Sustainability is a central issue in metallurgical processes due to their energy intensiveness and environmental impacts. The role of metallurgical industry in Finland is significant accounting for 12% of the value of exports. Meanwhile it is also responsible for 7% of CO2 emissions. Sustainability has been in focus during the latest decennia. Foremost progresses in iron and steelmaking for energy saving and reduction of emissions are surveyed in this contribution. Ferroalloys smelting is a highly energy intensive process. Utilization of local low-grade chromite ore led to major technological advances including innovative agglomeration technique, closed smelting furnace with pre-heating and off-gas recovery contributing to high energy efficiency and low carbon footprint in ferrochrome production. In non-ferrous metallurgy developments in flash smelting for copper rose from a need of substantial reduction of energy consumption and SO2 emissions. The focus was then set on energy efficient technologies with low carbon footprint, sulphur fixation and fugitive emissions. Oxygen in smelting, continuous converting, direct to blister and direct nickel matte smelting are the main achievements. The impact of novel technologies to global sulphur emissions and local environmental issues in the smelters has been considerable.
AsteljokiJ, KrogerusHJ, MäkinenTM. 1989. Recent pyrometallurgical process developments at Outokumpu. TMS-AIME Annual Meeting 1989. Las Vegas, USA, Paper # A89-26, 17 p.
3.
BichowskyF, RossiniF. 1936. Thermochemistry of chemical substances. New York (NY): Reinhold Publ. Co.
DaavittilaJ, HonkaniemiM. 2003. History of outokumpu's ferroalloy technology development. MB Ferroalloy Conf.; 2003 Nov 3–5; Monte Carlo, Monaco; 13 p.
10.
DaavittilaJ, HonkaniemiM, JokinenP. 2004. The transformation of ferrochromium smelting technologies during the last decades. J SAIMM. 104:541–549.
11.
Dos SantosM. 2010. Meeting the challenge of sustainability through technology development and integration in ferroalloy submerged arc furnace plant design. In: Vartiainen A, editor. Proc. INFACON XII, Helsinki; 2010 Jun 6–9; Espoo: Outotec; p. 71–80.
12.
EU-European Commission, 2014Oct. Integrated pollution prevention and control (IPPC), Reference Document on Best Available Techniques in the Non-Ferrous Metals Industries. Available from: eippcb.jrc.ec.europa.eu/reference/BREF/NFM_Final_Draft_10_2014.pdf.
13.
FagerlundKO. 2013. Outotec smelting-integrated sustainable plant solutions. In: Bassa R, Parra R, Luraschi A, Demetrio S, editors. Proc. Copper 2013 Vol III (Book 1). Santiago (Chile): The Chilean Inst. Mining Eng, p. 21–29.
14.
FreemanH. 1930. Process of making iron oxide and sulphur dioxide from iron sulphide ores. US Pat. 2 030 627 (Appl. March. 5, 1930).
15.
GasikM, editor. 2013. Handbook of ferroalloys. Oxford: Elsevier Ltd.
16.
HabashiF. 2007. Copper metallurgy at the crossroads. J Miner Metall B. 43:1–19. doi: 10.2298/JMMB0701001H
17.
HaglundTR. 1936. Roasting process. US Pat. 2 209 331 (Appl. Sweden Nov 12, 1936).
18.
HannialaP, Mäkinen,T, KytöM. 1991. Flash technology for converting. EMC ’91 Non-ferrous metallurgy-present and future. London: Elsevier Appl. Sci., p. 191–203.
19.
HärkkiS, AaltonenO, TuominenT. 1976. High-grade matte production with oxygen enrichment by the Outokumpu flash smelting method. In: Extractive metallurgy of copper, Vol I. New York: AIME, p. 488–510.
20.
HeikkinenE-P, IkäheimonenT, MattilaO, FabritiusT. A thermodynamic study on the oxidation of silicon, carbon and chromium in the Ferrochrome converter. The Twelfth International Ferroalloys Congress – Sustainable Future; 2010 Jun 6–9; Helsinki, Finland. Proceedings, p. 229–237.
21.
HolappaL. 2010. Towards sustainability in ferroalloy production. J SAIMM. 110:703–710.
JokilaaksoA, SuominenR, TaskinenP, LiliusK. 1991. Oxidation of chalcopyrite in simulated suspension smelting. Trans IMM Sect C. 100:79–90.
24.
Jones,R.2014. DC arc furnaces-past, present, and future. In: MackeyP, GrimseyE, JonesR, BrooksG, editors. Celebrating the megascale: Proc. EPD Symp. on Pyrometallurgy. Warrendale (PA): TMS, p. 129–139.
25.
