The inter-critically reheated coarse-grained heat-affected zone (ICCGHAZ) of X70 pipeline steel with different second peak temperature and heat input was simulated in this study by means of Gleeble3500 simulator. The volume fraction, size, shape and distribution of martensite–austenite (M–A) constituent were analysed. The toughness of ICCGHAZ and corresponding fractographs were examined. The results showed that the distribution of M–A was strongly influenced by second peak temperature, and M–A constituent with necklace structure at lower second peak temperature led to worse toughness. The volume fraction and size of M–A were strongly affected by heat input, the volume fraction of M–A constituent increased with the increase of heat input; the volume fraction and size of M–A were key factors of toughness deterioration; the interfacial energies and the initiation of crack were related to the shape of M–A constituent.
KimB. C., LeeS., KimN. J. and LeeD. Y.: ‘Microstructure and local brittle zone in high-strength low-alloy steel welds’, Metall. Trans. A, 1991, 22, 139–149. doi: 10.1007/BF02672536
2.
LanL.Y., QiuC. L., SongH. Y. and ZhaoD. W.: ‘Correlation of martensite–austenite constituent and cleavage crack initiation in welding heat affected zone of low carbon bainitic steel’, Mater. Lett., 2014, 125, 86–88. doi: 10.1016/j.matlet.2014.03.123
3.
MoeinifarS., KokabiA. H. and HosseiniH. R. M.: ‘Effect of tandem submerged arc welding process and parameters of Gleeble simulator thermal cycles on properties of the intercritically reheated heat affected zone’, Mater. Des., 2011, 32, 869–876. doi: 10.1016/j.matdes.2010.07.005
4.
LeeS. H., KimB. C. and KwonD.: ‘Fracture toughness analysis of heat-affected zones in high-strength low-alloy steel welds’, Metall. Trans. A, 1993, 24, 1133–1141. doi: 10.1007/BF02657244
5.
BonnevieE., FerriereG., IkhlefA., KaplanD. and OrainJ. M.: ‘Morphological aspects of martensite–austenite constituents in intercritical and coarse grain heat affected zones of structural steels’, Mater. Sci. Eng. A, 2004, 385, 352–358. doi: 10.1016/S0921-5093(04)00859-7
6.
LambertA., DrilletJ., GourguesA. F., SturelT. and PineauA.: ‘Microstructure of martensite-austenite constituents in heat affected zones of high strength low alloy steel welds in relation to toughness properties’, Sci. Technol. Weld. Join., 2000, 5, 168–173. doi: 10.1179/136217100101538164
7.
LiC. W., WangY. and ChenY. H.: ‘Influence of peak temperature during in-service welding of API X70 pipeline steels on microstructure and fracture energy of the reheated coarse grain heat-affected zones’, J. Mater. Sci., 2011, 46, 6424–6431. doi: 10.1007/s10853-011-5592-7
8.
ShiY. W. and HanZ. X.: ‘Effect of weld thermal cycle on microstructure and fracture toughness of simulated heat-affected zone for a 800 MPa grade high strength low alloy steel’, J. Mater. Process. Technol., 2008, 207, 30–39. doi: 10.1016/j.jmatprotec.2007.12.049
9.
KimS., KangY. and LeeC.: ‘Variation in microstructures and mechanical properties in the coarse-grained heat-affected zone of low-alloy steel with boron content’, Mater. Sci. Eng. A, 2013, 559, 178–186. doi: 10.1016/j.msea.2012.08.072
10.
LiZ. J., XiaoN. M., LiD. Z., ZhangJ. Y., LuoY. J. and ZhangR. X.: ‘Influence of microstructure on impact toughness of G18CrMo2-6 steel during tempering’, Acta. Mater. Sin., 2014, 50, 777–786.
11.
LanL. Y., QiuC. L., ZhaoD. W., GaoX. H. and DuL. X.: ‘Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel’, Mater. Sci. Eng. A, 2011, 529, 192–200. doi: 10.1016/j.msea.2011.09.017
12.
DavisC. L. and KingJ. E.: ‘Cleavage initiation in the inter-critically reheated coarse-grained heat affected zone: Part II. Failure criteria and statistical effects’, Metall. Mater. Trans A, 1996, 27, 3019–3029. doi: 10.1007/BF02663851
13.
DavisC. L. and KingJ. E.: ‘Cleavage initiation in the inter-critically reheated coarse-grained heat affected zone: Part I. Fractographic evidence’, Metall. Mater. Trans. A, 1994, 25, 563–573. doi: 10.1007/BF02651598
14.
