The nanofiller improve the properties of the pristine polymer resins to the great extent. In present findings, the preparation of nanocomposites (epoxy/PNCC/LDHs) was done by the ‘Slurry-compounding method’. Precipitated nano-calcium carbonate (PNCC) were mixed with Layer double hydroxides (LDHs) in varying ratio and added to epoxy resin with constant stirring at room temperature. The degree of distribution of the nanofiller and the kind of polymeric nanocomposites formed was observed by Wide-angle X-ray Diffraction, and Scanning Electron Microscopy. The thermal and mechanical properties of epoxy nanocomposites were characterised by Thermogravimetric analysis and Universal Testing Machine, respectively. However, harmonisation and coactive influence of PNCC with LDHs showed a better effect on the mechanical and thermal properties of epoxy resin and offers superior mechanical and thermal properties as compared to pristine epoxy resin and two-component ( Epoxy/PNCC) nanocomposites.
ItohT, OhtaN, ShichiT, The self-assembling properties of stearate ions in hydrotalcite clay composites. Langmuir. 2003; 19 ( 22 ): 9120–9126. DOI: 10.1021/la0302448.
12.
El-SheikhSM, BarhoumA, El-SherbinyS, Preparation of superhydrophobic nanocalcite crystals using Box–Behnken design. Arabian J Chem. 2014: 1479–1486. DOI: 10.1016/j.arabjc.2014.11.003.
13.
BalaH, DingX, GuoY, Multigram scale synthesis and characterization of monodispersed cubic calcium carbonate nanoparticles. Mater Lett. 2006; 60 ( 12 ): 1515–1518. DOI: 10.1016/j.matlet.2005.11.062.
14.
IhliJ, WongWC, NoelEH, Dehydration and crystallization of amorphous calcium carbonate in solution and in air. Nat Commun. 2004; 5 ( 1 ): 1–10. DOI: 10.1038/ncomms4169.
15.
El-SheikhSM, El-SherbinyS, BarhoumA, Effects of cationic surfactant during the precipitation of calcium carbonate nano-particles on their size, morphology, and other characteristics. Colloids Surf A. 2013; 422: 44–49. DOI: 10.1016/j.colsurfa.2013.01.020.
16.
JinFL, ParkSJ.Thermo-mechanical behaviors of butadiene rubber reinforced with nano-sized calcium carbonate. Mater Sci Eng A. 2008; 478 ( 1–2 ): 406–408. DOI: 10.1016/j.msea.2007.05.102.
AngadiG, MurthyHNN, RamakrishnaS, Effect of screw configuration on the dispersion of nanofillers in thermoset polymers. J Polym. 2017; 37 ( 8 ): 815–825. DOI: 10.1515/polyeng-2015-0427.
19.
PrabhuP, Mohamed IqbalS, BalajiA, Experimental investigation of mechanical and machining parameters of hybrid nanoclay glass fiber-reinforced polyester composites. Adv Compos Hybrid Mater. 2018; 2: 93–101. DOI: 10.1007/s42114-018-065-y.
20.
RiceBP, ChenC, CloosL, Organoclay-aerospace epoxy nanocomposites. I–Carbon fiber composites. part I. Sampe J. 2001; 37 ( 5 ): 7–9.
21.
MiyagawaH, JurekRJ, MohantyAK, Biobased epoxy/clay nanocomposites as a new matrix for CFRP. Compos A Appl S. 2006; 37 ( 1 ): 54–62. DOI: 10.1016/j.compositesa.2005.05.014.
22.
ManfrediLB, De SantisH, VázquezA.Influence of the addition of montmorillonite to the matrix of unidirectional glass fibre/epoxy composites on their mechanical and water absorption properties. Compos A: Appl Sci Manuf. 2008; 39 ( 11 ): 1726–1731. DOI: 10.1016/j.compositesa.2008.07.016.
WangX, ZhouS, XingW, Self-assembly of Ni–Fe layered double hydroxide /graphene hybrids for reducing fire hazard in epoxy composites. J MaterChem. 2013; 1 ( 13 ): 4383–4390. DOI: 10.1039/c3ta00035d.