KallialaO, KaskialaM, SuorttiT, TaskinenP. 2015. Freeze lining formation on water-cooled refractory wall. Mater Process Extr Metall. 124:224–232. doi: 10.1179/1743285515Y.0000000012
26.
KelleyK. 1932–1937. Contributions to the data on theoretical metallurgy I-VI. US Bur Mines, Bulletin #350, #371, #383, #384, #393, #394 & #406.
27.
KinnunenK, SwanljungJ. Modernization of power plant at Raahe steelworks. METEC and 2nd ESTAD; 2015 June 15–19; Düsseldorf, Germany.
28.
KojoI, JokilaaksoA, HannialaP. 2000. Flash smelting and converting: a 50 year retrospect. JOM. 52:57–61. doi: 10.1007/s11837-000-0049-5
29.
KojoI, LahtinenM, NurminenE. 2009. Flash converting-sustainable technology now and in the future. In: KapustaJ, WarnerT, editors. Int. Peirce-Smith converting centennial. Warrendale (PA): TMS, p. 383–395.
30.
KojoI, StorchH. 2006. Copper production with Outokumpu flash smelting: an update. In: KongoliF, editor. Proc. Sohn Internat. Symp. Vol 8. Warrendale (PA): TMS, p. 225–238.
31.
KojoIV. 2010. Copper production alternatives. A paper presented at: Outotec Mining and Metals Processing Seminar; Sofitel Plaza, Hanoi, Vietnam, 2nd June 2010.
32.
KrogerusE, SulantoJ, TalonenT. 1984. The Outokumpu lead flash smelting process. In: Extractive metallurgy 1984. Melbourne: Aus. IMM, p. 303–308.
33.
LangeA. 1960. Das Schwebeschmelzen und andere leistungsintensive Prozesse. Z Erzberg. Metallhüttenwes. 13:151–198 & 13 (5) p. 216–223.
34.
LouhiM. 2015. Environmental aspects of ferrochrome production. A paper presented at: ICDA Members’ Meeting; 2015 April 30; Istanbul (Turkey); p. 15.
35.
MackeyP. 2014. Evolution of the large copper smelter-1800s to 2013. In: MackeyP, GrimseyE, JonesR, BrooksG, editors. Celebrating the Megascale Proc. EPD Symp. on Pyrometallurgy. Warrendale (PA): TMS, p. 17–37.
36.
MäkinenJ, JåfsG. 1982. Production of matte, white metal, and blister copper by flash furnace. JOM. 34:54–59. doi: 10.1007/BF03338029
37.
NiemeläP. 2001. CO2 emissions in production of ferrochromium. A paper presented at: 16th Int. Ferroalloys Conference; October 5; Rome (Italy), 7 p.
38.
NiemeläP, KrogerusH, OikarinenP. 2004. Formation, characteristics and utilization of CO-gas formed in ferrochromium smelting. Proceedings of INFACON X, SA IMM, Johannesburg, RSA, p. 68–77.
39.
NormanTE. 1936. Autogenous smelting of copper concentrates with oxygen-enriched air. Eng Miner J. 137:489–503 & 562–567.
Ovako Imatra internal report 2015 – Steel Mill and Environment (in Finnish).
42.
PääkkönenE, MattelmäkiM. 1996. The direct Outokumpu nickel smelting (DON) process and the Harjavalta expansion. In: GrimseyE, NeussI, editors. Nickel ‘96. Victoria: The Australas. IMM, p. 235–241.
43.
PeuraniemiE, LahtinenM. 2006. Outokumpu blister flash smelting process. In: KongoliF, ReddyRG editors. Sohn Int. Symp. Vol 8 – Int. Symp. on Sulfide Smelting. Warrendale, (PA): TMS, p. 303–312.
44.
Raahe Steel Works.2016. Private communication, August 2016.
45.
RiesbeckJ, HooeyL, KinnunenK, LiljaJ, HallinM, SandbergJ.2013. Global effects of closing down sinter plant at Ruukki Raahe integrated steelworks. ISIJ-VDEh-Jernkontoret Symposium 2013, Japan, pdf 10pp.
46.
SärkikoskiT. 1999. A flash of knowledge. Helsinki: Finnish Society for History of Technology, 303 p.
SSAB, LKAB and Vattenfall launch long-term initiative for CO2-free ironmaking for steel production. Press conference; 2016 April 4. Available from: http://www.greencarcongress.com/2016/04/ssab.html.
Van der StelJ, 2014. ULCOS top gas recycling blast furnace process. European Commission Research Fund for Coal and Steel. Final Report EUR 26414 EN, 2014, 47pp.
56.
VartiainenA, DaavittilaJ, KrogerusH. 2007. Advances in ferrous agglomeration technologies by Outotec Oyj. Admet 2007; 2007 May 27–30; Dnipropetrovsk (Ukraina), 17 p.
