Monitoring of friction stir welding process using weld image information

Abstract

Monitoring friction stir welding process based on weld images is attempted in this research. Well-known fractal theory is applied to images of the welds and extracted features in terms of fractal dimension are correlated to ultimate tensile strength (UTS) of the joints. The correlation shows a decreasing trend that can be an indicator towards monitoring of weld quality. Apart from fractal theory, wavelet transform is also applied to the acquired images and an indicator is proposed relating the information gathered after the decomposition. Interestingly, the proposed indicator also describes a decreasing trend of UTS with the increase in its value. The proposed approaches can be effectively applied in real-time monitoring of the process with appreciable accuracy.

Keywords

Fractal dimension Image analysis Box counting Katz's Monitoring Wavelet transform

Get full access to this article

View all access options for this article.

References

Thomas

W. M.

, Nicholas

E. D.

, Needhman

J. C.

, Murch

M. G.

, Temple-Smith

and Dawes

C. J.

: ‘International Patent Application PCT/GB92/02203 and GB Patent Application 9125978.8’, UK Patent Office, London, 6 December 1991.

Okuyucu

, Kurt

and Arcaklioglu

: ‘Artificial neural network application to the friction stir welding of aluminium plates’, Mater. Design, 2007, 28, 78–84. doi: 10.1016/j.matdes.2005.06.003

Boldsaikhan

, Corwin

E. M.

, Logar

A. M.

and Arbegast

W. J.

: ‘The use of neural network and discrete Fourier transform for real time evaluation of friction stir welding’, Appl. Soft Comput., 2011, 11, 4839–4846. doi: 10.1016/j.asoc.2011.06.017

Fratini

, Buffa

and Palmeri

: ‘Using a neural network for predicting the average grain size in friction stir welding processes’, Comput. Struct., 2009, 87, 1166–1174. doi: 10.1016/j.compstruc.2009.04.008

Rajakumar

and Balasubramanian

: ‘Establishing relationships between mechanical properties of aluminium alloys and optimised friction stir welding process parameters’, Mater. Design, 2012, 40, 17–35. doi: 10.1016/j.matdes.2012.02.054

Elangovan

, Balasubramanian

and Babu

: ‘Developing an empirical relationship to predict tensile strength of friction stir welded AA2219 aluminium alloy’, J. Mater. Eng. Perform., 2008, 17, (6), 820–830. doi: 10.1007/s11665-008-9240-6

Cavaliere

, Campanile

, Panella

and Squillace

: ‘Effect of welding parameters on mechanical and microstructural properties of AA6065 joints produced by friction stir welding’, J. Mater. Process. Technol., 2006, 180, 263–270. doi: 10.1016/j.jmatprotec.2006.06.015

, Wu

C. S.

, Pittner

and Rethmeier

: ‘Simultaneous measurement of tool torque, traverse force and axial force in friction stir welding’, J. Manuf. Processes, 2013, 15, (4), 495–500. doi: 10.1016/j.jmapro.2013.09.001

Chen

, Kovacevic

and Jandgric

: ‘Wavelet transform analysis of acoustic emission in monitoring friction stir welding of 6061 aluminium’, Int. J. Mach. Tools Manuf., 2003, 43, 1383–1390. doi: 10.1016/S0890-6955(03)00130-5

10.

Pend

, Fukumoto

, Brown

and Zhou

: ‘Image analysis of electrode degradation in resistance spot welding of aluminium’, Sci. Technol. Weld. Join., 2004, 9, (4), 331–336. doi: 10.1179/136217104225012256

11.

Gang

and Chi

D. Z.

: ‘Novel approach to enhancement of ultrasonic TOFD B-scan image for measurement of weld crack’, Sci. Technol. Weld. Join., 2007, 12, (1), 87–93. doi: 10.1179/174329307X159847

12.

Zhang

H. J.

, Wang

F. J.

, Gao

W. G.

and Hou

Y. Y.

: ‘Quality assessment for resistance spot welding based on binary image of electrode displacement signal and probabilistic neural network’, Sci. Technol. Weld. Join., 2014, 19, (3), 242–249. doi: 10.1179/1362171813Y.0000000187

13.

Tanaka

, Komagata

, Tsukada

and Kamiya

: ‘Fractal analysis of the influence of surface roughness of toner particles on their flow properties and adhesion behaviour’, Powder Technol., 2008, 186, 1–8. doi: 10.1016/j.powtec.2007.10.030

14.

