An experimental apparatus for simulation of continuous casting process of GCr15 bearing steel billet is established. With the apparatus, the billets of diameter 140 mm are casted in various superheats and cooling conditions. The solidification macrostructure, dendrite morphology, segregation and carbide are investigated. It is shown that melting superheats and cooling conditions remarkably influence the microstructure and solute segregation. It is found that the secondary dendrite arm spacing of the steel increases with the increase of the superheat temperature, and with decrease of the cooling rate. Lower superheat with higher cooling rate promotes the refining of the microstructure. Refining equiaxed grains structure in the centre of the billet leads to lower segregation of carbon. Furthermore, with increasing cooling rates, the spacing of the pearlite laminar is refined and the precipitation of proeutectic carbides is suppressed.
Get full access to this article
View all access options for this article.
References
1.
BhadeshiaHKDH.Steels for bearings. Prog Mater Sic. 2012;57(2):268–435. doi: 10.1016/j.pmatsci.2011.06.002
2.
YangLChengG-GLiS-Jet al.A coupled model of TiN inclusion growth in GCr15SiMn during solidification in the electroslag remelting process. Int J Miner Metall Mater. 2015;22(12):1266–1272. doi: 10.1007/s12613-015-1194-8
3.
FuJ-W.Microstructure and corrosion behavior of hot-rolled GCr15 bearing steel. Appl Phys A. 2016;122(2):416–421. doi: 10.1007/s00339-016-9975-0
4.
FlemingsMC.Our understanding of macrosegregation: past and present. ISIJ Int. 2000;40(9):833–841. doi: 10.2355/isijinternational.40.833
5.
ScholesAet al.Segregation in continuous casting. Ironmak Steelmak. 2005;32(2):101–108. doi: 10.1179/irs.2005.32.2.101
6.
ChoudharySKGangulyS.Morphology and segregation in continuously cast high carbon steel billets. ISIJ Int. 2007;47(12):1759–1766. doi: 10.2355/isijinternational.47.1759
7.
SunHLiLChengXet al.Reduction in macrosegregation on 380 mm×490 mm bloom caster equipped combination M + F-EMS by optimising casting speed. Ironmak Steelmak. 2015;42(6):439–449. doi: 10.1179/1743281214Y.0000000247
8.
GuoJQianD-SDengJ-D.Grain refinement limit during hot radial ring rolling of as-cast GCr15 steel. J Mater Process Technol. 2016;231:151–161. doi: 10.1016/j.jmatprotec.2015.12.018
9.
KyungSOYoungWC.Macrosegregation behavior in continuously cast high carbon steel blooms and billets at the final stage of solidification in combination stirring. ISIJ Int. 1995;35(7):866–875. doi: 10.2355/isijinternational.35.866
10.
ChoudharySKGangulySSenguptaAet al.Solidification morphology and segregation in continuously cast steel slab. J Mater Process Technol. 2017;243:312–321. doi: 10.1016/j.jmatprotec.2016.12.030
11.
PikkarainenTVuorenmaaVRentolaIet al.Effect of superheat on macrostructure and macrosegregation in continuous cast low-alloy steel slabs. 4th International Conference on Advances in Solidification Processes. 8–11th July 2014, Beaumont Estates, Old Windsor, UK. 2016; IOP Publishing (IOP Conf. Series: Materials Science and Engineering 117 (2016) 012064).
12.
DuGLiJWangZ-B.Control of carbide precipitation during electroslag remelting continuous rapid solidification of GCr15 steel. Metall Mater Trans B. 2017;48(6):1–18. doi: 10.1007/s11663-017-1089-3
13.
SunH-BZhangJ-Q.Study on the macrosegregation behavior for the bloom continuous casting: model development and validation. Metall Mater Trans B. 2014;45(3):1133–1149. doi: 10.1007/s11663-013-9986-6
14.
MoriHTanakaMSatoNet al.Macrostructure of and segregation in continuously cast steel billets. Trans ISIJ. 1972;12:102–111.
15.
MooreJJHamiltonJC.Axial segregation in continuously cast steel billets. Metall Mater Technol. 1980;12:569–573.
16.
MooreJJShahNA.Mechanisms of formation of A- and V-segregation incast steel. Int Me Rev. 1983;28(6):338–356.
17.
LudlowVNormantonAAndersonAet al.Strategy to minimise central segregation in high carbon steel grades during billet casting. Ironmak Steelmak. 2005;32(1):68–74. doi: 10.1179/174328105X23978
18.
ZhuH-CLiH-BZhangS-Cet al.Numerical simulation of Mo macrosegregation during ingot casting of high-Mo austenitic stainless steel. Ironmak Steelmak. 2015;42(10):748–755. doi: 10.1080/03019233.2015.1120003
19.
