The development of new radar-absorbing structures (RASs) with strong microwave absorption, fine thickness and adequate structural performance is imperative. Herein, nanocrystalline Ni0.5Zn0.5Fe2O4 was synthesised by a facile and effective sol–gel autocombustion technique. The structural and magnetic properties of ferrite were determined by various characterisation techniques, and E-glass/epoxy-based nanocomposites with different weight percentages of ferrite were fabricated by in-situ polymerisation. Further, electromagnetic properties were investigated to elucidate the possible absorption mechanism of the fabricated structures. The 4-mm-thick double-layered E-glass/epoxy/nickel–zinc ferrite composites exhibited reflection loss (RL) of <−10 dB for a bandwidth of 2.4 GHz and a maximum RL of −33 dB at 9.6 GHz. This performance was attributed to the larger magnetic loss and sufficient matching of electromagnetic parameters. This study provides a unique insight into the utilisation of Ni0.5Zn0.5Fe2O4 for producing lightweight and relatively thin RASs in the X-band at a low cost.
MicheliD, MarchettiM.Mitigation of human exposure to electromagnetic fields using carbon foam and carbon nanotubes. Engineering. 2012; 04 ( 12 ): 928–943. https://doi.org/10.4236/eng.2012.412a118.
2.
VermaP, SainiP, MalikRS, Excellent electromagnetic interference shielding and mechanical properties of high loading carbon-nanotubes/polymer composites designed using melt recirculation equipped twin-screw extruder. Carbon N. Y. Aug. 2015; 89: 308–317. https://doi.org/10.1016/j.carbon.2015.03.063.
3.
LeeTW, LeeSE, JeongYG.Highly effective electromagnetic interference shielding materials based on silver nanowire/cellulose papers. ACS Appl Mater Interfaces. May 2016; 8 ( 20 ): 13123–13132. https://doi.org/10.1021/acsami.6b02218.
LiuP, YaoZ, ZhouJ, Small magnetic Co-doped NiZn ferrite/graphene nanocomposites and their dual-region microwave absorption performance. J Mater Chem C. 2016; 4 ( 41 ): 9738–9749. https://doi.org/10.1039/c6tc03518c.
6.
WeiS, YanR, ShiB, Characterization of flexible radar-absorbing materials based on ferromagnetic nickel micron-fibers. J Ind Text. Jul. 2019; 49 ( 1 ): 58–70. https://doi.org/10.1177/1528083718772304.
7.
SanthosiBVSRN, RamjiK, RaoNBRM, Comparative study of polymer-based nanocomposites microwave absorption performance in X-band. Mater Res Express. 2019; 7 ( 1 ), https://doi.org/10.1088/2053-1591/ab621e.
8.
YangRB, LiangWF, ChangCC, Complex dielectric permittivity and magnetic permeability of Fe/Fe 3O4 composite particles in 2–18 GHz. Ferroelectrics. 2012; 434 ( 1 ): 77–82. https://doi.org/10.1080/00150193.2012.732488.
9.
WenX, KellySJ, AndrewJS, Nickel-zinc ferrite/permalloy (Ni0.5Zn0.5Fe2O4/Ni–Fe) soft magnetic nanocomposites fabricated by electro-infiltration. AIP Adv. May 2016; 6 ( 5 ), https://doi.org/10.1063/1.4943415.
10.
NaiduMK, RamjiK, SanthosiBVSRN, Influence of NiFe alloy nanopowder on electromagnetic and microwave absorption properties of MWCNT/epoxy composite. Adv Polym Technol. Mar. 2018; 37 ( 2 ): 622–628. https://doi.org/10.1002/adv.21703.
11.
JiaoY, LiJ, XieA, Confined polymerization strategy to construct polypyrrole/zeolitic imidazolate frameworks (PPy/ZIFs) nanocomposites for tunable electrical conductivity and excellent electromagnetic absorption. Compos Sci Technol. 2019; 174: 232–240. https://doi.org/10.1016/j.compscitech.2019.03.003.
12.
XieA, WuF, XuZ, In situ preparation of ultralight three-dimensional polypyrrole/nano SiO2 composite aerogels with enhanced electromagnetic absorption. Compos Sci Technol. 2015; 117: 32–38. https://doi.org/10.1016/j.compscitech.2015.05.010.
13.
QuanB, LiangX, JiG, Cross-linking-derived synthesis of porous CoxNiy/C nanocomposites for excellent electromagnetic behaviors. ACS Appl Mater Interfaces. 2017; 9 ( 44 ): 38814–38823. https://doi.org/10.1021/acsami.7b13411.