OhyaK., KimJ., YokoyamaK. and NagumoM.: ‘Microstructures relevant to brittle fracture initiation at the heat affected zone of weldment of a low carbon steel’, Metall. Trans. A, 1996, 27, 2574–2582. doi: 10.1007/BF02652351
15.
KouS.: ‘Welding metallurgy’, 2nd edn, 2003,New Jersey, John Wiley and Sons, Inc., 2003.
16.
DeA. K., SpeerJ. G. and MatlockD. K.: ‘Color tint-etching for multiphase steels’, Adv. Mater. Process., 2003, 161, 27–30.
17.
LiY. and BakerT. N.: ‘Effect of the morphology of the martensite-austenite phase on fracture of the weld heat affected zone in vanadium and niobium micro-alloyed steel’, Mater. Sci. Technol., 2010, 26, 1029–1040. doi: 10.1179/026708309X12512744154360
18.
LiX. D., FanY. R., MaX. P., SubramanianS. V. and ShangC. J.: ‘Influence of martensite–austenite constituents formed at different intercritical temperatures on toughness’, Mater. Des., 2015, 67, 457–463. doi: 10.1016/j.matdes.2014.10.028
19.
ZhuZ. X., KuzmikovaL., LiH. J. and BarbaroF.: ‘Effect of inter-critically reheating temperature on microstructure and properties of simulated inter-critically reheated coarse grained heat affected zone in X70 steel’, Mater. Sci. Eng. A, 2014, 605, 8–13. doi: 10.1016/j.msea.2014.03.034
20.
ZhuZ. X., KuzmikovaL., LiH. J. and BarbaroF.: ‘The effect of chemical composition on microstructure and properties of inter-critically reheated Coarse-Grained heat-affected zone in X70 steels’, Metall. Mater. Trans. B, 2014, 45, 229–235. doi: 10.1007/s11663-013-0008-5
21.
KweonK. S., KimJ. H., HongJ. H. and LeeC. H.: ‘Microstructure and toughness of inter-critically reheated heat affected zone in reactor pressure vessel steel weld’, Sci. Technol. Weld. Join., 2000, 5, 161–167. doi: 10.1179/136217100101538155
22.
YangY., ShangC. J., NieW. J. and SubramanianS.: ‘Investigation on the microstructure and toughness of coarse grained heat affected zone in X-100 multi-phase pipeline steel with high Nb content’, Mater. Sci. Eng. A, 2012, 558, 692–701. doi: 10.1016/j.msea.2012.08.077
23.
LiX. D., MaX. P., SubramanianS. V., ShangC. J. and MisraR. D. K.: ‘Influence of prior austenite grain size on martensite–austenite constituent and toughness in the heat affected zone of 700 MPa high strength line pipe steel’, Mater. Sci. Eng. A, 2014, 616, 141–147. doi: 10.1016/j.msea.2014.07.100
24.
YuL., WangH. H., HouT. P., WangX. L., WanX. L. and WuK. M.: ‘Characteristic of martensite–austenite constituents in coarse grained heat affected zone of HSLA steel with varying Al contents’, Sci. Technol. Weld. Join., 2014, 19, 708–714. doi: 10.1179/1362171814Y.0000000246
25.
YuL., WangH. H., WangX. L., HuangG., HouT. P. and WuK. M.: ‘Improvement of impact toughness of simulated heat affected zone by addition of aluminium’, Mater. Sci. Technol., 2014, 30, 1951–1958. doi: 10.1179/1743284714Y.0000000602
26.
SongH. Y., EvansG. M. and BabuS. S.: ‘Effect of microstructural heterogeneities on scatter of toughness in multi-pass weld metal of C–Mn steels’, Sci. Technol. Weld. Join., 2014, 19, 376–384. doi: 10.1179/1362171814Y.0000000194
27.
YangY., ShangC. J. and NieW. J.: ‘Investigation on the crystallography of the transformation products of reverted austenite in intercritically reheated coarse grained heat affected zone’, Mater. Des., 2013, 43, 485–491. doi: 10.1016/j.matdes.2012.07.015
28.
BhadeshiaH. K. D. H. and WaughA. R.: ‘Bainite: An atom-probe study of the incomplete reaction phenomenon’, Acta. Metall., 1982, 30, 775–784. doi: 10.1016/0001-6160(82)90075-X
