Transient liquid phase bonding of AISI 304 austenitic stainless steel was carried out using a Co-based interlayer with 40 μm thickness. The effect of bonding time and solid-state homogenisation time on the microstructure and mechanical properties of samples was investigated. The results showed that isothermal solidification was completed within 30 min at a constant temperature of 1180°C. With increasing homogenisation time, at 1000°C, a more uniform distribution of alloying elements and hardness profile across the joint region was achieved. The average shear strength of homogenised samples was about 72% that of the base metal at the same heat treatment cycle.
Hdz-GarciaHM, MartinezAI, Munoz-ArroyoR, Effects of silicon nanoparticles on the transient liquid phase bonding of 304 stainless steel. J Mater Sci Technol. 2014; 30:259–262. doi: 10.1016/j.jmst.2013.11.006
3.
ZakipourS, HalvaeeA, AmadehAA, An investigation on microstructure evolution and mechanical properties during transient liquid phase bonding of stainless steel 316L to Ti-6Al-4V. J Alloys Compd. 2015; 626:269–276. doi: 10.1016/j.jallcom.2014.11.160
4.
NorouziE, AtapourM, ShamanianM. Effect of bonding time on the joint properties of transient liquid phase bonding between Ti–6Al–4V and AISI 304. J Alloys Compd. 2017; 701:335–341. doi: 10.1016/j.jallcom.2017.01.091
5.
AtabakiMM, Noor WatiJ, Bte IdrisJ. Transient liquid phase diffusion bonding of stainless steel 304. Metall Mater Eng. 2012; 18:177–186. doi: 10.1007/s12540-012-0022-1
6.
LippoldJ, KoteckiD. Welding metallurgy and weldability of stainless steels. Hoboken, NJ: Wiley; 2005.
YuanX, KimMB, KangCY. Characterization of transient-liquid-phase-bonded joints in a duplex stainless steel with a Ni-Cr-B insert alloy. Mater Charact. 2009; 60:1289–1297. doi: 10.1016/j.matchar.2009.05.012
12.
PouranvariM, EkramiA, KokabiAH. TLP bonding of cast IN718 nickel based superalloy: Process-microstructure-strength characteristics. Mater Sci Eng A. 2013; 568:76–82. doi: 10.1016/j.msea.2013.01.029
13.
KhanTI, KabirMJ, BulpettR. Effect of transient liquid-phase bonding variables on the properties of a micro-duplex stainless steel. Mater Sci Eng A. 2004; 372:290–295. doi: 10.1016/j.msea.2004.01.023
14.
PouranvariM, EkramiA, KokabiAH. Solidification and solid state phenomena during TLP bonding of IN718 superalloy using Ni-Si-B ternary filler alloy. J Alloys Compd. 2013; 563:143–149. doi: 10.1016/j.jallcom.2013.02.100
15.
BakhtiariR. Effect of configuration and composition of interlayer on TLP joints of FSX-414 superalloy. J Mater Process Technol. 2016; 231:8–17. doi: 10.1016/j.jmatprotec.2015.12.004
16.
KhazaeiBA, JahanbakhshA, BakhtiariR. TLP bonding of dissimilar FSX-414/IN-738 system with MBF-80 interlayer: The effect of homogenizing treatment on microstructure and mechanical properties. Mater Sci Eng A. 2016; 651:93–101. doi: 10.1016/j.msea.2015.10.087
17.
KhazaeiBA, AsghariG, BakhtiariR. TLP bonding of dissimilar FSX-414/IN738 system with MBF80 interlayer: Prediction of solid/liquid interface location. Trans Nonferrous Met Soc China. 2014; 24:996–1003. doi: 10.1016/S1003-6326(14)63154-X
18.
BakhtiariR, EkramiA, KhanTI. The effect of TLP bonding temperature on microstructural and mechanical property of joints made using FSX-414 superalloy. Mater Sci Eng A. 2012; 546:291–300. doi: 10.1016/j.msea.2012.03.073
19.
NorouziE, AtapourM, ShamanianM, Effect of bonding temperature on the microstructure and mechanical properties of Ti-6Al-4V to AISI 304 transient liquid phase bonded joint. Mater Des. 2016; 99:543–551.
20.
IdowuOA, RichardsNL, ChaturvediMC. Effect of bonding temperature on isothermal solidification rate during transient liquid phase bonding of Inconel 738LC superalloy. Mater Sci Eng A. 2005; 397:98–112. doi: 10.1016/j.msea.2005.01.055
21.
AlHazaaA, KhanTI, HaqI. Transient liquid phase (TLP) bonding of Al7075 to Ti-6Al-4V alloy. Mater Charact. 2010; 61:312–317. doi: 10.1016/j.matchar.2009.12.014
22.
JinYJ, KhanTI. Effect of bonding time on microstructure and mechanical properties of transient liquid phase bonded magnesium AZ31 alloy. Mater Des. 2012; 38:32–37. doi: 10.1016/j.matdes.2012.01.039
23.
KenevisiMS, Mousavi KhoieSM. An investigation on microstructure and mechanical properties of Al7075 to Ti-6Al-4V Transient Liquid Phase (TLP) bonded joint. Mater Des. 2012; 38:19–25. doi: 10.1016/j.matdes.2012.01.046
24.
LinTS, LiHX, HeP, Effect of bonding parameters on microstructures and properties during TLP bonding of Ni-based super alloy. Trans Nonferrous Met Soc China. 2012; 22:2112–2117. doi: 10.1016/S1003-6326(11)61436-2
25.
WikstromNP, OjoOA, ChaturvediMC. Influence of process parameters on microstructure of transient liquid phase bonded Inconel 738LC superalloy with Amdry DF-3 interlayer. Mater Sci Eng A. 2006; 417:299–306. doi: 10.1016/j.msea.2005.10.056
SamavatianM, HalvaeeA, AmadehAA, Transient liquid phase bonding of Al 2024 to Ti−6Al−4V alloy using Cu−Zn interlayer. Trans Nonferrous Met Soc China. 2015; 25:770–775. doi: 10.1016/S1003-6326(15)63662-7
28.
PouranvariM, EkramiA, KokabiAH. Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy. J Alloys Compd. 2009; 469:270–275. doi: 10.1016/j.jallcom.2008.01.101
29.
BakhtiariR, EkramiA. Transient liquid phase bonding of FSX-414 superalloy at the standard heat treatment condition. Mater Charact. 2012; 66:38–45. doi: 10.1016/j.matchar.2012.02.002
