Comprehensive models of heat transfer require specification of the total amount of heat received by the workpiece. The objective of this work was to critically examine the use of a water-cooled stationary anode calorimeter to obtain both arc efficiency and total heat input into the workpiece. For simplicity and clarity, this last quantity is called the gross heat input. The effects of current, material type and water flow rate on the calorimeter performance were determined experimentally. Some measures for reducing errors in calorimetry were evaluated. Improvements were made to reduce heat losses from the top surface of the test coupon and boost heat removal from the opposite surface. A sensitivity test was conducted to estimate the effect of measurement inaccuracies. The results demonstrate the effectiveness of calorimetry for measuring gross heat input in arc welding.
NasiriM. B., BehzadinejadM., LafitiH. and MartikainenJ.: ‘Investigation on the influence of various welding parameters on the arc thermal efficiency of the GTAW process by calorimetric method’, J. Mech. Sci. Technol., 2014, 28, (8), 3255–326. doi: 10.1007/s12206-014-0736-8
2.
WongY.-R. and LingS.-F.: ‘Improved measurement of resistance and calculation of arc power in fusion welding’, Sci. Technol. Weld. Join., 2013, 18, (1), 52–56. doi: 10.1179/1362171812Y.0000000074
3.
StenbackaN.: ‘On arc efficiency in gas tungsten arc welding’, Soldag. Insp., 2013, 18, (4), 380–390. doi: 10.1590/S0104-92242013000400010
4.
LiskevychO., QuintinoL., VilarinhoL. O. and ScottiA.: ‘Intrinsic errors on cryogenic calorimetry applied to arc welding’, Weld. World, 2013, 57, (3), 349–357.
HaelsigA. and MayrP.: ‘Energy balance study of gas-shielded arc welding processes’, Weld. World, 2013, 57, (5), 727–734. doi: 10.1007/s40194-013-0073-z
7.
PépeN., EgerlandS., ColegroveP., YappD., LeonhartsbergerA. and ScottiA.: ‘Measuring the process efficiency of controlled gas metal arc welding processes’, Sci. Technol. Weld. Join., 2011, 16, (5), 412–417. doi: 10.1179/1362171810Y.0000000029
8.
LiskevychO. and ScottiA.: ‘Determination of the gross heat input in arc welding’, J. Mater. Process. Technol., 2015, 225, 139–150. doi: 10.1016/j.jmatprotec.2015.06.005
9.
ScottiA., ReisR. P. and LiskevychO.: ‘A descriptive model of the heat flux in arc welding aiming the effective heat input concept’, Soldag. Insp., 2012, 17, (2), 166–172. (in Portuguese) doi: 10.1590/S0104-92242012000200010
10.
BosworthM. R.: ‘Effective heat input in pulsed current gas metal arc welding with solid wire electrodes’, Weld. J., 1991, 70, (3), 111s–117s.
11.
VilarinhoL. O., ArevaloH. D. H. and VieiraC. A. C.: ‘Development and assessment of calorimeters using liquid nitrogen and continuous flow (water) for heat input measurement’, Proc. 9th Int. Conf. ‘Trends in Welding Research’,2012, Chicago, 1, 1–10.
12.
ArevaloH. D. H. and VilarinhoL. O.: ‘Development and assessment of calorimeters using liquid nitrogen and continuous flow (water) for heat input measurement’, Soldag. Insp., 2012, 17, (3), 236–250, (in Portuguese). doi: 10.1590/S0104-92242012000300008
13.
HaelsigA., KuschM. and MayrP.: ‘Calorimetric analyses of the comprehensive heat flow for gas metal arc welding’, Weld. World, 2015, 59, (2), 191–199. doi: 10.1007/s40194-014-0193-0
14.
ÇengelY. A.: ‘Heat transfer: a practical approach’, 2nd edn, 2003, Mc Graw Hill. p. 878(emissivity) and p. 458 (Nusselt).
15.
YamamotoK., TanakaM., TashiroS., NakataK., YamazakiK., YamamotoE., SuzukiK. and MurphyA. B.: ‘Metal vapour behaviour in thermal plasma of gas tungsten arcs during welding’, Sci. Technol. Weld. Join., 2008, 13, (6), 566–572. doi: 10.1179/174329308X319235
16.
TashiroS., TanakaM., NakataK., IwaoT., KoshiishiF., SuzukiK. and YamazakiK.: ‘Plasma properties of helium gas tungsten arc with metal vapour’, Sci. Technol. Weld. Join., 2007, 12, (3), 202–207. doi: 10.1179/174329307X164391
17.
GanvirA., CurryN., MarkocsanN., NylénP., VilemovaM. and PalaZ.: ‘Influence of microstructure on thermal properties of columnar axial suspension plasma sprayed thermal barrier coatings’, Proc. Int. Thermal Spray Conf. on ‘ASM Thermal Spray Society’,May2015, Long Beach, USA.
18.
SikströmF.: ‘Operator bias in the estimation of arc efficiency in gas tungsten arc welding’, Soldag. Insp., 2015, 20, (1), 128–133. doi: 10.1590/0104-9224/SI2001.13
19.
CantinG. M. D. and FrancisJ. A.: ‘Arc power and efficiency in gas tungsten arc welding of aluminum’, Sci. Technol. Weld. Join., 2005, 10, (2), 200–210. doi: 10.1179/174329305X37033
