Abstract
The equilibrium condition between molten steel and slag during manganese-ore carbon-reduction was studied using both resistance furnaces and induction furnaces. The resistance furnace experiment shows that it is difficult to further increase the yield of manganese (maintained at around 37%) without stirring. The bottom blowing and top slag stirring were strengthened in the induction furnace test, where white slag was continuously produced to promote the carbon reduction of manganese dioxide in slag between molten steel and slag. Under these conditions, the yield of manganese between molten steel and slag can reach greater than 90%. The main factors affecting the manganate capacity are the carbon and silicon content in molten steel. The limiting process of manganese mass transfer is mainly the mass transfer of manganese in molten steel. Under carbon reduction in molten steel the limiting factor affecting the mass transfer of manganese is the mass transfer of manganese in slag.
Get full access to this article
View all access options for this article.