12Cr oxide dispersion strengthened steel was successfully joined by friction stir welding (FSW), and the joints were irradiated with 3 MeV Au ions at 500°C. The morphology of grains, dislocations, sizes and distributions of nano-sized oxide particles (NPs) in different zones of the FSW joints were analysed. It was found severe plastic deformation occurred and fine equixed grains were formed in stir zone (SZ). The NPs coarsen obviously in thermal-mechanically affected zone (TMAZ) on advancing side (AS) due to the relative movements of plastic materials with high-velocity gradient. The size distributions of the NPs in base metal (BM), heat affected zone (HAZ) and RS-TMAZ are concentrated in a smaller range than those in SZ and AS-TMAZ. Finer grains and high density of dislocations result in hardness increasing obviously in SZ. Irradiation introduced higher hardening in HAZ because of its less grain boundaries and dislocation density compared with SZ and BM.
HayashiT, SarosiPM, SchneibelJH, Creep response and deformation processes in nanocluster-strengthened ferritic steels. Acta Mater. 2008; 56:1407–1416. doi: 10.1016/j.actamat.2007.11.038
2.
BaileyNA, StergarE, ToloczkoM, Atom probe tomography analysis of high dose MA957 at selected irradiation temperatures. J Nucl Mater. 2015; 459:225–234. doi: 10.1016/j.jnucmat.2015.01.006
3.
ChenCL, WangP, TatlockGJ.Phase transformations in yttrium aluminium oxides in friction stir welded and recrystallized PM2000 alloys. Mater High Temp. 2009; 26(3):299–303. doi: 10.3184/096034009X465211
4.
LescoatML, RibisJ, GentilsA, In situ TEM study of the stability of nano-oxides in ODS steels under ion-irradiation. J Nucl Mater. 2012; 428:176–182. doi: 10.1016/j.jnucmat.2011.12.009
BakerBW, McNelleyTR, BrewerLN.Grain size and particle dispersion effects on the tensile behavior of friction stir welded MA956 oxide dispersion strengthened steel from low to elevated temperatures. Mater Sci Eng A. 2014; 589:217–227. doi: 10.1016/j.msea.2013.09.092
7.
LindauR, KlimenkovM, JäntschU, Mechanical and microstructural characterization of electron beam welded reduced activation oxide dispersion strengthened-Eurofer steel. J Nucl Mater. 2011; 416:22–29. doi: 10.1016/j.jnucmat.2011.01.025
8.
YabuuchiK, TsudaN, KimuraA, Effects of tool rotation speed on the mechanical properties and microstructure of friction stir welded ODS steel. Mater Sci Eng A. 2014; 595:291–296. doi: 10.1016/j.msea.2013.12.022
9.
ChenCL, TatlockGJ, JonesAR.Microstructural evolution in friction stir welding of nanostructured ODS alloys. J Alloys Compd. 2010; 504:S460–S466. doi: 10.1016/j.jallcom.2010.02.192
10.
HanW, ChenD, HaY, Modifications of grain-boundary structure by friction stir welding in the joint of nano-structured oxide dispersion strengthened ferritic steel and reduced activation martensitic steel. Scr Mater. 2015; 105:2–5. doi: 10.1016/j.scriptamat.2015.04.012
WuY, CistonJ, KräemerS, The crystal structure, orientation relationships and interfaces of the nanoscale oxides in nanostructured ferritic alloys. Acta Mater. 2016; 111:108–115. doi: 10.1016/j.actamat.2016.03.031
KoilrajM, SundareswaranV, VijayanS, Friction stir welding of dissimilar aluminum alloys AA2219 to AA5083-optimization of process parameters using Taguchi technique. Mater Des. 2012; 42:1–7. doi: 10.1016/j.matdes.2012.02.016
15.
ChenCL, RichterA, KöglerR, Ion-irradiation effects on dissimilar friction stir welded joints between ODS alloy and ferritic stainless steel. J Alloys Compd. 2014; 615:S448–S453. doi: 10.1016/j.jallcom.2013.11.123
16.
CoelhoRS, KostkaA, SantosJF, EBSD technique visualization of material flow in aluminum to steel friction-stir dissimilar welding. Adv Eng Mater. 2008; 10(12):1127–1133. doi: 10.1002/adem.200800227
17.
UkaiS, OkudaT, FujiwaraM, Characterization of high temperature creep properties in recrystallized 12Cr–ODS ferritic steel claddings. J Nucl Sci Technol. 2002; 39(8):872–879. doi: 10.1080/18811248.2002.9715271
MiaoP, OdetteGR, GouldJ, The microstructure and strength properties of MA957 nanostructured ferritic alloy joints produced by friction stir and electro-spark deposition welding. J Nucl Mater. 2007; 367-370:1197–1202. doi: 10.1016/j.jnucmat.2007.03.232
LegendreF, PossonnetS, BonnaillieP, Some microstructural characterizations in a friction stir welded oxide dispersion strengthened ferritic steel alloy. J Nucl Mater. 2009; 386-388:537–539. doi: 10.1016/j.jnucmat.2008.12.170
22.
MathonMH, KlosekV, de CarlanY, Study of PM2000 microstructure evolution following FSW process. J Nucl Mater. 2009; 386-388:475–478. doi: 10.1016/j.jnucmat.2008.12.163