ZengLXuM-QMaX-Ret al.Grain refinement and delta ferrite reduction of high Cr steel ingots by thermal control. ISIJ Int. 2014;54(10):2302–2308. doi: 10.2355/isijinternational.54.2302
20.
ChaubeSTennysonGSinghA.Modelling of columnar-to-equiaxed transition and inclusion distribution in continuously cast steel billets. Trans Indian Inst Met. 2015;68(6):1207–1213. doi: 10.1007/s12666-015-0705-7
21.
ZhouX-FFangFJiangJ-Qet al.Refining carbide dimensions in AISI M2 high speed steel by increasing solidification rates and spheroidising heat treatment. Mater Sci Technol Lond. 2014;30(1):117–122. doi: 10.1179/1743284713Y.0000000338
22.
JiY-LZhangWChenX-Yet al.Increasing solidification rate of M2 high-speed steel ingot by fusible metal mold. Acta Metall Sin (Engl Lett). 2016;29(4):382–387. doi: 10.1007/s40195-016-0398-x
23.
BaiLWangBZhongH-Get al.Experimental and numerical simulations of the solidification process in continuous casting of slab. Metals-Basel. 2016;6(3):53–64. doi: 10.3390/met6030053
24.
LiX-BDingYTangZ-Y.Study of thermo-physical properties GCr15 bearing steel in continuous casting. J Mater Metall. 2010;9(4):241–244.
25.
AlizadehMJahromiAJAboualiO.New analytical model for local heat flux density in the mold in continuous casting of steel. Comput Mater Sci. 2008;44(2):807–812. doi: 10.1016/j.commatsci.2008.05.034
26.
SantosCAQuaresmaJMVGarciaA.Determination of transient interfacial heat transfer coefficients in chill mold casting. J Alloys Comp. 2001;319:174–186. doi: 10.1016/S0925-8388(01)00904-5
27.
GafurMANasrul-HaqueMNarayan-PrabhuK.Effect of chill thickness and Su-perheat on casting/chill interfacial heat transfer during solidification of commercially pure aluminum. J Mater Proces Technol. 2003;133:257–265. doi: 10.1016/S0924-0136(02)00459-4
28.
WangG-XMatthysEF.Experimental determination of the interfacial heat transfer during cooling and solidification of molten metal droplets impacting on a metallic substrate: effect of roughness and superheat. Int J Heat Mass Transfer. 2002;45:4967–4981. doi: 10.1016/S0017-9310(02)00199-0
29.
TahaMAEl-MahallawyNAEl-MestekawiMTet al.Estimation of air gap and heat transfer coefficient at different faces of Al and Al-Si castings solidifying in permanent mould. Mater Sci Technol. 2001;17(9):1093–1101. doi: 10.1179/026708301101511004
30.
AkarNŞahinHMYalçinNet al.Experimental study on the effect of liquid metal superheat and casting height on interfacial heat transfer coefficient. Exp Heat Transfer. 2008;21(1):83–98. doi: 10.1080/08916150701647785
31.
PrydsNHHuangX.The effect of cooling rate on the microstructures formed during solidification of ferritic steel. Metall Mater Trans A. 2000;31:3155–3166. doi: 10.1007/s11661-000-0095-1
32.
JiangDZhuM.Flow and solidification in billet continuous casting machine with dual electromagnetic stirrings of mold and the final solidification. Steel Res. Int. 2015;86(9):993–1003. doi: 10.1002/srin.201400281
33.
Karlinski De BarcellosVLopes Da Silva GschwenterVKytönenHet al.Modelling of heat transfer, dendrite microstructure and grain size in continuous casting of steels. Steel Res Int. 2010;81(6):461–471. doi: 10.1002/srin.201000026
34.
GuoWZhangLZhuM.Modeling on dendrite growth of medium carbon steel during continuous casting. Steel Res Int. 2010;81(4):265–277. doi: 10.1002/srin.200900117
35.
KimHSKobayashiYTsukamotoSet al.Effect of cooling rate on microstructure evolution of rapidly cooled high-impurity steels. Mat Sci Eng A Struct. 2005;403(1-2):311–317. doi: 10.1016/j.msea.2005.05.049
36.
JinH-TSunH-YZhangR-J.Basic rule on carbon macrosegregation of billets in continuous casting of GCr15 bearing steel. China Metallurgy. 2008;18(7):19–24.
37.
XuW-YCaoZ-GYanHC.Macrosegregation in cast bloom of gear steel and its format ion mechanism. Steelmaking. 2011;27(5):63–67.
