Boron doped diamond (BDD) film is deposited on two types of texture cemented carbide inserts by hot filament vapour deposition (HFCVD) method. The surface morphology and composition of boron doped textured diamond (BDTD) film are characterized by scanning electron microscopy and Raman spectroscopy, respectively. And the influence of different texture shape parameters on adhesion strength and cutting performance of BDTD film tools are analysed by an indentation test and milling test, respectively. The results showed that the texture has a significant effect on grain growth and quality of the diamond film. In addition, texture can further enhance the adhesion strength of diamond film. The adhesion strength of BDTD film is better than that of BDD films. Concurrently, the boron doped groove textured diamond (BDGTD) film tool has longer tool life and a better cutting performance than the other three kinds of diamond film tools due to its suitable texture shapes.
LiaoM, SunH, HuangK, Cutting performance and failure mechanisms of a pure WC cutting tool in dry cutting of Cr12Mn5Ni4Mo3Al stainless steels and HT200 grey cast iron. Mater Manuf Process. 2017;32(13):1512–1521. doi: 10.1080/10426914.2017.1279315
2.
FanY, HaoZ, ZhengM, Wear characteristics of cemented carbide tool in dry-machining Ti-6Al-4V. Mach Sci Technol. 2016;20(2):249–261. doi: 10.1080/10910344.2016.1165837
3.
NingF, CongW, WangH, Surface grinding of CFRP composites with rotary ultrasonic machining: a mechanistic model on cutting force in the feed direction. Int J Adv Manuf Technol. 2017;92:1217–1229. doi: 10.1007/s00170-017-0149-9
4.
PhapaleK, AhireA, SinghR.Experimental characterization and finite element modeling of critical thrust force in CFRP drilling. Mach Sci Technol. 2018;22(2):249–270. doi: 10.1080/10910344.2017.1337134
5.
StepashkinAA, OzherelkovDY, SazonovYB, Fracture toughness evolution of a carbon/carbon composite after low-cycle fatigue. Eng Fract Mech. 2019;206:442–451. doi: 10.1016/j.engfracmech.2018.12.018
6.
NajarKA, SheikhNA, ShahMA.Enhancement in tribological and mechanical properties of cemented tungsten carbide substrates using CVD-diamond coatings. Tribol Ind. 2017;39(1):20–30. doi: 10.24874/ti.2017.39.01.03
7.
YangL, JiangC, GuoS, Novel diamond films synthesis strategy: methanol and argon atmosphere by microwave plasma CVD method without hydrogen. Nanoscale Res Lett. 2016;11(1):415. doi: 10.1186/s11671-016-1628-x
8.
LiangQ.Boron doped nanostructured diamond films. Birmingham
: The University of Alabama at Birmingham; 2004.
9.
NajarKA, SheikhNA, ButtMM, Enhancing the wear resistance of WC–Co cutting inserts using synthetic diamond coatings. Ind Lub Tribol. 2018;70(7):1224–1233. doi: 10.1108/ILT-04-2017-0089
10.
KhunNW, LiuE.Investigation of structure, adhesion strength, wear performance and corrosion behavior of platinum/ruthenium/nitrogen doped diamond-like carbon thin films with respect to film thickness. Mater Chem Phys. 2011;126(1/2):220–226. doi: 10.1016/j.matchemphys.2010.11.036
11.
OzekiK, MasuzawaT, HirakuriKK.The wear properties and adhesion strength of the diamond-like carbon film coated on SUS, Ti and Ni-Ti with plasma pre-treatment. Biomed Mater Eng. 2010;20(1):21–35.
12.
KonkhunthotN, PhotongkamP, WongpanyaP.Improvement of thermal stability, adhesion strength and corrosion performance of diamond-like carbon films with titanium doping. Appl Surf Sci. 2019;469:471–486. doi: 10.1016/j.apsusc.2018.11.028
13.
WangY, ZhouD, HuangH, Effects of the surface texture in a compressor impeller shaft on its remanufacturing using HVOF. Int J Adv Manuf Technol. 2017;93(5–8):2423–2432. doi: 10.1007/s00170-017-0644-z
CuiYX, ShenB, SunFH.Diamond deposition on WC–Co substrate with amorphous SiC interlayer. Surf Eng. 2014;30(4):237–243. doi: 10.1179/1743294414Y.0000000250
16.
ZhangJ, WangX, ShenB, Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP. Int J Refract Met Hard Mater. 2013;41:285–292. doi: 10.1016/j.ijrmhm.2013.04.017
17.
WangL, LiuJ, TangT, The Abrasion resistance and adhesion of HFCVD boron and silicon-doped diamond films on WC–Co drawing dies. Surf Rev Lett. 2017;24(7):1. doi: 10.1142/S0218625X17500901
18.
SommerM, Smith FW.Effect of oxygen on filament activity in diamond chemical vapor deposition. J Vacuum Sci Technol. 1991;9(3):1134–1139. doi: 10.1116/1.577590
19.
TerashimaC, AriharaK, OkazakiS, Fabrication of vertically aligned diamond whiskers from highly boron-doped diamond by oxygen plasma etching. ACS Appl Mater Inter. 2011;3(2):177–182. doi: 10.1021/am1007722
20.
ZouYS, LiZX, YangH.Microstructure and field electron emission properties of boron doped diamond films. Surf Eng. 2011;27(4):294–299.
21.
LiaoK, WangW, ZhangZ, Study of boron doped diamond films by hot filament CVD. Acta Phys Sin. 1996;10:173–178.
22.
KumarD, ChandranM, Ramachandra RaoMS.Effect of boron doping on first-order Raman scattering in superconducting boron doped diamond films. Appl Phys Lett. 2017;110(19):191602. doi: 10.1063/1.4982591
23.
LuoX, YangJ, LiuH, Predicting two-dimensional boron–carbon compounds by the global optimization method. J Am Chem Soc. 2011;133(40):16285–16290. doi: 10.1021/ja2072753
24.
WangX, WangC, SunF.Development and growth time optimization of the boron-doped micro-crystalline, pristine micro-crystalline and pristine fine-grained composite diamond film. Proc Inst Mech Eng Part B J Eng Manuf. 2016;232(7):1244–1258. doi: 10.1177/0954405416666902
