As a rising membrane separation technology, pervaporation (PV) has been regarded as one of the most promising separation technology applied in separation of azeotropic mixtures due to its high selectivity and low energy consumption. In a PV process, separation process mainly occurs in the PV membrane, so it is of significance to develop a membrane with high performance. Room temperature vulcanised (RTV) silicone rubber is a kind of membrane material possessing good hydrophobicity and low glass transition temperature. It is widely used in the recovery of organic compounds from their dilute aqueous solutions. In this paper, RTV silicone rubber membranes were fabricated by a typical one-pot method and characterised by Fourier transform infrared spectroscopy, thermal gravimetric analysis, water contacting angle, differential scanning calorimetry, scanning electron microscopy and swelling experiment. The membranes were used in PV recovery of n-butanol from its dilute aqueous solution (about 1 wt-%). The influences of temperature and cross-linkers on the performance of PV were discussed at the same time. In conclusion, RTV silicone rubber membrane cross-linked by vinyltrimethoxysilane (WD-21), which obtained membrane selectivity of 82.9 with butanol permeability of 1.1×106 Barrer at 50°C, got the best performance.
MagaladVT, GokaviGS, RajuKVSN, Mixed matrix blend membranes of poly(vinyl alcohol)–poly(vinyl pyrrolidone) loaded with phosphomolybdic acid used in pervaporation dehydration of ethanol. J Membr Sci. 2010;354:150–161. doi: 10.1016/j.memsci.2010.02.055
5.
AdoorSG, ManjeshwarLS, Kumar NaiduBV, Poly(vinyl alcohol)/poly(methyl methacrylate) blend membranes for pervaporation separation of water + isopropanol and water + 1,4-dioxane mixtures. J Membr Sci. 2006;280:594–602. doi: 10.1016/j.memsci.2006.02.017
6.
AdoorSG, RajineekanthV, NadagoudaMN, Exploration of nanocomposite membranes composed of phosphotungstic acid in sodium alginate for separation of aqueous–organic mixtures by pervaporation. Sep Purif Technol. 2013;113:64–74. doi: 10.1016/j.seppur.2013.03.051
7.
BaiY, DongL, LinJ, High performance polydimethylsiloxane pervaporative membranes with hyperbranched polysiloxane as a crosslinker for separation of n-butanol from water. RSC Adv. 2015;5:52759–52768. doi: 10.1039/C5RA06886J
8.
LiSY, SrivastavaR, ParnasRS.Separation of 1-butanol by pervaporation using a novel tri-layer PDMS composite membrane. J Membr Sci. 2010;363:287–294. doi: 10.1016/j.memsci.2010.07.042
9.
ChenD, HuX, ZhangH, Preparation and properties of novel polydimethylsiloxane composites using polyvinylsilsesquioxanes as reinforcing agent. Polym Degrad Stab. 2015;111:124–130. doi: 10.1016/j.polymdegradstab.2014.10.026
10.
ChenD, ChenF, HuX, Thermal stability mechanical and optical properties of novel addition cured PDMS composites with nano-silica sol and MQ silicone resin. Compos Sci Technol. 2015;117:307–314. doi: 10.1016/j.compscitech.2015.07.003
11.
ZhangY, MaoY, ChenD, Synthesis and characterization of addition-type silicone rubbers (ASR) using a novel cross linking agent PH prepared by vinyl-POSS and PMHS. Polym Degrad Stab. 2013;98:916–925. doi: 10.1016/j.polymdegradstab.2013.01.009
12.
ChenD, YiS, FangP, Synthesis and characterization of novel room temperature vulcanized (RTV) silicone rubbers using octa[(trimethoxysilyl)ethyl]-POSS as cross-linker. React Funct Polym. 2011;71:502–511. doi: 10.1016/j.reactfunctpolym.2010.12.010
13.
ChenD, YiS, WuW, Synthesis and characterization of novel room temperature vulcanized (RTV) silicone rubbers using Vinyl-POSS derivatives as cross linking agents. Polymer. 2010;51:3867–3878. doi: 10.1016/j.polymer.2010.06.028
14.
ZhuangXJ, ChenXR, SuY, Improved performance of PDMS/silicalite-1 pervaporation membranes via designing new silicalite-1 particles. J Membr Sci. 2015;493:37–45. doi: 10.1016/j.memsci.2015.06.043
15.
IkegamiT, NegishiH, SakakiK.Selective separation of n-butanol from aqueous solutions by pervaporation using silicone rubber-coated silicalite membranes. J Chem Technol Biotechnol. 2011;86:845–851. doi: 10.1002/jctb.2598
16.
SuhasDP, AminabhaviTM, RaghuAV.Mixed matrix membranes of H-ZSM5-loaded poly(vinyl alcohol) used in pervaporation dehydration of alcohols:influence of silica/alumina ratio. Polym Eng Sci. 2014;54:9.
RezakazemiM, ShahidiK, MohammadiT.Synthetic PDMS composite membranes for pervaporation dehydration of ethanol. Desalination Water Treat. 2015;54:1542–1549.
20.
RamaiahKP, SatyasriD, SridharS, Removal of hazardous chlorinated VOCs from aqueous solutions using novel ZSM-5 loaded PDMS/PVDF composite membrane consisting of three hydrophobic layers. J Hazard Mater. 2013;261:362–371. doi: 10.1016/j.jhazmat.2013.07.048
21.
KansaraAM, AswalVK, SinghPS.Preparation and characterization of new poly(dimethylsiloxane) membrane series via a ‘cross-linking’ reaction using monomolecular trichloro(alkyl)silane of different alkyl chain and type. RSC Adv. 2015;5:51608–51620. doi: 10.1039/C5RA06433C
22.
FengJ, ZhangQ, TuZ, Degradation of silicone rubbers with different hardness in various aqueous solutions. Polym Degrad Stab. 2014;109:122–128. doi: 10.1016/j.polymdegradstab.2014.07.011
23.
NithyanandanK, ZhangJX, LiYQ, Improved SI engine efficiency using acetone-butanol-ethanol (ABE). Fuel. 2016;174:333–343. doi: 10.1016/j.fuel.2016.01.001
24.
MingjieH, ShuzhenT, WeiF, Vinyl-modified hyperbranched polyether cross-linked hydroxyl-terminated polybutadiene-based polyurethane membrane for pervaporation recovery of butanol. High Perform Polym. 2015;27:381–391. doi: 10.1177/0954008314553040
25.
BakerRW, WijmansJG, HuangY.Permeability permeance and selectivity: a preferred way of reporting pervaporation performance data. J Membr Sci. 2010;348:346–352. doi: 10.1016/j.memsci.2009.11.022
WangJC, ChenYH, JinQQ.Preparation and characteristics of a novel silicone rubber nanocomposite based on organophilic montmorillonite. High Perform Polym. 2006;18:325–340. doi: 10.1177/0954008306061768
