Selective laser melting involves manufacturing of a part layer-by-layer by localised melting and solidification of metal powders. The geometry, composition, structure and property of the solidified deposit are significantly influenced by repeated exposure to the laser beam at a high scanning speed. A computationally efficient heat transfer model of selective laser melting is reported here using the finite element method with adaptive remeshing. The model has incorporated a very fine mesh, moving with the laser beam, to capture the local thermal gradient in and around the melt pool. A gradually varying coarser mesh is used away from the melt pool. The computed results are verified with that calculated using a uniform fine mesh and against reported experimental observations.
DebRoyT, WeiHL, ZubackJS, Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci. 2018; 92:112–224. doi: 10.1016/j.pmatsci.2017.10.001
2.
SamesWJ, ListFA, PannalaS, The metallurgy and processing science of metal additive manufacturing. Int Mater Rev. 2016; 61(5):315–360. doi: 10.1080/09506608.2015.1116649
3.
MarklM, KörnerC.Multiscale modeling of powder bed-based additive manufacturing. Annu Rev Mater Res. 2016; 46:93–123. doi: 10.1146/annurev-matsci-070115-032158
4.
GusarovAV, SmurovI.Modeling the interaction of laser radiation with powder bed at selective laser melting. Phys Proc. 2010; 5(B):381–394. doi: 10.1016/j.phpro.2010.08.065
5.
LeeYS, ZhangW.Modeling of heat transfer, fluid flow and solidification micro-structure of nickel-base superalloy fabricated by laser powder bed fusion. Addit Manufact. 2016; 12(B):178–188. doi: 10.1016/j.addma.2016.05.003
6.
KörnerC, AttarE, HeinlP.Mesoscopic simulation of selective beam melting processes. J Mater Process Technol. 2011; 211(6):978–987. doi: 10.1016/j.jmatprotec.2010.12.016
7.
KhairallahSA, AndersonA.Mesoscopic simulation model of selective laser melting of stainless steel powder. J Mater Process Technol. 2014; 214(11):2627–2636. doi: 10.1016/j.jmatprotec.2014.06.001
8.
RaghavanA, WeiHL, PalmerTA, Heat transfer and fluid flow in additive manufacturing. J Laser Appl. 2013; 25(5):052006. doi: 10.2351/1.4817788
9.
MukherjeeT, WeiHL, DeA, Heat and fluid flow in additive manufacturing – Part I: Modeling of powder bed fusion. Comput Mater Sci. 2018; 150:304–313. doi: 10.1016/j.commatsci.2018.04.022
10.
DunbarAJ, DenlingerER, GougeMF, Experimental validation of finite element modeling for laser powder bed fusion deformation. Addit Manuf. 2016; 12(A):108–120. doi: 10.1016/j.addma.2016.08.003
11.
ManvatkarV, DeA, DebRoyT.Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process. Mater Sci Technol. 2015; 31(8):924–930. doi: 10.1179/1743284714Y.0000000701
12.
ManvatkarV, DeA, DebRoyT.Heat transfer and material flow during laser assisted multi-layer additive manufacturing’. J Appl Phys. 2014; 116(12):124905. doi: 10.1063/1.4896751
13.
LadaniL, RomanoJ, BrindleyW, Effective liquid conductivity for improved simulation of thermal transport in laser beam melting powder bed technology. Addit Manuf. 2017; 14:13–23. doi: 10.1016/j.addma.2016.12.004
14.
LuoZ, ZhaoY.A survey of finite element analysis of temperature and thermal stress fields in powder bed fusion additive manufacturing. Addit Manuf. 2018; 21:318–332. doi: 10.1016/j.addma.2018.03.022
15.
HuangY, YangLJ, DuXZ, Finite element analysis of thermal behavior of metal powder during selective laser melting. Int J Therm Sci. 2016; 104:146–157. doi: 10.1016/j.ijthermalsci.2016.01.007
16.
RobertsIA, WangCJ, EsterleinR, A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing. Int J Mach Tool Manuf. 2009; 49(12–13):916–923. doi: 10.1016/j.ijmachtools.2009.07.004
DenlingerER, IrwinJ, MichalerisP.Thermomechanical modeling of additive manufacturing large parts. J Manuf Sci Eng. 2014; 136(6):061007. doi: 10.1115/1.4028669
19.
