An Nd:YAG laser was used to fabricate biomimetic hexagonal micro-textures on the mating surfaces of steel guideways. The influence of the micro-textures under grease lubrication on the tribological performances of guideways was determined using a guideway reciprocating sliding tester facility for different micro-textures distributions and orientations, loads and sliding speeds. Results revealed that biomimetic hexagonal micro-textures had a positive influence on the tribological properties of guideway when only one surface was textured, but they would play the opposite role if both of the mating surfaces were textured. The friction coefficient of one-side-textured guideways was reduced and the wear was improved in comparison to polished guideways. Moreover, on the condition of higher loads and sliding speeds, the micro-textures in which two sides of each hexagon are perpendicular to the sliding direction of the guideway showed the optimal tribological properties due to the hydrodynamic effect.
ZhaoB, ZhangS, LiJ, Friction characteristics of sliding guideway material considering original surface functional parameters under hydrodynamic lubrication. P I Mech Eng J-J Eng. 2016;231(7):813–825.
2.
LiuCP, HuJP, HuQ.Preview control of hydrostatic guideway for ultraprecision CNC machine tools. Iran J Sci Technol Trans Mech Eng. 2019;43(1):749–759. doi: 10.1007/s40997-018-0192-7
3.
Zhang DYZ, WeiFF, et alX.Effect of texture parameters on the tribological properties of spheroidal graphite cast iron groove-textured surface under sand-containing oil lubrication conditions. Wear. 2019;428:470–480. doi: 10.1016/j.wear.2019.04.015
4.
EkinciTO, MayerJRR, CloutierGM.Investigation of accuracy of aerostatic guideways. Int J Mach Tool Manuf. 2009;49(6):478–487. doi: 10.1016/j.ijmachtools.2009.01.001
5.
PodsiadloP, WolskiM, StachowiakGW.Directional signatures of surface texture. Tribol Lett. 2019;67(4):109. doi: 10.1007/s11249-019-1219-y
6.
SinglaYK, AroraN, DwivediDK, Influence of niobium on the microstructure and wear resistance of iron-based hardfacings produced by pre-placement technique – a novel approach. Int J Adv Manuf Technol. 2017;93(5–8):2667–2674. doi: 10.1007/s00170-017-0708-0
7.
GrzesikW, ŻakK, KiszkaP.Comparison of surface textures generated in hard turning and grinding operations. Procedia CIRP. 2014;13:84–89. doi: 10.1016/j.procir.2014.04.015
8.
ParkJ, LeeW, ChoiT, Layer-modulated synthesis of uniform tungsten disulfide nanosheet using gas-phase precursors. Nanoscale. 2015;7:1308–1313. doi: 10.1039/C4NR04292A
9.
DumitruG, RomanoV, WeberHP, Laser microstructuring of steel surfaces for tribological applications. Appl Phys A-Mater. 2000;70:485–487. doi: 10.1007/s003390051073
10.
YilbasBS.Laser treatment of zirconia surface for improved surface hydrophobicity. J Alloy Compd. 2015;625:208–215. doi: 10.1016/j.jallcom.2014.11.069
11.
BhaduriD, BatalA, DimovSS, On design and tribological behaviour of laser textured surfaces. Procedia CIRP. 2017;60:20–25. doi: 10.1016/j.procir.2017.02.050
12.
TripathiK, GyawaliG, AmanovA, Synergy effect of ultrasonic nanocrystalline surface modification and laser surface texturing on friction and wear behavior of graphite cast iron. Tribol Trans. 2017;60(2):226–237. doi: 10.1080/10402004.2016.1158339
13.
GropperD, WangL, HarveyTJ.Hydrodynamic lubrication of textured surfaces: a review of modeling techniques and key findings. Tribol Int. 2016;94:509–529. doi: 10.1016/j.triboint.2015.10.009
14.
GuC, MengX, XieY, Effects of surface texturing on ring liner friction under starved lubrication. Tribol Int. 2016;94:591–605. doi: 10.1016/j.triboint.2015.10.024
15.
DuanR, DengJ, LeiS, Effect of derivative cutting on machining performance of micro textured tools. J Manuf Process. 2019;45:544–556. doi: 10.1016/j.jmapro.2019.07.037
16.
