The influence of the Cetrimonium bromide (CTAB) surfactant on the mechanism of electroless Ni–B deposition, corrosion, and scratch resistance of the resulting coatings was studied. Effect of different concentration of the surfactant on deposition rate and surface morphology was studied using SEM. Finally, the effect of an optimized concentration of CTAB surfactant on the surface chemistry, corrosion, and scratch resistance of the Ni–B coating was analysed using GDOES, potentiodynamic polarization, salt spray test, XPS, scratch test, SEM, and EDS. It was found that the CTAB surfactant increases the mass transfer and deposition rate of the coating. Adding CTAB surfactant in electroless solution significantly improves corrosion resistance by eliminating the pits formation at the surface and decreasing the number of defects at the interface which finally improves the formation of stable passive layer. Additionally, the highest scratch resistance was obtained when CTAB surfactant was added into the electroless Ni–B plating bath.
SayyadF, SenanayakeR.Experimental investigation on surface roughness of electroless Ni–B–TiO2 nanocomposite coatings. Sādhanā. 2021;46(2):1–5.
3.
HadipourA, RahseparM, HayatdavoudiH.Fabrication and characterisation of functionally graded Ni-P coatings with improved wear and corrosion resistance. Surf Eng. 2019;35(10):883–890.
4.
VitryV, BoninL, MaletL.Chemical, morphological and structural characterisation of electroless duplex NiP/NiB coatings on steel. Surf Eng. 2018;34(6):475–484.
5.
QianW, WeiH, ChenH, The effect of heat treatment on Ni–B–Ce electroless coatings. Surf Eng. 2019;35(2):144–152.
PalS, SarkarR, JayaramV.Characterization of thermal stability and high-temperature tribological behavior of electroless Ni-B coating. Metall Mater Trans A. 2018;49(8):3217–3236.
8.
Taha-TijerinaJ, Aviña-CamarenaK, Torres-SánchezR, Tribological evaluation of electroless Ni–B coating on metal-working tool steel. Int J Adv Manuf Tech. 2019;103(5):1959–1964.
9.
ShuX, HeZ, WangY, Mechanical properties of Ni-based coatings fabricated by electroless plating method. Surf Eng. 2020;36(9):944–951.
10.
YazdaniS, TimaR, MahboubiF.Investigation of wear behavior of As-plated and plasma-nitrided Ni-B-CNT electroless having different CNTs concentration. Appl Surf Sci. 2018;457(June):942–955. doi:10.1016/j.apsusc.2018.07.020.
11.
YoonJ-D, KooB-H, HwangH-I, Effect of ultrasonic process of electroless Ni-P-Al2O3 composite coatings. J Kor Ins Surf Eng. 2021;54(6):315–323.
12.
NiksefatV, GhorbaniM.Mechanical and electrochemical properties of ultrasonic-assisted electroless deposition of Ni-B-TiO2 composite coatings. J Alloys Compd. 2015;633:127–136. doi:10.1016/j.jallcom.2015.01.250.
13.
WawareUS, NazirR, PrasadA, Preparation and properties of electrodeposited Ni-B-V2O5 composite coatings. Surf Coat Technol. 2021;409:126888.
14.
LiB, ZhangW, MeiT, Synthesis and properties of YSZ and CeO2 dual nanoparticles doped Ni–B matrix nanocomposite coating. Ceram Int. 2020;46(6):8047–8058.
15.
CieślakG, TrzaskaM.Structure and properties of Ni-B/graphene oxide composite coatings produced by chemical reduction method. J Mater Eng Perform. 2020;29(3):1550–1557. doi:10.1007/s11665-020-04726-9.
16.
YazdaniS, MahboubiF, TimaR, Effect of carbon nanotube concentration on the corrosion behavior of electroless Ni-B-CNT coating. J Mater Eng Perform. 2019;28(6):3446–3459. doi:10.1007/s11665-019-04155-3.
