys Compd. 2016;663:321–331. doi: 10.1016/j.jallcom.2015.12.057
3.
TouloukianYS.Thermal conductivity: metallic elements and alloys. New York ( NY): Plenum Press; 1970. p. 20–50.
4.
PanH, PanF, WangX, Correlation on the electrical and thermal conductivity for binary Mg-Al and Mg-Zn alloys. Int J Thermophys. 2013;34:1336–1346. doi: 10.1007/s10765-013-1490-3
5.
LeeS, HamHJ, KwonSY, Thermal conductivity of magnesium alloys in the temperature range from −125°C to 400°C. Int J Thermophys. 2013;34:2343–2350. doi: 10.1007/s10765-011-1145-1
6.
RudajevováA, StaněkM, LukáčP.Determination of thermal diffusivity and thermal conductivity of Mg-Al alloys. Mater Sci Eng A. 2003;341:152–157. doi: 10.1016/S0921-5093(02)00233-2
7.
RudajevováA, LukáčP.Comparison of the thermal properties of AM20 and AS21 magnesium alloys. Mater Sci Eng A. 2005;397:16–21. doi: 10.1016/j.msea.2004.12.036
8.
RudajevováA, KúdelaS, StaněkM, Thermal properties of Mg-Li and Mg-Li-Al alloys. Mater Sci Technol. 2003;19:1097–1100. doi: 10.1179/026708303225004648
9.
PanH, PanF, YangR, Thermal and electrical conductivity of binary magnesium alloys. J Mater Sci. 2014;49:3107–3124. doi: 10.1007/s10853-013-8012-3
10.
PanH, PanF, WangX, High conductivity and high strength Mg-Zn-Cu alloy. Mater Sci Technol. 2014;30:759–764. doi: 10.1179/1743284713Y.0000000400
11.
PanH, PanF, YangR, Thermal and electrical conductivity of Mg-Zn-Al alloys. Mater Sci Technol. 2014;30:988–994. doi: 10.1179/1743284713Y.0000000401
12.
YuanJ, ZhangK, LiT, Anisotropy of thermal conductivity and mechanical properties in Mg-5Zn-1Mn alloy. Mater Des. 2012;40:257–261. doi: 10.1016/j.matdes.2012.03.046
13.
PanH.Investigations on thermal conductivity of magnesium alloys [PhD thesis]. Chongqing University; 2013. p. 39–41. (in Chinese).
14.
PengJ, ZhongL, WangY, Effect of extrusion temperature on the microstructure and thermal conductivity of Mg-2.0Zn-1.0Mn-0.2Ce alloys. Mater Des. 2015;87:914–919. doi: 10.1016/j.matdes.2015.08.043
15.
PengJ, ZhongL, WangY, Effect of Ce addition on thermal conductivity of Mg-2Zn-1Mn alloy. J Alloys Compd. 2015;639:556–562. doi: 10.1016/j.jallcom.2015.03.197
16.
ZhongL, PengJ, LiM, Effect of Ce addition on the microstructure, thermal conductivity and mechanical properties of Mg–0.5Mn alloys. J Alloys Compd. 2016;661:402–410. doi: 10.1016/j.jallcom.2015.11.107
17.
SumidaM, JungS, OkaneT.Solidification microstructure, thermal properties and hardness of magnesium alloy 20 mass% Gd added AZ91D. Mater Trans. 2009;50:1161–1168. doi: 10.2320/matertrans.F-M2009802
18.
LiL, LiSY, LiDJ, CHN, Patent No. CN105986157 A. 2016. (in Chinese).
19.
RudajevováA.Thermal diffusivity and thermal conductivity of Ni53.6Mn27.1Ga19.3 shape memory alloy. Int J Therm Sci. 2008;47:1243–1248. doi: 10.1016/j.ijthermalsci.2007.10.009
20.
SuX, LiDJ, XieYC, Effect of Sm on the microstructure and mechanical property of Mg-xSm-0.4Zn-0.3Zr alloys. Mater Sci Forum. 2013;747–748:238–244. doi: 10.4028/www.scientific.net/MSF.747-748.238
21.
XiaX, SunW, LuoAA, Precipitation evolution and hardening in Mg Sm Zn Zr alloys. Acta Mater. 2016;111:335–347. doi: 10.1016/j.actamat.2016.03.068
22.
YamasakiM, KawamuraY.Thermal diffusivity and thermal conductivity of Mg-Zn-rare earth element alloys with long-period stacking ordered phase. Scr Mater. 2009;60:264–267. doi: 10.1016/j.scriptamat.2008.10.022
23.
BurgerN, LaachachiA, FerriolM, Review of thermal conductivity in composites: mechanisms, parameters and theory. Prog Polym Sci. 2016;61:1–28. doi: 10.1016/j.progpolymsci.2016.05.001
24.
MohrM, DaccacheL, HorvatS, Influence of grain boundaries on elasticity and thermal conductivity of nanocrystalline diamond films. Acta Mater. 2017;122:92–98. doi: 10.1016/j.actamat.2016.09.042
25.
PanH, PanF, PengJ, High-conductivity binary Mg-Zn sheet processed by cold rolling and subsequent aging. J Alloys Compd. 2013;578:493–500. doi: 10.1016/j.jallcom.2013.06.082
26.
YingT, ZhengMY, LiZT, Thermal conductivity of as-cast and as-extruded binary Mg-Zn alloys. J Alloys Compd. 2015;621:250–255. doi: 10.1016/j.jallcom.2014.09.199
27.
SonHT, LeeJS, KimDG, Effects of samarium (Sm) additions on the microstructure and mechanical properties of as-cast and hot-extruded Mg-5wt%Al-3wt%Ca-based alloys. J Alloys Compd. 2009;473:446–452. doi: 10.1016/j.jallcom.2008.06.016