Chappard

, Degasne

, Hure

, Legrand

, Audran

and Basle

M. F.

: ‘Image analysis measurement of roughness by texture and fractal analysis correlate with contact profilometry’, Biomaterials, 2003, 24, 1399–1407. doi: 10.1016/S0142-9612(02)00524-0

15.

Risovic

, Poljacek

S. M.

, Furic

and Gojo

: ‘Inferring fractal dimension of rough/porous surfaces- A comparison of SEM image analysis and electrochemical impedance spectroscopy methods’, Appl. Surf. Sci., 2008, 255, 3063–3070. doi: 10.1016/j.apsusc.2008.08.106

16.

Muguthu

J. N.

and Gao

: ‘Profile fractal dimension and dimensional accuracy analysis in machining metal matrix composites’, Mater. Manuf. Processes, 2013, 28, 1102–1109. doi: 10.1080/10426914.2013.823501

17.

Yong

, Qiang

and Zhenguo

: ‘Application of fractal theory in welding image processing’, J. Image Graphics, 2002, 7, (1), 86–90.

18.

Zhigang

and Hongwei

: ‘Computing method of fractal dimension of image and its application’, J. Jiangsu Sci. Technol., 2001, 22, (6), 92–95.

19.

Valavanis

and Kosmopoulos

: ‘Multiclass defect detection and classification in weld radiographic images using geometric and texture features’, Expert Syst. Appl., 2010, 37, 7606–7614. doi: 10.1016/j.eswa.2010.04.082

20.

Mandelbrot

B. B.

: ‘The fractal geometry of nature’; 1982, Freeman, San Francisco.

21.

Liebovitch

L. S.

and Toth

: ‘A fast algorithm to determine fractal dimensions by box counting’, Phys. Lett. A, 1989, 141, 386–390. doi: 10.1016/0375-9601(89)90854-2

22.

Russel

, Hanson

and Ott

: ‘Dimension of strange attractors’, Phys. Rev. Lett., 1980, 45, (14), 1175–1178. doi: 10.1103/PhysRevLett.45.1175

23.

Katz

M. J.

: ‘Fractal and the analysis of waveforms’, Comput. Biol. Med., 1988, 18, 145–156. doi: 10.1016/0010-4825(88)90041-8

24.

Petrosian

: ‘Kolmogorov complexity of finite sequences and recognition of different preictal EEG patterns’, Proc. IEEE Symp. on ‘Computer based medical systems’, 1995, 212–217.

25.

Singh

K. V.

, Hamilton

and Dymek

: ‘Developing predictive tools for friction stir weld quality assessment’, Sci. Technol. Weld. Join., 2010, 15, (2), 142–148. doi: 10.1179/136217109X12590746472571

26.

Rodrigues

D. M.

, Leitao

, Louro

, Gouveia

and Loureiro

: ‘High speed friction stir welding of aluminium alloys’, Sci. Technol. Weld. Join., 2010, 15, (8), 676–681. doi: 10.1179/136217110X12785889550181

27.

Liu

H. J.

, Fujii

, Maeda

and Nogi

: ‘Mechanical properties of friction stir welded joints of 1050-H24 aluminium alloy’, Sci. Technol. Weld. Join., 2003, 8, (6), 450–454. doi: 10.1179/136217103225005598

28.

Kh,

, Hassan

, Prangnell

P. B.

, Norman

A. F.

, Price

D. A.

and Williams

S. W.

: ‘Effect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir welds’, Sci. Technol. Weld. Join., 2003, 8, (4), 257–268. doi: 10.1179/136217103225005480

29.

Krishnan

K. N.

: ‘On the formation of onion rings in friction stir welds’, Mat. Sci. Eng. A, 2002, 327, 246–251. doi: 10.1016/S0921-5093(01)01474-5

30.

Yajnik

: ‘Novel technique of oversampling the broken images using wavelet transform’, Appl. Comput. Harmon. Anal., 2015, 39, 357–368. doi: 10.1016/j.acha.2015.01.002

31.

Liu,

, Zhang

and Yan

: ‘A novel image enhancement algorithm based on stationary wavelet transform for infrared thermography to the de-bonding defect in solid rocket motors’, Mech. Syst. Signal Process., 2015, 62–63, 366–380. doi: 10.1016/j.ymssp.2015.03.010