The effects of layered ultrasonic impact treatment (LUIT) on the mechanical properties of thick multi-pass weld were investigated. Two 55-mm thick multi-pass welding joints were prepared, one was treated with LUIT, and the other was joined with conventional welding method. Shear-punch test and Charpy impact test were used to examine the mechanical properties of both joints. Results show that LUIT can increase the strength of weld metal (WM), resulting in more uniform shear strength distribution across the treated WM and higher impact toughness of the WM. The mechanical properties improvement of WM attributes to the oxidation of metals induced by ultrasonic impact treatment, which increases the oxygen content in the WM and causes more non-metallic oxide inclusions, and then affects the grain growth behaviour of the subsequent beads, resulting in a fine-grained microstructure and improved strength and toughness of the WM.
KimBC, LeeS, KimNJ, Microstructure and local brittle zone phenomena in high-strength low-alloy steel welds. Metall Trans A. 1991; 22(1):139–149. doi: 10.1007/BF03350956
2.
LoureiroAJR, FernandesAA.Toughness of C. G. HAZs of welds in Q & T steels. Weld J. 1994; 73(9):225–235.
3.
LoureiroA.HAZ toughness of multipass welded joints: influence of brittle zones. Key Eng Mater. 2002; 230-232:31–35.
4.
YuanT, KouS, LuoZ.Grain refining by ultrasonic stirring of the weld pool. Acta Mater. 2016; 106:144–154. doi: 10.1016/j.actamat.2016.01.016
5.
XuWH, LinSB, FanCL, Evaluation on microstructure and mechanical properties of high-strength low-alloy steel joints with oscillating arc narrow gap GMA welding. Int J Adv Manuf Technol. 2014; 75(9-12):1439–1446. doi: 10.1007/s00170-014-6225-5
6.
YuanT, LuoZ, KouS.Grain refining of magnesium welds by arc oscillation. Acta Mater. 2016; 116:166–176. doi: 10.1016/j.actamat.2016.06.036
7.
SaraevYN, GladkovskiySV, VeselovaVE, Improving the service properties of metal structures working in the conditions of low climatic temperatures by methods of adaptive pulsed-arc welding. Weld Int. 2016; 30(11):884–890. doi: 10.1080/09507116.2016.1154271
8.
WatanabeT, ShirokiM, YanagisawaA, Improvement of mechanical properties of ferritic stainless steel weld metal by ultrasonic vibration. J Mater Process Technol. 2010; 210(12):1646–1651. doi: 10.1016/j.jmatprotec.2010.05.015
9.
JoseMJ, KumarSS, SharmaA.Vibration assisted welding processes and their influence on quality of welds. Sci Technol Weld Join. 2016; 21(4):243–258. doi: 10.1179/1362171815Y.0000000088
10.
VermaJ, TaiwadeRV.Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments – a review. J Manuf Process. 2017; 25:134–152. doi: 10.1016/j.jmapro.2016.11.003
11.
ZhangL, PittnerA, MichaelT, Effect of cooling rate on microstructure and properties of microalloyed HSLA steel weld metals. Sci Technol Weld Join. 2015; 20(5):371–377. doi: 10.1179/1362171815Y.0000000026
12.
FattahiM, NabhaniN, HosseiniM, Effect of Ti-containing inclusions on the nucleation of acicular ferrite and mechanical properties of multipass weld metals. Micron. 2013; 45:107–114. doi: 10.1016/j.micron.2012.11.004
13.
BeidokhtiB, KoukabiAH, DolatiA.Effect of titanium addition on the microstructure and inclusion formation in submerged arc welded HSLA pipeline steel. J Mater Process Technol. 2009; 209(8):4027–4035. doi: 10.1016/j.jmatprotec.2008.09.021
14.
LiuS, HuangQ, LiC, Influence of non-metal inclusions on mechanical properties of CLAM steel. Fusion Eng Des. 2009; 84(7–11):1214–1218. doi: 10.1016/j.fusengdes.2008.12.037
HatamlehO.Effects of peening on mechanical properties in friction stir welded 2195 aluminum alloy joints. Mater Sci Eng A. 2008; 492(1-2):168–176. doi: 10.1016/j.msea.2008.03.017
17.
CoulesHE, ColegroveP, CozzolinoLD, High pressure rolling of low carbon steel weld seams: part 1 – effects on mechanical properties and microstructure. Sci Technol Weld Join. 2013; 18(1):76–83. doi: 10.1179/1362171812Y.0000000079
18.
AbdullahA, MalakiM, EskandariA.Strength enhancement of the welded structures by ultrasonic peening. Mater Des. 2012; 38:7–18. doi: 10.1016/j.matdes.2012.01.040
19.
GaoH, DuttaRK, HuizengaRM, Stress relaxation due to ultrasonic impact treatment on multi-pass welds. Sci Technol Weld Join. 2014; 19(6):505–513. doi: 10.1179/1362171814Y.0000000219
20.
AnX, RodopoulosCA, StatnikovES, Study of the surface nanocrystallization induced by the esonix ultrasonic impact treatment on the near-surface of 2024-T351 aluminum alloy. J Mater Eng Perform. 2006; 15(3):355–364. doi: 10.1361/105994906X108693
21.
MordyukBN, ProkopenkoGI, VasylyevMA, Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel. Mater Sci Eng A. 2007; 458(1–2):253–261. doi: 10.1016/j.msea.2006.12.049
22.
GaoW, WangD, ChengF, Enhancement of the fatigue strength of underwater wet welds by grinding and ultrasonic impact treatment. J Mater Process Technol. 2015; 223:305–312. doi: 10.1016/j.jmatprotec.2015.04.013
23.
YeY, LiX, KuangJ, Effects of electropulsing assisted ultrasonic impact treatment on welded components. Mater Sci Technol. 2015; 31(13):1583–1588. doi: 10.1179/1743284715Y.0000000078
24.
LiuC, ChenD, HillMR, Effects of ultrasonic impact treatment on weld microstructure, hardness and residual stress. Mater Sci Technol. 2017. doi: 10.1080/02670836.2017.1299277.
25.
GuduruRK, DarlingKA, KishoreR, Evaluation of mechanical properties using shear-punch testing. Mater Sci Eng A. 2005; 395(1–2):307–314. doi: 10.1016/j.msea.2004.12.048
26.
StewartGR, ElwazriAM, VaranoR, Shear punch testing of welded pipeline steel. Mater Sci Eng A. 2006; 420(1–2):115–121. doi: 10.1016/j.msea.2006.01.081
27.
ASTM. Standard test methods for notched bar impact testing of metallic materials. ASTM E23-12, 2012.
28.
ToloczkoMB, HamiltonML, LucasGE.Ductility correlations between shear punch and uniaxial tensile test data. J Nucl Mater. 2000; 283–287:987–991. doi: 10.1016/S0022-3115(00)00198-7
29.
AcharyaS, RayKK.Assessment of tensile properties of spot welds using shear punch test. Mater Sci Eng A. 2013; 565:405–413. doi: 10.1016/j.msea.2012.12.068
PetrovYN, ProkopenkoGI, MordyukBN, Influence of microstructural modifications induced by ultrasonic impact treatment on hardening and corrosion behavior of wrought Co-Cr-Mo biomedical alloy. Mater Sci Eng C. 2016; 58:1024–1035. doi: 10.1016/j.msec.2015.09.004