MandalA, GhoshD, MalasA, Synthesis and microwave absorbing properties of Cu-doped nickel zinc ferrite/Pb(Zr0.52Ti0.48)O3 nanocomposites. J Eng. UK. 2013; 2013; https://doi.org/10.1155/2013/391083.
17.
ChoiI, KimJG, SeoIS, Radar absorbing sandwich construction composed of CNT, PMI foam and carbon/epoxy composite. Compos Struct. Sep. 2012; 94 ( 9 ): 3002–3008. https://doi.org/10.1016/j.compstruct.2012.04.009.
18.
ChoiWH, KimCG.Broadband microwave-absorbing honeycomb structure with novel design concept. Compos Part B Eng. Dec. 2015; 83: 14–20. https://doi.org/10.1016/j.compositesb.2015.08.027.
19.
ChoiI, LeeD, LeeDG.Hybrid composite low-observable radome composed of E-glass/aramid/epoxy composite sandwich construction and frequency selective surface. Compos Struct. 2014; 117 ( 1 ): 98–104. https://doi.org/10.1016/j.compstruct.2014.06.031.
20.
RajuP, MurthySR.Preparation and characterization of Ni–Zn ferrite + polymer nanocomposites using mechanical milling method. Appl Nanosci Switzerland. Dec. 01, 2013; 3 ( 6 ): 469–475. https://doi.org/10.1007/s13204-012-0163-z.
21.
ParmarH, UpadhyayRV, RayaprolS, Structural and magnetic properties of nickel–zinc ferrite nanocrystalline magnetic particles prepared by microwave combustion method. Indian J Phys. Dec. 2014; 88 ( 12 ): 1257–1264. https://doi.org/10.1007/s12648-014-0576-5.
22.
KurianM, NairDS.Effect of preparation conditions on nickel zinc ferrite nanoparticles: a comparison between sol–gel auto combustion and co-precipitation methods. J Saudi Chem Soc. Sep. 2016; 20: S517–S522. https://doi.org/10.1016/j.jscs.2013.03.003.
23.
SagadevanS, ChowdhuryZZ, RafiqueRF.Preparation and characterization of nickel ferrite nanoparticles via co-precipitation method. Mater Res. 2018; 21 ( 2 ), https://doi.org/10.1590/1980-5373-mr-2016-0533.
24.
GhodakeJS, KambaleRC, ShindeTJ, Magnetic and microwave absorbing properties of Co2+ substituted nickel-zinc ferrites with the emphasis on initial permeability studies. J Magn Magn Mater. Mar. 2016; 401: 938–942. https://doi.org/10.1016/j.jmmm.2015.11.009.
25.
Ngoc AnhL, Thanh LoanT, Phuc DuongN, Single phase formation, cation distribution, and magnetic characterization of coprecipitated nickel-zinc ferrites. Anal Lett. Aug. 2015; 48 ( 12 ): 1965–1978. https://doi.org/10.1080/00032719.2014.1003430.
26.
PanH, ChengX, GongC, Preparation of (Fe xNi1–x)4N (0.5 ≤ x ≤ 0.8) compounds and evaluation of their magnetic and microwave absorbing properties. J Appl Phys. 2013; 113 ( 11 ): 0–6. https://doi.org/10.1063/1.4794177.
27.
WillardMA, KuriharaLK, CarpenterEE, Chemically prepared magnetic nanoparticles. Int Mater Rev. Jun. 2004; 49 ( 3–4 ): 125–170. https://doi.org/10.1179/095066004225021882.
28.
KhanK, RehmanS.Microwave absorbance properties of zirconium-manganese substituted cobalt nanoferrite as electromagnetic (EM) wave absorbers. Mater Res Bull. 2014; 50: 454–461. https://doi.org/10.1016/j.materresbull.2013.11.018.
29.
YanX, XueD.Fabrication and microwave absorption properties of Fe0.64Ni0.36-NiFe2O4 nanocomposite. Nano-Micro Lett. 2012; 4 ( 3 ): 176–179. https://doi.org/10.1007/BF03353710.
30.
NagasreePS, RamjiK, MurthyKK, Fibre reinforced polymer (FRP) nanocomposites for radar absorption application in the X-band. Lect Notes Mech Eng. 2020: 409–418. https://doi.org/10.1007/978-981-15-1124-0_35.
31.
Siva NagasreeP, RamjiK, HarithaT, Polymer based MWCNT/nickel zinc ferrite nanocomposites for RAS application with simulation. Mater Today Proc. 2019; 18: 406–412. https://doi.org/10.1016/j.matpr.2019.06.318.
32.
HarithaT, RamjiK, MurthyKK, Synthesis and microwave absorption properties of MnZn ferrite nanocomposite. Lect Notes Mech Eng. 2020: 419–429. https://doi.org/10.1007/978-981-15-1124-0_36.
