Novel natural fibre composites of nylon-6 reinforced with coconut shell (CS) particles and empty fruit bunch (EFB) fibres have been investigated. Fillers were alkali treated before melt compounding with nylon-6. Mechanical, thermal and rheological properties of composites were measured. Tensile modulus was found to improve with both fillers up to 16% for nylon-6/CS composite and 10% for nylon-6/EFB composite, whereas a moderate increase in tensile strength was observed only with CS composites. Differences in the strengthening mechanisms were explained by the morphology of the two fillers, empty fruit bunch fibres having a weaker cellular internal structure. Observation of composite morphology using SEM showed that both fillers were highly compatible with nylon-6 due to its hydrophilic nature. Both fillers were found to cause a slight drop in crystallinity of the nylon matrix and to lower melt viscosity at typical injection moulding strain rates. Moisture absorption increased with addition of both fillers.
SavetlanaS, Akhyar IbrahimG.The Effect of Graphite and NBR on the Hardness of Fly-Ash/Phenolic Composite for Brake Lining Application. Materials Science Forum. 2015;827:371–374. http://dx.doi.org/10.4028/www.scientific.net/MSF.827
AgusT, IgnWP, AlamSH, Application of oil palm empty fruit bunch fiber to improve the physical and mechanical propertieos of composite railway brake block materials. Adv Mater Res. 2013;651:486–491.
4.
PilL, BensadounF, ParisetJ, Why are designers fascinated by flax and hemp fibre composites. Compos Part A. 2016;83:193–205.
ChandrasekarM, IshakMR, SapuanSM, A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption. Plast Rubber Compos. 2017;46:119–136.
7.
SantosPA, SpinaceMAS, FermoselliKKG, Polyamide-6/vegetal fiber composite prepared by extrusion and injection molding. Composite Part A. 2007;38:2404–2411.
8.
AjjimaN, TaweechaiA.Influence of pineapple leaf ribre and it's surface treatment on molecular orientation in, and mechanical properties of, injection molded nylon composites. Polym Test. 2016;52:141–149.
LiZ, ShiT, TanD.Preparation and mechanical properties of polyamide-6 composites reinforced with Fir flour/SiO2 hybrid material. Polym Plast Technol Eng. 2012;51:926–931.
11.
MohsinA, IbrahimAN, ArsadA, Effect of polypropylene, ethylene vinyl acetate and polyamide-6 on properties of recycled polypropylene/empty fruit bunch composites. Fibres Polym. 2015;16:2359–2367.
12.
McHenryE, StachurskiZH.Composite materials based on wood and nylon fibre. Compos Part A. 2003;34:171–181.
13.
EwulonuCM, IgweIO.Properties of Oil palmempty fruit bunch fibre filled high density polyethylene. Int J Eng Technol. 2011;6:458–471
14.
HassanA, SalemaAA, AniFN, A review on oil palm empty fruit bunch fiber-reinforced polymer composite materials. Polym Compos. 2010;31:2079–2101.
15.
LiDuxin, ChenQian, YangYisha.Effects of flake graphite on property optimisation in thermal conductive composites based on polyamide 66. Plastics, Rubber and Composites. 2017;46(6):266–276. http://dx.doi.org/10.1080/14658011.2017.1327506
16.
LiuH, WuQ, ZhangQ.Preparation and properties of banana fibre-reinfoced composite based on high density polyethylene (HDPE)/nylon-6 blends. Bioresour Technol. 2009;100:6088–6097.
17.
KiziltasEE, YangHS, KiziltasA, Thermal analysis of polyamide 6 composites filled by natural fiber blend. Bioresources. 2016;11:4758–4769.
18.
MoigneNL, OeverVD, BudtovaT.Dynamic and capillary shear rheology of natural fiber-reinforced composites. Polym Eng Sci. 2013;53:2582–2593.
19.
GunawanEG, HommaH, BrodjonegoroSS, Mechanical properties of oil palm empty fruit bunch fibre. JSolid Mech Mater Eng. 2009;3:943–951.
20.
Shao-YunF, Xi-QiaoF, BerndL, Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Compos Part B. 2008;39:933–961.
21.
PanyasartK, ChaiyutaN, AmornsakchaibT, Effect of surface treatment on the properties of pineapple leaf fibers reinforced polyamide 6 composites. Energy Procedia. 2014;56:406–413.
22.
FornesTD, PaulDR.Crystallization behavior of nylon 6 nanocomposites. Polymer (Guildf). 2003;44:3945–3961.
MihaelaP, DanD, CristianaB, Polymer composites with cellulose microfibrils. Polym Eng Sci. 2007;47:1228–1234.
25.
FernandesFC, GadioliR, YassitepeE, Polyamide-6 composites reinforced with cellulose fibers and fabricated by extrusion: effect of fiber bleaching on mechanical properties and stability. Polym Compos. 2015;38:1–10.
26.
FernandesFelipe Cicaroni, GadioliRenan, YassitepeEmre.Polyamide-6 composites reinforced with cellulose fibers and fabricated by extrusion: Effect of fiber bleaching on mechanical properties and stability. Polymer Composites. 2017;38(2):299–308. http://dx.doi.org/10.1002/pc.v38.2
27.
AymanBM, AlbertM, MohamedNB, Melt rheology of nanocomposites based on acrylic copolymer and cellulose whiskers. Compos Sci Technol. 2011;71:818–827.
28.
MarcovichNE, VillarMA.Thermal and mechanical characterization of linear low-density polyethylene/wood flour composites. J Appl Polym Sci. 2003;90:2775–2784.
AlvarezVA, TerenzA, KennyJM, Melt rheological behavior of starch-based matrix composites reinforced with short sisal fibres. Polym Eng Sci. 2004;44:1907–1914.
33.
AndrzejKB, AdamJ, DietrichS.Mechanical properties of PLA composites with man-made cellulose and abaca. Compos Part A. 2009;40:404–412.
34.
LiangS, YijianL, QiangguoD, Preparation and rheology of polyamide-6/attapulgite nanocomposite and studies on their percolated structure. Polymer (Guildf). 2005;46:5758–5766.