25.
CuiZ, QuB.Synergistic effects of layered double hydroxide with phosphorus-nitrogen intumescent flame retardant in PP/EPDM/IFR/LDH nanocomposites. Chin J Polym Sci. 2010; 28 ( 4 ): 563–571. DOI: 10.1007/s10118-010-9095-9.
26.
AhamadA, PatilCB, GiteVV, Evaluation of the synergistic effect of layered double hydroxides with micro- and nano-CaCO3 on the thermal stability of polyvinyl chloride composites. J Thermoplast Compos. 2012; 26 ( 9 ): 1249–1259. DOI: 10.1177/0892705712446716.
27.
WetzelB, HaupertF, Qiu ZhangM.Epoxy nanocomposites with high mechanical and tribological performance. Compos Sci Technol. 2013; 63 ( 14 ): 2055–2067. DOI: 10.1016/s0266-3538(03)00115-5.
28.
NevareMR, GiteVV, MahulikarPP, Synergism between LDH and Nano-Zinc Phosphate on the Flammability and mechanical properties of polypropylene. Polym Plast Technol Engg. 2014; 53 ( 5 ): 429–434. DOI: 10.1080/03602559.2013.844244.
MishraS, SonawaneSH, SinghRP.Studies on characterization of nano CaCO3 prepared by thein situ deposition technique and its application in PP-nano CaCO3 composites. J Polym Sci, Part B: Polym Phys. 2004; 43 ( 1 ): 107–113. DOI: 10.1002/polb.20296.
31.
LeuteritzA, KutluB, MeinlJ, Layered double hydroxides (LDH): a multifunctional versatile system for nanocomposites. Mol Cryst Liq Cryst. 2012; 556 ( 1 ): 107–113. DOI: 10.1080/15421406.2012.635923.
32.
YangX, XuG, ChenY, CaCO3 crystallization control by poly(ethylene oxide)–Poly (propylene oxide)–poly(ethylene oxide) triblock copolymer and O-(hydroxy isopropyl) hitosan. J Cryst Growth. 2009; 311 ( 21 ): 4558–4569. DOI: 10.1016/j.jcrysgro.2009.08.025.
33.
CamposJSC, RibeiroAA, CardosoCX.Preparation and characterization of PVDF/CaCO3 composites. Mater Sci Eng B. 2007; 136 ( 2–3 ): 123–128. DOI: 10.1016/j.mseb.2006.09.017.
34.
LinLY, LeeJH, HongCE, Preparation and characterization of layered Silicate /glass fiber/epoxy hybrid nanocomposites via vacuum-assisted resin transfer molding (VARTM). Compos Sci Technol. 2006; 66 ( 13 ): 2116–2125. DOI: 10.1016/j.compscitech.2005.12.025.
YasminA, LouJJ, AbotJL.Mechanical and thermal behavior of clay/epoxy nanocomposites. Compos Sci Technol. 2006; 66 ( 14 ): 2415–2422. DOI: 10.1016/j.compscitech.2006.03.011.
38.
ZulfliNMH, BakarAA, ChowWS.Mechanical and thermal properties improvement of nano calcium carbonate-filled epoxy/glass fiber composite laminates. High Perform Polym. 2013; 26 ( 2 ): 223–229. DOI: 10.1177/0954008313507961.
39.
ChenW, QuB.Structural Characteristics and thermal properties of PE-g-MA/MgAl-L exfoliation nanocomposites synthesized by solution intercalation. Chem Mater. 2003; 15 ( 16 ): 3208–3213. DOI: 10.1021/cm030044h.
40.
PatilAA, PatilCB, MahulikarPP.Impact of synergism of LDH with PNCC on the thermal and mechanical properties of polyester nanocomposites. Polym Plast Technol and Mater. 2019: 1–10. DOI: 10.1080/25740881.2019.1698614.
41.
AlamriH, LowIM.Effect of water absorption on the mechanical properties of nano-filler reinforced epoxy nanocomposites. Mater Desig. 2012; 42: 214–222. DOI: 10.1016/j.matdes.2012.05.060.
