This paper introduces a novel facile method, called projection friction stir spot welding, to produce a keyhole-free friction stir welds based on a pinless tool method involving using a specially designed projection on the surface of the backing anvil. The projection plays two key roles contributing to the bonding mechanism and the joint strength: (i) encouraging the material flow perpendicular to the joint interface and (ii) bending the joint interface at the edge of the projection. The process enables pathway to produce keyhole-free welds with superior mechanical performance in steel sheets compared to the other spot welding techniques.
GalitskyC, WorrellE.Energy Efficiency Improvement and Cost Saving Opportunities for the Vehicle Assembly Industry: An Energy Star Guide for Energy and Plant Managers. Lawrence Berkeley National Laboratory. 2008: 1–81.
2.
PouranvariM, MarashiSPH.Critical review of automotive steels spot welding: process, structure and properties. Sci Technol Weld Join. 2013; 18:361–403. doi: 10.1179/1362171813Y.0000000120
3.
NadanR, DebRoyT, BhadeshiaHKDH.Recent advan-ces in friction-stir welding – process, weldment structure and properties. Prog Mater Sci. 2008; 53:980–1023. doi: 10.1016/j.pmatsci.2008.05.001
ZuidemaBK.Bridging the design–manufacturing–materials data gap: material properties for optimum design and manufacturing performance in light vehicle steel-intensive body structures. JOM. 2012; 64:1039–1047. doi: 10.1007/s11837-012-0405-2
8.
ZhangH, SenkaraJ.Resistance welding: fundamentals and applications. London: Taylor & Francis, CRC Press; 2005.
de LeonM, ShinH-S.Material flow behaviours during friction stir spot welding of lightweight alloys using pin and pinless tools. Sci Technol Weld Join. 2016; 21:140–146. doi: 10.1179/1362171815Y.0000000075
11.
MironovS, MasakiK, SatoYS, Relationship between material flow and abnormal grain growth in friction-stir welds. Scr Mater. 2012; 67:983–986. doi: 10.1016/j.scriptamat.2012.09.002
12.
YangXW, FuT, LiWY.Friction stir spot welding: a review on joint macro- and microstructure, property, and process modelling. Adv Mater Sci Eng. 2014; 2014:1–11.
13.
SuP, GerlichA, NorthTH, Material flow during friction stir spot welding. Sci Technol Weld Join. 2006; 11:61–71. doi: 10.1179/174329306X77056
14.
YangQ, MironovS, SatoYS, Material flow during friction stir spot welding. Mater Sci Eng A. 2010; 527:4389–4398. doi: 10.1016/j.msea.2010.03.082
15.
TozakiY, UematsuY, TokajiK.A newly developed tool without probe for friction stir spot welding and its performance. J Mater Proc Technol. 2010; 210:844–851. doi: 10.1016/j.jmatprotec.2010.01.015
16.
SuhuddinUFH, FischerV, KostkaA, Microstructure evolution in refill friction stir spot weld of a dissimilar Al–Mg alloy to Zn-coated steel. Sci Technol Weld Join. 2017; 22:658–665. doi: 10.1080/13621718.2017.1300744
17.
ReimannM, GoebelJ, dos SantosJF.Microstructure and mechanical properties of keyhole repair welds in AA 7075-T651 using refill friction stir spot welding. Mater Des. 2017; 132:283–294. doi: 10.1016/j.matdes.2017.07.013
18.
HuangT, SatoYS, KokawaH, Microstructural evolution of DP980 steel during friction bit Joining. Metall Mater Trans A. 2009; 40:2994–3000. doi: 10.1007/s11661-009-0016-x
19.
SunYF, FujiiH, TakakiN, Microstructure and mechanical properties of mild steel joints prepared by a flat friction stir spot welding technique. Mater Des. 2012; 37:384–392. doi: 10.1016/j.matdes.2012.01.027
20.
ZhangZH, YangXQ, ZhangJL, Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy. Mater Des. 2011; 32:4461–4470. doi: 10.1016/j.matdes.2011.03.058
21.
ChenYC, GholiniaA, PrangnellPB.Interface structure and bonding in abrasion circle friction stir spot welding: a novel approach for rapid welding aluminium alloy to steel automotive sheet. Mater Chem Phys. 2012; 134:459–463. doi: 10.1016/j.matchemphys.2012.03.017
22.
CoxaCD, GibsonaBT, DeLappaDR, A method for double-sided friction stir spot welding. J Manuf Proc. 2014; 16:241–247. doi: 10.1016/j.jmapro.2013.10.006
23.
Specification for automotive weld quality resistance spot welding of steel, AWS D8:1M. New York: American National Standard; 2007.
24.
Alizadeh-ShM, MarashiSPH, PouranvariM.Resistance spot welding of AISI 430 ferritic stainless steel: phase transformations and mechanical properties. Mater Des. 2014; 56:258–63. doi: 10.1016/j.matdes.2013.11.022
SunYF, ShenJM, MorisadaY, Spot friction stir welding of low carbon steel plates preheated by high frequency induction. Mater Des. 2014; 54:450–457. doi: 10.1016/j.matdes.2013.08.071