JayanathS, AchuthanA.A computationally efficient finite element framework to simulate additive manufacturing processes. J Manuf Sci Eng. 2018; 140(4):041009. doi: 10.1115/1.4039092
20.
ZengK, PalD, GongHJ, Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS. Mater Sci Technol. 2015; 31(8):945–956. doi: 10.1179/1743284714Y.0000000703
21.
PatilN, PalD, StuckerB.A new finite element solver using numerical eigen modes for fast simulation of additive manufacturing processes. In Proceedings 24th Annual Int. Solid freeform Fabrication Symp. - an additive manufacturing conf.; Austin, TX, USA; August 2013; University of Texas at Austin. pp. 535–548.
22.
ManvatkarVD, GokhaleAA, ReddyGJ, Estimation of melt pool dimensions, thermal cycle, and hardness distribution in the laser engineered net shaping process of austenitic stainless steel. Metall Mater Trans A. 2011; 42(13):4080–4087. doi: 10.1007/s11661-011-0787-8
23.
ZhangY, FaghriA.Melting and resolidification of a subcooled mixed powder bed with moving Gaussian heat source. J Heat Transf. 1998; 120(4):883–891. doi: 10.1115/1.2825907
24.
WuYC, HwangWS, SanCH, Parametric study of surface morphology for selective laser melting on Ti-6Al-4 V powder bed with numerical and experimental methods. Int J Mater Form. 2018; 11:807–813. doi: 10.1007/s12289-017-1391-2
25.
RomboutsM, FroyenL, GusarovAV, Photopyroelectric measurement of thermal conductivity of metallic powders. J Appl Phys. 2005; 97(2):024905. doi: 10.1063/1.1832740
26.
KempenK, ThijsL, YasaE, Process optimization and microstructural analysis and for selective laser melting of AlSi10Mg. In Proceedings 24th annual Int. Solid freeform Fabrication Symposium; Austin, TX, USA; August 2011; University of Texas. pp. 484–495.
27.
HoshinoT, MitoK, NagashimaA, Determination of the thermal conductivity of argon and nitrogen over a wide temperature range through data evaluation and shock-tube experiments. Int J Thermophys. 1986; 7(3):647–662. doi: 10.1007/BF00502397
28.
FuG, ZhangDZ, HeAN, Finite element analysis of interaction of laser beam with material in laser metal powder bed fusion process. Materials (Basel). 2018; 11(5):765. doi: 10.3390/ma11050765
29.
TrappJ, RubenchikAM, GussG, In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing. Appl Mater Today. 2017; 9:341–349. doi: 10.1016/j.apmt.2017.08.006
30.
ThijsL, KempenK, KruthJP, Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Mater. 2013; 61:1809–1819. doi: 10.1016/j.actamat.2012.11.052
31.
MukherjeeT, WeiHL, DeA, Heat and fluid flow in additive manufacturing – Part II: powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys. Comput Mater Sci. 2018; 150:369–380. doi: 10.1016/j.commatsci.2018.04.027
32.
ForoozmehrA, BadrossamayM, ForoozmehrE, Finite element simulation of selective laser melting process considering optical penetration depth of laser in powder bed. Mater Des. 2016; 89:255–263. doi: 10.1016/j.matdes.2015.10.002
33.
DilipJJS, ZhangS, TengC, Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4 V alloy parts fabricated by selective laser melting. Prog Addit Manuf. 2017; 2:157–167. doi: 10.1007/s40964-017-0030-2
34.
LindgrenLE, HäggbladHA, McDillJMJ, Automatic remeshing for three-dimensional finite element simulation of welding’. Comput Methods Appl Mech Eng. 1997; 147:401–409. doi: 10.1016/S0045-7825(97)00025-X
35.
BrownSB, SongH.Rezoning and dynamic substructuring techniques in FEM simulations of welding processes. J Eng Ind.1993; 115(4):415–423. doi: 10.1115/1.2901784
36.
WuCS, WangHG, ZhangYM.A new heat source model for keyhole plasma arc welding in FEM analysis of the temperature profile. Weld J. 2006; 85(12):284–291.
37.
MukherjeeT, DeA.Three-dimensional heat transfer analysis of laser-arc hybrid welding process. Indian Weld J. 2014; 47(4):57–64. doi: 10.22486/iwj/2014/v47/i4/141094
38.
MillsKC.Recommended values of thermo-physical properties for selected commercial alloys. Cambridge: Woodhead Publishing; 2002.