AdjemoutM, BrunetiereN, BouyerJ.Numerical analysis of the texture effect on the hydrodynamic performance of a mechanical seal. Surf Topogr-Metrol Prop. 2013;67(4):278–288.
17.
MorgridgeD, EvansHP, SnidleRW, A study of seal lubrication in an aerospace fuel gear pump including the effects of roughness and mixed lubrication. Tribol Trans. 2011;54(4):657–665. doi: 10.1080/10402004.2011.589963
18.
JianxinD, WenlongS, HuiZ.Design, fabrication and properties of a self-lubricated tool in dry cutting. Int J Mach Tool Manuf. 2009;49(1):66–72. doi: 10.1016/j.ijmachtools.2008.08.001
19.
EtsionI, HalperinG, BrizmerV, Experimental investigation of laser surface textured parallel thrust bearings. Tribol Lett. 2004;17(2):295–300. doi: 10.1023/B:TRIL.0000032467.88800.59
20.
ZhangKD, DengJX, MengR, Influence of laser substrate pretreatment on anti-adhesive wear properties of WC/Co-based TiAlN coatings against AISI 316 stainless steel. Int J Refract Metals Hard Mater. 2016;57:101–114. doi: 10.1016/j.ijrmhm.2016.03.004
DrotlefDM, StepienL, KapplM, Insights into the adhesive mechanisms of tree frogs using artificial mimics. Adv Funct Mater. 2013;23(9):1137–1146. doi: 10.1002/adfm.201202024
23.
ChintapalliRK, MirkhalafM, DastjerdiAK, Fabrication, testing and modeling of a new flexible armor inspired from natural fish scales and osteoderms. Bioinspir Biomim. 2014;9(3):036005. doi: 10.1088/1748-3182/9/3/036005
24.
ZhangB, HuangW, WangXL.Biomimetic surface design for ultrahigh molecular weight polyethylene to improve the tribological properties. P I Mech Eng J-J. 2012;226(8):705–713.
25.
HeB, ChenW, WangQ.Surface texture effect on friction of a microtextured poly(dimethylsiloxane)(PDMS). Tribol Lett. 2008;31:187–197. doi: 10.1007/s11249-008-9351-0
26.
HeinrichG, KluppelG, VilgisTA.Evaluation of self-affine surfaces and their implication for friction dynamics as illustrated with a rouse material. Comput Theor Polym Sci. 2000;10:53–61. doi: 10.1016/S1089-3156(99)00033-1
27.
PodgornikB, VilhenaLM, SedlacekM, Effectiveness and design of surface texturing for different lubrication regimes. Meccanica. 2012;47(7):1613–1622. doi: 10.1007/s11012-012-9540-7
28.
LiuYY, DengJX, WuFF, Wear resistance of carbide tools with textured flank-face in dry cutting of green alumina ceramics. Wear. 2017;372–-373:91–103. doi: 10.1016/j.wear.2016.12.001
29.
VilhenaLM, PodgornikB, VizintinJ, Influence of texturing parameters and contact conditions on tribological behaviour of laser textured surfaces. Meccanica. 2011;46(3):567–575. doi: 10.1007/s11012-010-9316-x
30.
LiXL, YueW, HuangF, Tribological behaviour of textured titanium under abrasive wear. Surf Eng. 2019;35(4):378–386. doi: 10.1080/02670844.2018.1512233
31.
YueHZ, DengJX, GeDL, Effect of surface texturing on tribological performance of sliding guideway under boundary lubrication. J Manuf Process. 2019;47:172–182. doi: 10.1016/j.jmapro.2019.09.031
32.
HuaXJ, SunJG, ZhangPY, Tribological properties of laser microtextured surface bonded with composite solid lubricant at high temperature. J Tribol-T ASME. 2016;138(3):0313021–3130211. doi: 10.1115/1.4032522
33.
HuaXJ, XieX, YinBF, Tribological performance and self-lubricating mechanism of the laser textured surface filled with solid lubricant in rolling friction pair. Ind Lubr Tribol. 2018;70(2):371–384. doi: 10.1108/ILT-07-2017-0210
34.
BrunetiereN, FranciscoA.Lubrication mechanisms between parallel rough surfaces. Tribol Lett. 2019;67(4):116. doi: 10.1007/s11249-019-1228-x
