In this study, the effect of cellulose nanoparticles (CNs) on the corrosion and mechanical behaviour of the biodegradable polylactic acid (PLA) coating was investigated. For this purpose, 1, 5, and 10 wt-% of CNs were added to the PLA coating. By adding CNs to the coating, the corrosion resistance of the PLA coating increased and the highest improvement in corrosion resistance was obtained at 5 wt-% of CNs. Further increase of CNs from 5 to 10 wt-% reduces the corrosion resistance of the PLA coating due to a decrease in the adhesion of the coating to the substrate from 2.4 to 1.6 MNm−2. Also, the presence of CNs gives higher hardness and better mechanical properties.
AfrahAH, SmithR, GauthierER, Investigation of a cyanine dye assay for the evaluation of the biocompatibility of magnesium alloys by direct and indirect methods. Bioact Mater. 2020;5:26–33. doi: 10.1016/j.bioactmat.2019.12.002
2.
ShahinM, MunirK, WenC, Magnesium-based composites reinforced with graphene nanoplatelets as biodegradable implant materials. J Alloys Compd. 2020;828:154461. doi: 10.1016/j.jallcom.2020.154461
3.
LiangY, LuanX, LiuX.Recent advances in periodontal regeneration: a biomaterial perspective. Bioact Mater. 2020;5:297–308. doi: 10.1016/j.bioactmat.2020.02.012
4.
SchonM, FiniM, GiavaresiG, In vivo preclinical efficacy of a PDLLA/PGA porous copolymer for dental application. J Biomed Mater Res B. 2009;88(2):349–357. doi: 10.1002/jbm.b.31062
5.
IfkovitsJL, BurdickJA.Photopolymerizable and degradable biomaterials for tissue engineering applications. Tissue Eng. 2007;13(10):2369–2385. doi: 10.1089/ten.2007.0093
6.
HornbergerH, VirtanenS, BoccacciniA.Biomedical coatings on magnesium alloys – a review. Acta Biomater. 2012;8(7):2442–2455. doi: 10.1016/j.actbio.2012.04.012
7.
ShuaiC, WangB, BinS, Interfacial strengthening by reduced graphene oxide coated with MgO in biodegradable Mg composites. Mater Design. 2020;191:108612. doi: 10.1016/j.matdes.2020.108612
8.
JanaA, DasM, BallaVK.Effect of heat treatment on microstructure, mechanical, corrosion and biocompatibility of Mg-Zn-Zr-Gd-Nd alloy. J Alloys Compd. 2020;821:153462. doi: 10.1016/j.jallcom.2019.153462
9.
ErbelR, MarioCD, BartunekJ, Temporary scaffolding of coronary arteries with bioabsorbable magnesium stents: a prospective, non-randomised multicentre trial. Lancet. 2007;369(9576):1869–1875. doi: 10.1016/S0140-6736(07)60853-8
10.
BertuolaM, MinanA, GrilloCA, Corrosion protection of AZ31 alloy and constrained bacterial adhesion mediated by a polymeric coating obtained from a phytocompound. Colloids Surf B Biointerfaces. 2018;172:187–196. doi: 10.1016/j.colsurfb.2018.08.025
11.
YangK, LinX.Biocompatibility of surface-modified magnesium and magnesium alloys. In: Sankara NarayananTSN, Il-ParkS, LeeMH, editors. Surface modification of magnesium and its alloys for biomedical applications. Cambridge
: Woodhead Publishing; 2015. p. 231–260. doi: 10.1016/B978-1-78242-077-4.00007-3
12.
XuL, ZhangE, YangK.Phosphating treatment and corrosion properties of Mg–Mn–Zn alloy for biomedical application. J Mater Sci Mater Med. 2009;20(4):859–867. doi: 10.1007/s10856-008-3648-2
13.
TianP, LiuX.Surface modification of biodegradable magnesium and its alloys for biomedical applications. Regen Biomater. 2015;2(2):135–151. doi: 10.1093/rb/rbu013
14.
LiLY, CuiLY, ZengRC, Advances in functionalized polymer coatings on biodegradable magnesium alloys – a review. Acta Biomater. 2018;79:23–36. doi: 10.1016/j.actbio.2018.08.030
15.
LenzRW.Biodegradable polymers. In: LangerRS, PeppasNA, editors. Biopolymers I. Advances in polymer science. Berlin
: Springer; 1993. p. 1–40. doi: 10.1007/BFb0027550
16.
ChenY, SongY, ZhangS, Interaction between a high purity magnesium surface and PCL and PLA coatings during dynamic degradation. Biomed Mater. 2011;6(2):025005. doi: 10.1088/1748-6041/6/2/025005
17.
PrabhuDB, GopalakrishnanP, RaviK.Coatings on implants: study on similarities and differences between the PCL coatings for Mg based lab coupons and final components. Mater Design. 2017;135:397–410. doi: 10.1016/j.matdes.2017.09.043
18.
