A monitoring technique for detecting changes in the root gap of butt joints during the flux-cored arc welding (FCAW) was proposed. FCAW experiments were conducted for both increasing and decreasing root gap conditions, and current and voltage were measured during the root-pass welding. The measured time series signals were used as input data for training Random Convolution Kernel Transform (ROCKET) algorithm, which consists of a feature extractor with multiple random kernels, and a linear classifier. A univariate model using current and voltage, respectively, and a multivariate model using both were compared, and the multivariate model showed the highest classification accuracy of 96.2%. Moreover, the classification errors were investigated by correlating the geometry of the root bead with the measured signals.
PalS, PalSK, SamantarayAK.Prediction of the quality of pulsed metal inert gas welding using statistical parameters of arc signals in artificial neural network. Int J Comput Integr Manuf. 2010;23(5):453–465.
2.
LiY, LiYF, WangQL, . Measurement and defect detection of the weld bead based on online vision inspection. IEEE Trans Instrum Meas. 2009;59(7):1841–1849.
3.
KimJ-y, ParkJ, JangJ, . Control of droplet transfer using a filler-wire in tandem arc welding. Sci Technol Weld Joining. 2021;26(2):123–129.
4.
LeeDY, LeifssonL, KimJ-Y, . Optimisation of hybrid tandem metal active gas welding using Gaussian process regression. Sci Technol Weld Joining. 2020;25(3):208–217.
5.
KimJY, LeeDY, LeeJ, . Parameter optimization of hybrid-tandem gas metal arc welding using analysis of variance-based Gaussian process regression. Metals. 2021;11(7):1087.
6.
XuY, LvN, FangG, . Welding seam tracking in robotic gas metal arc welding. J Mater Process Technol. 2017;248:18–30.
7.
ChengY, YuR, ZhouQ, . Real-time sensing of gas metal arc welding process–a literature review and analysis. J Manuf Process. 2021;70:452–469.
8.
ÖbergAE, SikströmF.Barriers for industrial implementation of in-process monitoring of weld penetration for quality control. Int J Adv Manuf Technol. 2017;91(5):2427–2434.
9.
BjörkT, SamuelssonJ, MarquisG.The need for a weld quality system for fatigue loaded structures. Weld World. 2008;52(1):34–46.
10.
ZhangZ, WenG, ChenS.Weld image deep learning-based on-line defects detection using convolutional neural networks for Al alloy in robotic arc welding. J Manuf Process. 2019;45:208–216.
11.
NomuraK, FukushimaK, MatsumuraT, . Burn-through prediction and weld depth estimation by deep learning model monitoring the molten pool in gas metal arc welding with gap fluctuation. J Manuf Process. 2021;61:590–600.
12.
ZouY, ChenT, ChenX, . Robotic seam tracking system combining convolution filter and deep reinforcement learning. Mech Syst Signal Process. 2022;165:108372.
13.
WuD, HuM, HuangY, . In situ monitoring and penetration prediction of plasma arc welding based on welder intelligence-enhanced deep random forest fusion. J Manuf Process. 2021;66:153–165.
14.
ChengY, WangQ, JiaoW, . Detecting dynamic development of weld pool using machine learning from innovative composite images for adaptive welding. J Manuf Process. 2020;56:908–915.
15.
ShinS, JinC, YuJ, . Real-time detection of weld defects for automated welding process base on deep neural network. Metals. 2020;10(3):389.
16.
LeeSH, MazumderJ, ParkJ, . Ranked feature-based laser material processing monitoring and defect diagnosis using k-NN and SVM. J Manuf Process. 2020;55:307–316.
17.
WuC, PolteT, RehfeldtD.Gas metal arc welding process monitoring and quality evaluation using neural networks. Sci Technol Weld Joining. 2000;5(5):324–328.
18.
HuangY, YangD, WangK, . A quality diagnosis method of GMAW based on improved empirical mode decomposition and extreme learning machine. J Manuf Process. 2020;54:120–128.
19.
ZhangZ, WenG, ChenS.Audible sound-based intelligent evaluation for aluminum alloy in robotic pulsed GTAW: mechanism, feature selection, and defect detection. IEEE Trans Industr Inform. 2018;14(7):2973–2983.
20.
HeK, LiXJIA.Time–frequency feature extraction of acoustic emission signals in aluminum alloy MIG welding process based on SST and PCA. IEEE Access. 2019;7:113988–113998.
21.
CuiY, ShiY, HongX.Analysis of the frequency features of arc voltage and its application to the recognition of welding penetration in K-TIG welding. J Manuf Process. 2019;46:225–233.
22.
RuizAP, FlynnM, LargeJ, . The great multivariate time series classification bake off: a review and experimental evaluation of recent algorithmic advances. Data Min Knowl Discov. 2021;35(2):401–449.
23.
ZhuP, RadosM, SimpsonS.Theoretical predictions of the start-up phase in GMA welding. Weld J. 1997;76(7):269s.
24.
HackelingG.Mastering machine learning with scikit-learn. New York: Packt Publishing Ltd; 2017.
25.
DekkingFM, KraaikampC, LopuhaäHP, . A modern introduction to probability and statistics: understanding why and how. Vol. 488. London: Springer; 2005.
26.
DempsterA, PetitjeanF, WebbGIJDM, . ROCKET: exceptionally fast and accurate time series classification using random convolutional kernels. Data Min Knowl Discov. 2020;34(5):1454–1495.
27.
ZhouL, ZhangT, ZhangZ, . Monitoring of resistance spot welding expulsion based on machine learning. Sci Technol Weld Joining. 2022;27(4):292–300.
