The data obtained on 220-T ultra-high power electric arc furnace (EAF) were analysed in order to study the impact of DRI quality on the steelmaking process parameters and consumption of lime, coke, oxygen, natural gas, electrical energy and electrodes. In addition, the effects of charging methods and proportions of DRI in an EAF were studied. It was found that by increasing the proportion of non-high quality reduced pellets and/or HBI to 45% of the metallic charge, the steel yield decreased to 85.32% and increased to 87.57% when between 75 and 100% continuous feeding of high quality reduced pellets. This resulted in saving 21 min in tap-to-tap time and 7% of the electrode consumption. Charging high proportion of non-high quality DRI from 45% to 100% in EAF, leads to a loss of 4 tons/heat in liquid steel, and an increase in lime consumption from 4 to 6 kg/ton liquid steel.
SandbergaELennoxbBUndvallcP.Control Eng Pract. 2007;15:1063–1075.
3.
Gauffin andAPistoriusPC.The scrap collection per industry sector and the circulation times of steel in the U.S. between 1900 and 2016, calculated based on the volume correlation model. Metals (Basel). 2018;8:1–16.
ManningCPFruehanRJ.The rate of the phosphorous reaction between liquid iron and slag. Metall Mater Trans B. 2013;44B:37–44.
6.
Mazdoor Kisan Shakti Sangathan, NehruJawaharlal: Bureau of Indian Standards, Amendment No. 1, June 2010 TO IS 12668, Indian Standard, Melting Characteristics of Sponge Iron/Direct Reduced Iron (DRI), 1989, pp. 1–6.
7.
World Direct Reduction Statistics 2018 (Midrex Technologies, Inc., 2019) [cited 2021 Feb 15]. Available from: www.midrex.com, pp. 1–10.
8.
World Steel in Figures 2019 (World Steel Association 2019) [cited 2021 Feb 16]. Available from: www.worldsteel.org, pp. 1–12.
9.
GroblerFMinnittRCA.The increasing role of direct reduced iron in global steelmaking. J S Afr Inst Min Metall. 1999;2(March/April): 111–116.
10.
TanakaH.Resources trend and use of direct reduced iron in steelmaking process. Kobelco Technol Rev. 2015;33:1–7.
11.
ElkaderMAFathyAMegahedGet al.Influence of direct-reduced iron percentage in EAF charge mix on EAF operation parameters. 12th International Conference on Mining, Petroleum and Metallurgical Engineering steel-grips.com June 2014. p. 13–22.
12.
ElkaderMAFathyAEissaMet al.Effect of direct reduced iron proportion in metallic charge on technological parameters of EAF steelmaking process. Int J Sci Res. 2016;5(2):2016–2024.
13.
MegahedGMFathyAMMorsyMAet al.Improving EAF performance by chemical energy optimization At Ezz flat steel. Ironmaking Steelmaking. 2010;37(6):445–451.
14.
DresselGL. Use of DRI in EAF’s, Part IV: direct reduced iron process effects and applications [cited 2020 Aug 16]. Available from: https://www.dresseltech.com/dripart4.pdf. Accessed 16 December 2019.
MoralesRDLuleRGLopzFet al.The slag foaming practice in EAF and its influence on the steelmaking shop productivity. ISIJ Int. 1995;35(9):1054–1062.
18.
DengL.Investigation of electric arc furnace chemical reactions and stirring effect [Master Degree Thesis]. SE-100 44 Stockholm: School of Industrial Engineering and Management Department of Materials Science and Engineering Royal Institute of Technology; 2012. p. 46.
19.
SellersN.Chemistry of steel making. J Chem Educ. 1980;57(2):139.
20.
GrigoryanVAYaAStomakhinYet al.Physical chemistry calculations of electric steelmaking plants, 2nd ed.. Moscow: MISiS; 2007. p. 132.
21.
ChatterjeeA.Sponge iron production by direct reduction of iron oxide, 2nd ed.Delhi: PHI Learning; 2010. p. 160.
22.
MandalTMaityAChatterjeeSet al. Charging, hot metal in electric arc furnaces (EAF’s): reducing cost structure and expanding grade horizons [cited 2020 Dec 18]. Available from: http://seaisi.org/file/7B-4%20Charging%20HM%20in%20EAF’s%20-Reducing%20Cost.pdf.
23.
BowmanB.Optimum use of electrodes in arc furnaces. Parma (OH): UCAR Carbon; 1982. p. 1–6.
