In order to enhance properties of polylactic acid (PLA), its blend with polycarbonate (PC) and silica nanofiller were prepared and their properties were compared with neat PLA and PLA/PC alloy. To have a better exchange reaction between PLA and PC and also an enhanced dispersion of nanosilica throughout the organic polymeric matrix, tin(II) 2-ethylhexanoate (TEH) and poly(ethylene-co-glycidyl methacrylate) (PEGM) were used as two different compatibilisers for the transesterification reactions between PLA, PC and nanosilica and chemical grafting of PEGM to PLA, PC and nanosilica. Performed analyses including X-ray diffraction, transmission electron microscopy, differential scanning calorimetry, melt flow index, tensile and thermogravimetric analysis demonstrated that although PEGM, which contains reactive epoxide groups, has a positive effect to promote the properties of its related nanohybrid, the best results were obtained in the presence of TEH as an effective coordination catalyst. Results showed that an enhanced industrial nanocomposite alloy can be fabricated with this efficient catalyst.
HajibeygiM, ShabanianM.The effect of organo-modified silicate nanolayers on the oxygen and water vapor barrier properties of poly(lactic acid). J Chin Chem Soc. 2018; 65: 1340–1346. doi: 10.1002/jccs.201800058.
TriwulandariE, GhozaliM, SondariD, Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite. Plast Rubber Compos. 2019; 48: 82–92. doi: 10.1080/14658011.2018.1562746.
4.
LiH, CaoZ, WuD, Crystallisation, mechanical properties and rheological behaviour of PLA composites reinforced by surface modified microcrystalline cellulose. Plast Rubber Compos. 2016; 45: 181–187. doi: 10.1179/1743289815Y.0000000040.
5.
KetabchiMR, KhalidM, RatnamCT, Investigating the effects of processing parameters on poly(lactic acid) properties – a central composite design approach. Plast Rubber Compos. 2019; 48: 95–102. doi: 10.1080/14658011.2019.1570444.
6.
PengQ, ChengJ, LuS, Electrospun hyperbranched polylactic acid-modified cellulose nanocrystals/polylactic acid for shape memory membranes with high mechanical properties. Polym Adv Technol. 2020; 31: 15–24. doi: 10.1002/pat.4743.
7.
Nouri-AhangaraniF, NekoomaneshM, MirmohammadiSA, Effects of FeCl3 doping on the performance of MgCl2/TiCl4/DNPB catalyst in 1-hexene polymerization. Polyolefins J. 2017; 4: 253–262. doi: 10.22063/poj.2017.1467.
8.
HanifpourA, Bahri-LalehN, Nekoomanesh-HaghighiM, Poly1-hexene: new impact modifier in HIPS technology. J Appl Polym Sci. 2016; 133: 8508. doi: 10.1002/app.43882.
9.
ShirbakhtS, MirmohammadiSA, DidehbanK, Effects of monomer length on α-olefins polymerization using a conventional Ziegler–Natta catalyst. Adv Polym Tech. 2018; 37: 2588–2596. doi: 10.1002/adv.21934.
10.
NazariD, Bahri-LalehN, Nekoomanesh-HaghighiM, New high impact polystyrene: use of poly(1-hexene) and poly(1-hexene-co-hexadiene) as impact modifiers. Polym Adv Technol. 2018; 29: 1603–1612. doi: 10.1002/pat.4265.
11.
ShirbakhtS, Bahri-LalehN, MirmohammadiSA, Evaluation of GS-loaded poly1-hexene as a new elastomeric drug release system. Int J Polym Anal Char. 2019: 1–12. doi: 10.1080/1023666X.2019.1663599.
12.
KumarR.Blends of polylactic acid and arylated soy protein isolate with triacetine as plasticiser. Plast Rubber Compos. 2013; 42: 308–314. doi: 10.1179/1743289813Y.0000000052.
13.
LeeJB, LeeYK, ChoiGD, Compatibilizing effects for improving mechanical properties of biodegradable poly (lactic acid) and polycarbonate blends. Polym Degrad Stabil. 2011; 96: 553–560. doi: 10.1016/j.polymdegradstab.2010.12.019.
14.
SadjadiS, Bahri-LalehN, Nekoomanesh-HaghighiM, Rationalizing chain microstructure in the polyα-olefins synthesized by cationic AlCl3/H2O catalytic system. Int J Polym Anal Char. 2019; 24: 556–570. doi: 10.1080/1023666X.2019.1627027.
15.
HanifpourA, Bahri-LalehN, MirmohammadiSA.Silica-grafted poly1-hexene: a new approach to prepare polyethylene/silica nanocomposites. Polym Composite. 2019; 40: 1053–1060. doi: 10.1002/pc.24795.
16.
Bahri-LalehN, DidehbanK, YarahmadiE, Microwave absorption properties of polyaniline/carbonyl iron composites. Silicon. 2018; 10: 1337–1343. doi: 10.1007/s12633-017-9609-y.
17.