33.
TammareddyH, RamjiK, NagaSreePS, Complex permittivity, permeability and microwave absorbing properties of PANI coated MWCNTs/ manganese zinc ferrite nanocomposite. Mater Today Proc2019; 18: 420–425. https://doi.org/10.1016/j.matpr.2019.06.320.
34.
DasS, NayakGC, SahuSK, Microwave absorption properties of double-layer composites using CoZn/NiZn/MnZn-ferrite and titanium dioxide. J Magn Magn Mater. Mar. 2015; 377: 111–116. https://doi.org/10.1016/j.jmmm.2014.10.059.
35.
TyagiS, BaskeyHB, AgarwalaRC, Development of hard/soft ferrite nanocomposite for enhanced microwave absorption. Ceram Int. Sep. 2011; 37 ( 7 ): 2631–2641. https://doi.org/10.1016/j.ceramint.2011.04.012.
36.
WangZ, YangW, LvQ, Ferromagnetic and excellent microwave absorbing properties of CoNi microspheres and heterogeneous Co/Ni nanocrystallines. RSC Adv. 2019; 9 ( 24 ): 13365–13371. https://doi.org/10.1039/c9ra02013f.
37.
GuanPF, ZhangXF, GuoJJ.Assembled Fe3O4 nanoparticles on graphene for enhanced electromagnetic wave losses. Appl Phys Lett. Oct. 2012; 101 ( 15 ), https://doi.org/10.1063/1.4758931.
38.
SmithaP, SinghI, NajimM, Development of thin broad band radar absorbing materials using nanostructured spinel ferrites. J Mater Sci Mater Electron. 2016; 27 ( 8 ): 7731–7737. https://doi.org/10.1007/s10854-016-4760-6.
39.
KothawaleMM, TangsaliRB, NaikGK, Characterization and magnetic properties of nanoparticle Ni1-xZnxFe2O4 ferrites prepared using microwave assisted combustion method. J Supercond Nov Magn. 2012; 25 ( 6 ): 1907–1911. https://doi.org/10.1007/s10948-012-1510-8.
40.
CrespoM, GonzálezM, PozueloJ.Magnetic silica:epoxy composites with a nano- and micro-scale control. Mater Chem Phys. 2014; 144 ( 3 ): 335–342. https://doi.org/10.1016/j.matchemphys.2013.12.049.
41.
LiuP, YaoZ, ZhouJ.Controllable synthesis and enhanced microwave absorption properties of silane-modified Ni0.4Zn0.4Co0.2Fe2O4 nanocomposites covered with reduced graphene oxide. RSC Adv. Oct. 2015; 5 ( 114 ): 93739–93748. https://doi.org/10.1039/c5ra18668d.
WanG, LuoY, WuL, The fabrication and high-efficiency electromagnetic wave absorption performance of CoFe/C core–shell Structured nanocomposites. Nanoscale Res Lett. 2018; 13; https://doi.org/10.1186/s11671-018-2474-9.
44.
LuB, HuangH, DongXL, Influence of alloy components on electromagnetic characteristics of core/shell-type Fe–Ni nanoparticles. J Appl Phys. 2008; 104 ( 11 ), https://doi.org/10.1063/1.3040006.
45.
HuangX, ZhangJ, XiaoS, The cobalt zinc spinel ferrite nanofiber: lightweight and efficient microwave absorber. J Am Ceram Soc. 2014; 97 ( 5 ): 1363–1366. https://doi.org/10.1111/jace.12909.
46.
SongTH, ChoiWH, ShinJH, Flexible design of dual-band radar-absorbing composites by controllable permittivity. Int J Aeronaut Sp Sci. 2019; 20 ( 2 ): 368–371. https://doi.org/10.1007/s42405-019-00143-y.
47.
SinghS, SinhaA, ZunkeRH, Double layer microwave absorber based on Cu dispersed SiC composites. Adv Powder Technol. Sep. 2018; 29 ( 9 ): 2019–2026. https://doi.org/10.1016/j.apt.2018.05.008.
SanthosiBVSRN, RamjiK, RaoNBRM.Optimization of double layered graphene-based microwave absorber in X-band using Pareto genetic algorithm. Mater Res Express. Aug. 2019; 6 ( 10 ), https://doi.org/10.1088/2053-1591/ab398f.
50.
AdebayoLL, SoleimaniH, YahyaN, Investigation of the broadband microwave absorption of citric acid coated Fe3O4/PVDF composite using finite element method. Appl Sci. Sep. 2019; 9 ( 18 ), https://doi.org/10.3390/app9183877.