17.
BaratiQ, HadaviSMM.Electroless Ni-B and composite coatings: a critical review on formation mechanism, properties, applications and future trends. Surfaces Interfaces. 2020;21:100702.
18.
ChintadaVB, KoonaR, Raju BahubalendruniMVA.State of art review on nickel-based electroless coatings and materials. J Bio Tribo Corros. 2021;7(4):1–14.
19.
RamakrishnanB, Uday Venkat KiranK, Ratna SunilB, Sliding wear characteristics of silver particles incorporated electroless nickel phosphorus composite coatings. In Kalamkar VR, Monkova K, editors, Advances in mechanical engineering. Springer, Singapore, 2021. p. 823–829.
20.
NwosuN, DavidsonA, HindleC, On the influence of surfactant incorporation during electroless nickel plating. Ind Eng Chem Res. 2012;51(16):5635–5644. doi:10.1021/ie202625n.
21.
MuralirajaR, ElansezhianR, SudagarJ, Influence of a zwitterionic surfactant on the surface properties of electroless Ni–P coating on mild steel. J Surfactants Deterg. 2016;19(5):1081–1088.
22.
DoğanF, DuruE, UysalM, Structural, mechanical, and tribological studies of Ni-B-TiN composite coating: effect of SDS concentration. J Adhes Sci Technol. 2022:1–24. doi:10.1080/01694243.2022.2060784.
23.
ElansezhianR, RamamoorthyB, NairPK.The influence of SDS and CTAB surfactants on the surface morphology and surface topography of electroless Ni–P deposits. J Mater Process Technol. 2009;209(1):233–240.
24.
KovalchukNM, TrybalaA, Arjmandi-TashO, Surfactant-Enhanced spreading: experimental achievements and possible mechanisms. Adv Colloid Interface Sci. 2016;233:155–160.
25.
LeTTY, HussainS, LinS-Y.A study on the determination of the critical micelle concentration of surfactant solutions using contact angle data. J Mol Liq. 2019;294:111582.
26.
AkramM, BhatIA.Effect of salt counterions on the physicochemical characteristics of novel green surfactant, ethane-1, 2-diyl Bis (N, N-dimethyl-N-tetradecylammoniumacetoxy) dichloride. Colloids Surf A. 2016;493:32–40.
27.
RafiqueAS, KhodaparastS, PoulosAS, Micellar structure and transformations in sodium alkylbenzenesulfonate (NaLAS) aqueous solutions: effects of concentration, temperature, and salt. Soft Matter. 2020;16(33):7835–7844.
28.
RenZH.Mechanism of the salt effect on micellization of an aminosulfonate amphoteric surfactant. Ind Eng Chem Res. 2015;54(40):9683–9688.
29.
AnguloA, van der LindeP, GardeniersH, Influence of bubbles on the energy conversion efficiency of electrochemical reactors. Joule. 2020;4(3):555–579.
30.
LinC-S, LeeCY, ChenFJ, Structural evolution and internal stress of nickel-phosphorus electrodeposits. J Electrochem Soc. 2005;152(6):C370.
31.
JiS, WalzJY.Depletion forces and flocculation with surfactants, polymers and particles – synergistic effects. Curr Opin Colloid Interface Sci. 2015;20(1):39–45.
32.
Jódar-ReyesAB, Martín-RodríguezA, Ortega-VinuesaJL.Effect of the ionic surfactant concentration on the stabilization/destabilization of polystyrene colloidal particles. J Colloid Interface Sci. 2006;298(1):248–257. doi:10.1016/j.jcis.2005.12.035.
33.
SalarvandZ, AmirnasrM, TalebianM, Enhanced corrosion resistance of mild steel in 1 M HCl solution by trace amount of 2-phenyl-benzothiazole derivatives: experimental, quantum chemical calculations and molecular dynamics (MD) simulation studies. Corros Sci. 2017;114:133–145.
