Electrochemical separation of Dy from Nd magnet scraps in molten LiCl

Abstract

We proposed a new separation and recovery process for RE metals from Nd magnet scraps using molten salt electrolysis. The present study focused on the electrochemical formation of RE–Ni (RE = Dy, Nd, Pr) alloys in a molten LiCl–KCl system at 723 K. Cyclic voltammetry was conducted using a Ni electrode in molten LiCl–KCl–RECl₃ systems at 723 K. In the negative scan for the DyCl₃ added system, a large cathodic current was observed from 0.70 V (vs. Li⁺/Li) as a result of the formation of Dy–Ni alloys. In contrast, large cathodic currents as results of the formation of Nd–Ni and Pr–Ni alloys were observed from 0.60 V. On the basis of these results, an alloy sample was prepared by potentiostatic electrolysis at 0.65 V for 1 h using a Ni plate cathode in a molten LiCl–KCl–DyCl₃–NdCl₃–PrCl₃ system. The mass ratio of Dy/Nd+Pr in the alloy sample was found to be 50 by ICP-AES. Finally, a Dy permeation experiment was conducted with a new electrolytic cell.

Keywords

Molten salt electrolysis Separation Dy Nd magnet scrap Recycle

Get full access to this article

View all access options for this article.

References

Kobayashi,

, Kobayashi,

, Nohira,

, Hagiwara,

, Oishi,

and Konishi,

2011. Electrochemical formation of Nd–Ni alloys in molten LiF–CaF₂–NdF₃. Journal of the Electrochemical Society, 158, pp.E142–146. doi: 10.1149/2.072112jes

Kobayashi,

, Nohira,

, Kobayashi,

, Yasuda,

, Hagiwara,

, Oishi,

and Konishi,

2012. Electrochemical formation of Dy–Ni alloys in molten LiF–CaF₂–DyF₃. Journal of the Electrochemical Society, 159, pp.E193–197. doi: 10.1149/2.053212jes

Konishi,

, Nohira,

and Ito,

2001. Formation and phase control of Dy alloy films by electrochemical implantation and displantation. Journal of the Electrochemical Society, 148, pp.C506–511. doi: 10.1149/1.1379031

Konishi,

, Nishikiori,

, Nohira,

and Ito,

2003. Thermodynamic properties of Dy–Ni intermetallic compounds. Electrochimica Acta, 48, pp.1403–1408. doi: 10.1016/S0013-4686(03)00007-0

Konishi,

, Nohira,

and Ito,

2003. Kinetics of DyNi₂ film growth by electrochemical implantation. Electrochimica Acta, 48, pp.563–568. doi: 10.1016/S0013-4686(02)00723-5

Konishi,

, Ono,

, Nohira,

and Oishi,

2011. Selective separation of rare earth metals by molten salt electrolysis and alloy diaphragm. Molten Salts (in Japanese), 54, pp.21–28.

Konishi,

, Ono,

, Nohira,

and Oishi,

2012. Separation of Dy and Nd (La) using molten salt and an alloy diaphragm. ECS Transactions, 50, pp.463–472. doi: 10.1149/05011.0463ecst

Konishi,

, Ono,

, Nohira,

and Oishi,

2013. Electrochemical formation of RE–Cu (RE=Dy, Nd) alloys in a molten LiCl–KCl system. ECS Transactions, 53, pp.37–46. doi: 10.1149/05311.0037ecst

Matsumiya,

, Tokuraku,

, Matsuura,

and Hinoue,

2005. Enrichment of rare earth and alkaline-earth elements by countercurrent electromigration in room temperature molten salts. Electrochemistry Communications, 7, pp.370–376. doi: 10.1016/j.elecom.2005.02.012

10.

Oishi,

, Konishi,

, Nohira,

, Tanaka,

and Usui,

2010. Separation and recovery of rare earth metals by molten salt electrolysis using alloy diaphragm. Kagaku Kogaku Ronbunshu, 36, pp.299–303. doi: 10.1252/kakoronbunshu.36.299

11.

Shirayama,

and Okabe,

T. H.

2009. Current status of rare earth alloy magnet and Pyrometallurgical recycling technology (in Japanese). Molten Salts, 52, pp.71–82.

12.

Takeda,

, Nakano,

and Sato,

2009. Resource recovery from wastes of rare earth magnet by utilizing fluoride molten salts (in Japanese). Molten Salts, 52, pp.63–70.

Electrochemical separation of Dy from Nd magnet scraps in molten LiCl–KCl

Abstract

Keywords

Get full access to this article

References