In this study, in order to improve the thermal conductivity of polyamide 66(PA66), PA66 composites filled with flake graphite (FG) were prepared by twin-screw extruder. Effects of filler content, particle size and particle size mixing on thermal conductivity, mechanical and rheological properties of the composites were investigated. The results showed that as FG content increased from 0 to 50 wt-%, thermal conductivity of the composites filled with 100 μm FG gradually increased, whereas mechanical properties and rheological properties decreased. At 50 wt-% loading, thermal conductivity reached 3.07 W/(m K). With the increase of particle size, thermal conductivity and rheological properties of the composites improved, but mechanical properties increased first and then decreased. The composite filled with 100 μm FG had relatively optimal mechanical properties. Particle size mixing can improve thermal conductivity and the maximum value was achieved in the 1:2 mass ratio of 20 and 100 μm particles.
NgoIL, JeonS, ChanB.Thermal conductivity of transparent and flexible polymers containing fillers: a literature review. Int J Heat Mass Transf.2016;98:219–226. doi: 10.1016/j.ijheatmasstransfer.2016.02.082
2.
Ordonez-MirandaJ, Alvarado-GilJJ.Thermal conductivity of nanocomposites with high volume fractions of particles. Compos Sci Technol.2012;72(7):853–857. doi: 10.1016/j.compscitech.2012.02.016
3.
BurgerN, LaachachiA, FerriolM, Review of thermal conductivity in composites: mechanisms, parameters and theory. Prog Polym Sci.2016;61:1–28. doi: 10.1016/j.progpolymsci.2016.05.001
4.
ZhouW.Effect of coupling agents on the thermal conductivity of aluminum particle/epoxy resin composites. J Mater Sci.2011;46(11):3883–3889. doi: 10.1007/s10853-011-5309-y
5.
MamunyaYP, DavydenkoVV, PissisP, Electrical and thermal conductivity of polymers filled with metal powders. Eur Polym J.2002;38(9):1887–1897. doi: 10.1016/S0014-3057(02)00064-2
6.
KrupaI, BoudenneA, IbosL.Thermophysical properties of polyethylene filled with metal coated polyamide particles. Eur Polym J.2007;43(43):2443–2452. doi: 10.1016/j.eurpolymj.2007.03.032
7.
GaoBZ, XuJZ, PengJJ, Experimental and theoretical studies of effective thermal conductivity of composites made of silicone rubber and Al2O3 particles. Thermochim Acta.2015;614:1–8. doi: 10.1016/j.tca.2015.06.005
8.
YaoY, ZengX, GuoK, The effect of interfacial state on the thermal conductivity of functionalized Al2O3 filled glass fibers reinforced polymer composites. Compos Part A Appl Sci Manufact.2015;69:49–55. doi: 10.1016/j.compositesa.2014.10.027
9.
LiM, WanY, GaoZ, Preparation and properties of polyamide 6 thermal conductive composites reinforced with fibers. Mater Des. 2013;51(5):257–261. doi: 10.1016/j.matdes.2013.03.076
10.
MachrafiH, LebonG, IorioCS.Effect of volume-fraction dependent agglomeration of nanoparticles on the thermal conductivity of nanocomposites: applications to epoxy resins, filled by SiO2, AlN and MgO nanoparticles. Compos Sci Technol.2016;130:78–87. doi: 10.1016/j.compscitech.2016.05.003
11.
ZhouW.Thermal and dielectric properties of the AlN particles reinforced linear low-density polyethylene composites. Thermochim Acta.2011;512(1–2):183–188. doi: 10.1016/j.tca.2010.10.003
12.
PengW, HuangX, YuJ, Electrical and thermophysical properties of epoxy/aluminum nitride nanocomposites: effects of nanoparticle surface modification. Compos Part A Appl Sci Manufact.2010;41(9):1201–1209. doi: 10.1016/j.compositesa.2010.05.002
13.
PandaP, MishraG, MantryS, A study on mechanical, thermal, and electrical properties of glass fiber-reinforced epoxy hybrid composites filled with plasma-synthesized AlN. J Compos Mater.2014;48(25):3073–3082. doi: 10.1177/0021998313506242
14.