LiCY, YuC, ZengRC, In vitro corrosion resistance of a Ta2O5 nanofilm on MAO coated magnesium alloy AZ31 by atomic layer deposition. Bioact Mater. 2020;5(1):34–43. doi: 10.1016/j.bioactmat.2019.12.001
19.
MaJ, ThompsonM, ZhaoN, Similarities and differences in coatings for magnesium-based stents and orthopaedic implants. J Orthop Transl. 2014;2(3):118–130.
20.
ZhaoJ, ChenLJ, YuK, Effects of chitosan coating on biocompatibility of Mg–6%Zn–10%Ca3(PO4)2 implant. Trans Nonferrous Met Soc China. 2015;25(3):824–831. doi: 10.1016/S1003-6326(15)63669-X
21.
UllahH, WahidF, SantosHA, Advances in biomedical and pharmaceutical applications of functional bacterial cellulose-based nanocomposites. Carbohydr Polym. 2016;150:330–352. doi: 10.1016/j.carbpol.2016.05.029
22.
BrinchiL, CotanaF, FortunatiE, Production of nanocrystalline cellulose from lignocellulosic biomass: technology and applications. Carbohydr Polym. 2013;94(1):154–169. doi: 10.1016/j.carbpol.2013.01.033
23.
GyőriE, FábiánI, LázárI.Effect of the chemical composition of simulated body fluids on aerogel-based bioactive composites. J Compos Sci. 2017;1(2):15. doi: 10.3390/jcs1020015
24.
MolaviFK, GhasemiI, MessoriM, Nanocomposites based on poly (L-lactide)/poly (ε-caprolactone) blends with triple-shape memory behavior: effect of the incorporation of graphene nanoplatelets (GNps). Compos Sci Technol. 2017;151:219–227. doi: 10.1016/j.compscitech.2017.08.021
25.
LiW, LiL, CaoY, Effects of PLA film incorporated with ZnO nanoparticle on the quality attributes of fresh-cut apple. Nanomaterials. 2017;7(8):207. doi: 10.3390/nano7080207
26.
KeshkSMAS, YahiaIS.Physicochemical characterization of different cellulose polymorphs/graphene oxide composites and their antibacterial activity. Turk J Chem. 2018;42(2):562–571.
27.
ZhangW, ChenY, ChenM, Strengthened corrosion control of poly (lactic acid)(PLA) and poly (ε-caprolactone)(PCL) polymer-coated magnesium by imbedded hydrophobic stearic acid (SA) thin layer. Corros Sci. 2016;112:327–337. doi: 10.1016/j.corsci.2016.07.027
28.
MolaviFK, GhasemiI, MessoriM, Design and characterization of novel potentially biodegradable triple-shape memory polymers based on immiscible poly(L-lactide)/poly(ϵ-caprolactone) Blends. J Polym Environ. 2019;27:632–642. doi: 10.1007/s10924-019-01366-6
29.
LasprillaAJR, MartinezGAR, HossB.Synthesis and characterization of poly (lactic acid) for use in biomedical field. Chem Eng. 2011;24:985–990.
30.
BodirlauR, TeacaC.Fourier transform infrared spectroscopy and thermal analysis of lignocellulose fillers treated with organic anhydrides. Rom J Phys. 2009;54(1–2):93–104.
31.
PashaeiS, HosseinzadehS, HosseinzadehH.TGA investigation and morphological properties study of nanocrystalline cellulose/ag-nanoparticles nanocomposites for catalytic control of oxidative polymerization of aniline. Polym Compos. 2019;40(S1):753–764. doi: 10.1002/pc.25000
32.
FortunatiE, PeltzerM, ArmentanoI, Effects of modified cellulose nanocrystals on the barrier and migration properties of PLA nano-biocomposites. Carbohydr Polym. 2012;90(2):948–956. doi: 10.1016/j.carbpol.2012.06.025
33.
BartellF, RayBR.Wetting characteristics of cellulose derivatives. I. contact angles formed by water and by organic liquids. J Am Chem Soc. 1952;74(3):778–783. doi: 10.1021/ja01123a058
34.
AuclairN, KabooraniA, RiedlB, Influence of modified cellulose nanocrystals (CNC) on performance of bionanocomposite coatings. Prog Org Coat. 2018;123:27–34. doi: 10.1016/j.porgcoat.2018.05.027
35.
HassannejadH, MoghaddasiM, SaebnooriE, Microstructure, deposition mechanism and corrosion behavior of nanostructured cerium oxide conversion coating modified with chitosan on AA2024 aluminum alloy. J. Alloys Compd. 2017;725:968–975. doi: 10.1016/j.jallcom.2017.07.253
36.
WangH, EstrinY, ZúberováZ.Bio-corrosion of a magnesium alloy with different processing histories. Mater Lett. 2008;62(16):2476–2479. doi: 10.1016/j.matlet.2007.12.052
