Third-generation advanced high strength steels are typically given a zinc coating that provides excellent resistance to corrosion. During the resistance spot welding process, the melted zinc coating enables liquid metal embrittlement (LME) that causes cracking in the weld indent. In this study, LME in TRIP 1100 and TRIP 1200 steels was suppressed by placing aluminium interlayers added between the electrode and steel contact surface. Compared to welds exhibiting LME, TRIP 1100 with aluminium interlayers showed complete strength recovery while TRIP 1200 with aluminium interlayers resulted in a recovery of strength by 90%. Aluminium interlayers suppress LME by the formation of iron aluminides that hinder liquid zinc from coming in contact with the steel substrate, thus preventing LME.
AshiriR, ShamanianM, SalimijaziHR, Supercritical area and critical nugget diameter for liquid metal embrittlement of Zn-coated twinning induced plasticity steels (Scripta Materialia (2015) 109 (6–10)). Scr Mater2016; 112:156.
5.
InaK, KoizumiH.Penetration of liquid metals into solid metals and liquid metal embrittlement. Mater Sci Eng A. 2004; 387–389(1–2 SPEC. ISS.):390–394.
6.
JosephB, BarbierF, DagouryG, Rapid penetration of liquid Bi along Cu grain boundaries. Scr Mater1998; 39(6):775–781.
7.
AshiriR, HaqueMA, JiCW, Supercritical area and critical nugget diameter for liquid metal embrittlement of Zn-coated twining induced plasticity steels. Scr Mater2015; 109:6–10.
8.
AshiriR, ShamanianM, SalimijaziHR, Liquid metal embrittlement-free welds of Zn-coated twinning induced plasticity steels. Scr Mater2016; 114:41–47.
9.
KimYG, KimIJ, KimJS, Evaluation of surface crack in resistance spot welds of Zn-coated steel. Mater Trans2014; 55(1):171–175.
10.
BarthelmieJ, SchramA, WeslingV.Liquid metal embrittlement in resistance spot welding and hot tensile tests of surface-refined TWIP steels. IOP Conf Ser Mater Sci Eng. 2016; 118(1):1–8.
11.
LiX, LawsonS, ZhouY, Novel technique for laser lap welding of zinc coated sheet steels. J Laser Appl2007; 19(4):259–264.
12.
ChoiD-Y, SharmaA, UhmS-H, Liquid metal embrittlement of resistance spot welded 1180 TRIP steel: effect of electrode force on cracking behavior. Met Mater Int2019; 25(1):219–228.
13.
American Welding Society. Test methods for evaluating the resistance spot welding behavior of automotive sheet steel materials (AWS D8.9M:2012). Amer Welding Soc. 2012:7–13
14.
BhattacharyaD.Liquid metal embrittlement during resistance spot welding of Zn-coated high-strength steels. Mater Sci Technol2018; 34(15):1809–1829.
15.
BoriwalL, SarviyaRM, MahapatraMM.Failure modes of spot welds in quasi-static tensile – shear loading of coated steel sheets. Shear l. Mater Today Proc. 2017; 4(2):3672–3677.
16.
Seyed MousaviG, McDermidJR.Selective oxidation of a C-2Mn-1.3Si (Wt Pct) advanced high-strength steel during continuous galvanizing heat treatments. Metall Mater Trans A Phys Metall Mater Sci. 2018; 49(11):5546–5560.
17.
WintjesYZE, DiGiovanniC, HeL, “Quantifying the link between crack distribution and resistance spot weld strength reduction in lme susceptible steels.” 2018.
18.
SierlingerR, GruberM.A cracking good story of liquid metal embrittlement during spot welding of advanced high strength steels. Technical report. voestalpine Stahl Gmbh; 2016.
19.
RazmpooshMH, MacwanA, BiroE, Liquid metal embrittlement in laser beam welding of Zn-coated 22MnB5 steel. Mater Des2018; 155:375–383.
20.
BéalC.“Mechanical behaviour of a new automotive high manganese TWIP steel in the presence of liquid zinc,” 2011.
21.
KlaverTPC, MadsenGKH, DrautzR.A DFT study of formation energies of Fe-Zn-Al intermetallics and solutes. Intermetallics. 2012; 31:137–144.
22.
MiaoY, HanD, XuX, Phase constitution in the interfacial region of laser penetration brazed magnesium-steel joints. Mater Charact2014; 93:87–93.
23.
SaundersN.Thermochemical database for light metal alloys. Vol. 2. Luxembourg: EC EUR18499; 1998. p. 89–94.
24.
MarderAR.The metallurgy of zinc-coated steel. Progr Mater Sci.2000; 45:191–271.
25.
CulcasiJD, SeréPR, ElsnerCI, Control of the growth of zinc-iron phases in the hot-dip galvanizing process. Surf Coatings Technol.1999; 122(1):21–23.
26.
JordanCE, MarderAR.Effect of iron oxide as an inhibition layer on iron-zinc reactions during hot-dip galvanizing. Metall Mater Trans B Process Metall Mater Process Sci.1998; 29(2):479–484.
27.
GhumanARP, GoldsteinJI.Reaction mechanisms for the coatings formed during the hot dipping of iron in 0 to 10 Pct Al-Zn baths at 450° to 700°C. Metall Trans.1971; 2(10):2903–2914.
28.
LeeH, JoMC, SohnSS, Microstructural evolution of liquid metal embrittlement in resistance-spot-welded galvanized TWinning-Induced Plasticity (TWIP) steel sheets. Mater Charact2019; 147:233–241.
29.
YangJ, XueS, WuY, Wetting behaviour of Zn–Al filler metal on a stainless steel substrate. Sci Technol Weld Join.2018; 23(1):1–6.