ZhouW, QiS, AnQ, Thermal conductivity of boron nitride reinforced polyethylene composites. Mater Res Bull.2007;42(10):1863–1873. doi: 10.1016/j.materresbull.2006.11.047
15.
LiS, YangT, ZouH, Enhancement in thermal conductivity and mechanical properties via large-scale fabrication of boron nitride nanosheets. High Perform Polym. 2017;29:315–327. doi: 10.1177/0954008316643766
16.
JungJ, KimJ, UhmYR, Preparations and thermal properties of micro- and nano-BN dispersed HDPE composites. Thermochim Acta. 2010;499(499):8–14. doi: 10.1016/j.tca.2009.10.013
RenPG, SiXH, SunZF, Synergistic effect of BN and MWCNT hybrid fillers on thermal conductivity and thermal stability of ultra-high-molecular-weight polyethylene composites with a segregated structure. J Polym Res.2016;23(2):1–11. doi: 10.1007/s10965-015-0908-y
20.
WangZ, QiR, WangJ, Thermal conductivity improvement of epoxy composite filled with expanded graphite. Ceram Int.2015;41(10):13541–13546. doi: 10.1016/j.ceramint.2015.07.148
21.
HuangJ, ZhuY, XuL, Massive enhancement in the thermal conductivity of polymer composites by trapping graphene at the interface of a polymer blend. Compos Sci Technol.2016;129:160–165. doi: 10.1016/j.compscitech.2016.04.029
22.
DaiJ, PengC, WangF, Effects of functionalized graphene nanoplatelets on the morphology and properties of phenolic resins. High Perform Polym. 2016;28(5):1–7.
23.
DingP, SuS, SongN, Highly thermal conductive composites with polyamide-6 covalently-grafted graphene by an in situ polymerization and thermal reduction process. Carbon.2014;66(3):576–584. doi: 10.1016/j.carbon.2013.09.041
24.
WangC, LanY, LiX, Improving the mechanical, electrical, and thermal properties of polyimide by incorporating functionalized graphene oxide. High Perform Polym.2016;40(7):121–129.
25.
ZhangWB, ZhangZX, YangJH, Largely enhanced thermal conductivity of poly(vinylidene fluoride)/carbon nanotube composites achieved by adding graphene oxide. Carbon.2015;90:242–254. doi: 10.1016/j.carbon.2015.04.040
26.
YuGC, WuLZ, FengLJ.Enhancing the thermal conductivity of carbon fiber reinforced polymer composite laminates by coating highly oriented graphite films. Mater Des.2015;88:1063–1070. doi: 10.1016/j.matdes.2015.09.096
JiaYC.Synergistically improved thermal conductivity of polyamide-6 with low melting temperature metal and graphite. Express Polym Lett. 2016;10(8):679–692. doi: 10.3144/expresspolymlett.2016.61
30.
YooY, LeeHL, HaSM, Effect of graphite and carbon fiber contents on the morphology and properties of thermally conductive composites based on polyamide 6. Polym Int.2014;63(1):151–157. doi: 10.1002/pi.4534
31.
KirályA, RonkayF.Effect of processing technology on the morphological, mechanical and electrical properties of conductive polymer composites. J Polym Eng.2013;33(8):691–699. doi: 10.1515/polyeng-2013-0038
32.
PodymovaNB, KarabutovAA.Combined effects of reinforcement fraction and porosity on ultrasonic velocity in SiC particulate aluminum alloy matrix composites. Compos Part B Eng.2017;113:138–143. doi: 10.1016/j.compositesb.2017.01.017
33.
LiS, QiS, LiuN, Study on thermal conductive BN/novolac resin composites. Thermochim Acta.2011;523(1–2):111–115. doi: 10.1016/j.tca.2011.05.010
34.
AgariY, UedaA, NagaiS.Thermal conductivities of composites in several types of dispersion systems. J Appl Polym Sci.1991;42(6):1665–1669. doi: 10.1002/app.1991.070420621
35.
RussellHW.Principles of heat flow in porous insulators. J Am Ceram Soc.1935;18(1–12):1–5. doi: 10.1111/j.1151-2916.1935.tb19340.x
36.
ZadhoushA, AlsharifMA, Moghareh-AbedMR, Temperature dependent rheological behaviour of plastisols used in coated fabrics. Iran Polym J.2007;16(11):753–758.