MirmohammadiSA, Nekoomanesh-HaghighiM, Mohammadian GezazS, In-situ photocrosslinkable nanohybrid elastomer based on polybutadiene/polyhedral oligomeric silsesquioxane. Mater Sci Eng C. 2016; 68: 530–539. doi: 10.1016/j.msec.2016.06.027.
18.
MirmohammadiSA, Nekoomanesh-HaghighiM, Mohammadian GezazS, Polybutadiene/polyhedral oligomeric silsesquioxane nanohybrid: investigation of various reactants in polyesterification reaction. Polym Int. 2016; 65: 516–525. doi: 10.1002/pi.5085.
MirmohammadiSA, ImaniM, UyamaH, The effects of solvent and initiator on anionic ring opening polymerization of ϵ-caprolactone: synthesis and characterization. Polym Int. 2014; 63: 479–485. doi: 10.1002/pi.4531.
21.
LiuS, LiY, SunH, Preparation and characterisation of a lamellar hydroxyapatite/polylactic acid composite. Plast Rubber Compos. 2019; 48: 66–73. doi: 10.1080/14658011.2018.1548191.
22.
MirmohammadiSA, ImaniM, UyamaH, Hybrid organic-inorganic nanocomposites based on poly(E-caprolactone)/polyhedral oligomeric silsesquioxane: synthesis and in vitro evaluations. Int J Polym Mater Polym Biomater. 2014; 63: 624–631. doi: 10.1080/00914037.2013.854236.
23.
MirmohammadiS, ImaniM, UyamaH, In situ photocrosslinkable nanohybrids based on poly(E-caprolactone fumarate)/polyhedral oligomeric silsesquioxane: synthesis and characterization. J Polym Res. 2013; 20: 1–13. doi: 10.1007/s10965-013-0297-z.
24.
HanifpourA, Bahri-LalehN, Nekoomanesh-HaghighiM, Synthesis and characterization of poly1-hexene/silica nanocomposites. Polym Test. 2017; 61: 27–34. doi: 10.1016/j.polymertesting.2017.05.002.
25.
LiX, AiX, PanH, The morphological, mechanical, rheological, and thermal properties of PLA/PBAT blown films with chain extender. Polym Adv Technol. 2018; 29: 1706–1717. doi: 10.1002/pat.4274.
26.
HedayatiF, Moshiri-GomchiN, Assaran-GhomiM, Preparation and properties of enhanced nanocomposites based on PLA/PC blends reinforced with silica nanoparticles. Polym Adv Technol. 2020; 31: 566–573. doi: 10.1002/pat.4797.
27.
PhuongVT, ColtelliM-B, CinelliP, Compatibilization and property enhancement of poly(lactic acid)/polycarbonate blends through triacetin-mediated interchange reactions in the melt. Polymer. 2014; 55: 4498–4513. doi: 10.1016/j.polymer.2014.06.070.
28.
LinL, DengC, WangY-z.Improving the impact property and heat-resistance of PLA/PC blends through coupling molecular chains at the interface. Polym Adv Technol. 2015; 26: 1247–1258. doi: 10.1002/pat.3560.
29.
JiangY, LoosK.Enzymatic synthesis of biobased polyesters and polyamides. Polymers. 2016; 8: 243. doi: 10.3390/polym8070243
30.
ColeH, BrockGE.Self-adjustment of internal radiation field to compensate for linearly varying spacing in X-ray diffraction. Phys Rev. 1959; 116: 868–873. doi: 10.1103/PhysRev.116.868.
31.
ShuhuaW, QiaoliX, FenL, Preparation and properties of cellulose-based carbon microsphere/poly(lactic acid) composites. J Compos Mater. 2014; 48: 1297–1302. doi: 10.1177/0021998313485263.
32.
SongJ, ZhangH.Influence of pearlescent pigments on mechanical properties and crystallization behavior of polylactic acid. Iran Polym J. 2018; 27: 105–114. doi: 10.1007/s13726-017-0591-4.
33.
TopkanloHA, AhmadiZ, TaromiFA.An in-depth study on crystallization kinetics of PET/PLA blends. Iran Polym J. 2018; 27: 13–22. doi: 10.1007/s13726-017-0582-5.
34.
Khajehpour-TadavaniS, NejabatG-R and MortazaviM-M.Crystallinity changes of HDPE films containing different amounts of an oxo-biodegradable additive due to UVC exposure. Polyolefins J. 2019. doi: 10.22063/poj.2019.2468.1135.
WeeksJJ.Melting temperature and change of Lamellar thickness with time for bulk polyethylene. J Res Natl Bur Stand A Phys Chem. 1963; 67A: 441–451. doi: 10.6028/jres.067A.046.
37.
BahramzadehA, TryAC.Molecular modification of slightly cross-linked HDPE: comparison of electron beam irradiation and peroxide treatments. Polym Adv Technol. 2016; 27: 1422–1429. doi: 10.1002/pat.3810.
38.
HassanF, EntezamM.Electron beam irradiation method to change polypropylene application: rheology and thermomechanical properties. Polyolefins J. 2019; 6: 53–61. doi: 10.22063/poj.2018.2257.1118.
