In this study, SiC coating was prepared on carbon fibres from solution at ambient temperatures for the first time. The thickness of the coating was ∼85 nm. Analysis of the coatings revealed the presence of only SiC in the coating. The initial oxidation temperature of the SiC-coated carbon fibres increased by ∼50°C and the complete oxidation temperature was increased by ∼167°C, indicating excellent oxidation resistance owing to the presence of the SiC coating. We believe that the excellent properties and easy preparation process of SiC coating reported in this paper would provide us with a new way to produce SiC coating on carbon substrates.
JingJY, FuQG, YuanRM.Nanowire-toughened CVD-SiC coating for C/C composites with surface pre-oxidation. Surf Eng. 2018;34(1):1–7.
2.
ZhouW, LongY.Mechanical properties of CVD-SiC coatings with Si impurity. Ceram Int. 2018;44(17):21730–21733.
3.
GawelR, KyziołK, JuraszZ, Oxidation resistance of valve steels covered with thin SiC coatings, obtained by RF CVD. Corros Sci. 2018;145:16–25.
4.
WangWY, FuQG, TanBY.Effect of in-situ grown SiC nanowires on the mechanical properties of HfC-ZrB2-SiC modified C/C composites. J Alloy Compd. 2017;726:866–874.
5.
WangPP, LiHJ, SunJ, The effect of HfB2 content on the oxidation and thermal shock resistance of SiC coating. Surf Coat Tech. 2018;339:124–131.
6.
ShenZ, SuiH, KerrV, Effect of heat treatment on the interfacial bonding between SiC coating and alumina plate. Surf Eng. 2020;36(4):397–404.
7.
LiHJ, ChenZS, LiKZ, Wear behavior of SiC nanowire-reinforced SiC coating for C/C composites at elevated temperatures. J Eur Ceram Soc. 2013;33(15-16):2961–2969.
8.
WuSJ, WangYG, GuoQ, Oxidation protective silicon carbide coating for C/SiC composite modified by a chromium silicide-chromium carbide outer layer. Mater Sci Eng A. 2015;644:268–274.
9.
JiangW, ShenLD, QiuMB, Preparation of Ni-SiC composite coatings by magnetic field-enhanced jet electrodeposition. J Alloy Compd. 2018;762:115–124.
10.
YeXL, ChenZF, AiSF, Enhanced electromagnetic absorption properties of novel 3D-CF/PyC modified by reticulated SiC coating. ACS Sustain Chem Eng. 2019;7(13):11386–11395.
11.
ZhangYP, TaiXQ, ZhouJY, Enhanced high-temperature thermal conductivity of the reduced graphene oxide @ SiO2 composites synthesized by liquid phase deposition. Ceram Int. 2022;48(6):8481–8488.
12.
HuoYL, CuiYL, LiuHL, Study of antioxidants variation of gradient SiC coating on SiCf/SiC composites. J Syn Cryst. 2017;46(9):1818–1822.
13.
QuC, FuSL, WangYX, The research on modified SiC oxidation protective coating for graphite material. Carbon. 2017;4:21–26.
14.
ZouK, ZouJP, DengCM, Preparation and properties of supersonic atmospheric plasma sprayed TiB2-SiC coating. Trans Nonferrous Met Soc China. 2021;31(1):243–254.
15.
AmanovA, KarimbaevR.Effect of surface engineering on wear and fatigue behavior of thermally sprayed SiC coating. Surf Coat Tech. 2022;445:128751.
16.
ZhuXF, ZhangYL, SuYY, SiC-Si coating with micro-pores to protect carbon/carbon composites against oxidation. J Eur Ceram Soc. 2021;41:114–120.
17.
TangZX, YiMZ, WuH, A novel approach for preparing a SiC coating on a C/C-SiC composite by slurry painting and chemical vapor reaction. J Eur Ceram Soc. 2022;42:1884–1892.
18.
XuM, GuoLJ, FuYQ.Effect of pyrocarbon texture on the mechanical and oxidative erosion property of SiC coating for protecting carbon/carbon composites. Ceram Int. 2021;47(23):32657–32665.
19.
XieYH, TangZP.Research progress of SiCf/SiC composite cladding by CVI process. China Ceram. 2022;8:7–15.
20.
ZhaoXN, WangXD, XinH, Controllable preparation of SiC coating protecting carbon fiber from oxidation damage during sintering process and SiC coated carbon fiber reinforced hydroxyapatite composites. Appl Surf Sci. 2018;450:265–272.
21.
ZhouW, XiaoP, LuoW, Microstructural evolution of SiC coating on C/C composites exposed to 1500oC in ambient air. Ceram Int. 2018;45(1):854–860.
22.
KrishnaraoRV, AlamMZ, DasDK.In-situ formation of SiC, ZrB2-SiC and ZrB2-SiC-B4C-YAG coatings for high temperature oxidation protection of C/C composites. Corros Sci. 2018;141:72–80.
23.
HeZ, LianPF, SongY, Protecting nuclear graphite from liquid fluoride salt and oxidation by SiC coating derived from polycarbosilane. J Eur Ceram Soc. 2018;38(2):453–462.
24.
LinT, JiangK, ZhouBX, Liquid-phase-deposited silicon oxide film as a mask for single-sided texturing of monocrystalline Si wafers. ACS Appl Mater Interfaces. 2014;6(2):1207–1212.
25.
HwangHS, LeeJB, JungJ, Highly flexible TiO2-coated stainless steel fabric electrode prepared by liquid-phase deposition. J Power Sources. 2016;330:204–210.
26.
NewsomeDA, SenguptaD, DuinAC.High-temperature oxidation of SiC-based composite: rate constant calculation from reaxFF MD simulations, Part II. J Phys Chem C. 2013;117(10):5014–5027.
27.
ZhangRL, LiX.Kinetics simulation of Zn extraction from dust dried in blast furnace by carbothermic reduction in vacuum. Chin J Vac Sci Technol. 2014;34(1):53–57.
28.
SunHH, LiX.Study on pyrolysis characteristics of coking coal by Coats-Redfern integral method. Modern Salt Chem Ind. 2017;44(5):22–24.
