In this study, the functionally graded Ni–P coatings with low phosphorus top most layers were deposited on the copper substrates by the electroless plating process. The surface morphology and cross-section observations were made by using scanning electron microscopy and optical microscopy. The results showed that electroless deposition of the Ni–P coatings with gradual change of phosphorus content led to a crack-free compact nodular morphology. Also, by using the graded Ni–P coatings, the wear and corrosion resistance were improved. The multilayer coating with the sequence of Ni-high P/Ni-medium P/Ni-low P layers from the substrate to the top surface exhibited the best wear and corrosion resistance.
RahseparM, BahrololoomME.Study of surface roughness and corrosion performance of Ni/Zn–Fe and Zn–Fe/Ni compositionally modulated multilayer coatings. Surf Coat Technol. 2009;204:580–585. doi: 10.1016/j.surfcoat.2009.08.036
2.
ChenXM, LiGY, LianJS.Deposition of electroless Ni-P/Ni-W-P duplex coatings on AZ91D magnesium alloy. Trans Nonferrous Met Soc China (English Edition). 2008;18:323–328. doi: 10.1016/S1003-6326(10)60225-7
3.
XuS, HuX, YangY, Effect of carbon nanotubes and their dispersion on electroless Ni-P under bump metallization for lead-free solder interconnection. J Mater Sci: Mater Electron. 2014;25:2686–2691.
4.
IkedaA, SakamotoA, HattoriR, Electroless Ni–B plating on SiO2 with 3-aminopropyl-triethoxysilane as a barrier layer against Cu diffusion for through-Si via interconnections in a 3-dimensional multi-chip package. Thin Solid Films. 2009;517:1740–1745. doi: 10.1016/j.tsf.2008.09.068
DuariS, BarmanTK, SahooP.Comparative study of tribological properties of Ni-P coatings under dry and lubricated conditions. J Mater Process Technol. 2014;5:978–987.
7.
VitryV, DelaunoisF, DumortierC.Mechanical properties and scratch test resistance of nickel – boron coated aluminium alloy after heat treatments. Surf Coat Technol. 2008;202:3316–3324. doi: 10.1016/j.surfcoat.2007.12.001
8.
NarayananTSNS, KrishnaveniK, SeshadriSK.Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Mater Chem Phys. 2003;82:771–779. doi: 10.1016/S0254-0584(03)00390-0
ChibaA, HaijimaH, WuW.Effect of sonication on the electroless Ni–B deposited powder from acid bath. Ultrasonics. 2004;42:617–620. doi: 10.1016/j.ultras.2004.01.084
11.
StraffeliniG, ColomboD, MolinariA.Surface durability of electroless Ni – P composite deposits. Wear. 1999;236:179–188. doi: 10.1016/S0043-1648(99)00273-2
12.
KeongKG, ShaW, MalinovS.Crystallisation kinetics and phase transformation behaviour of electroless nickel–phosphorus deposits with high phosphorus content. J Alloys Compds. 2002;334:192–199. doi: 10.1016/S0925-8388(01)01798-4
13.
GuC, LianJ, LiG, High corrosion-resistant Ni–P/Ni/Ni – P multilayer coatings on steel. Surf Coat Technol. 2005;197:61–67. doi: 10.1016/j.surfcoat.2004.11.004
14.
GadhariP, SahooP.Effect of process parameters on microhardness of Ni-P-Al2O3 composite coatings. Procedia Mater Sci. 2014;6:623–632. doi: 10.1016/j.mspro.2014.07.077
15.
SahooP, DasSK.Tribology of electroless nickel coatings – a review. Mater Des. 2011;32:1760–1775. doi: 10.1016/j.matdes.2010.11.013
16.
HeP, HuangS, WangH, Electroless nickel – phosphorus plating on silicon carbide particles for metal matrix composites. Ceram Int. 2014;40:16653–16664. doi: 10.1016/j.ceramint.2014.08.027
17.
BozziniB.Relationships among crystallographic structure, mechanical properties and tribological behaviour of electroless Ni – P (9%)/B4C films. Wear. 1999;225:806–813. doi: 10.1016/S0043-1648(98)00389-5
18.
WangY, ShuX, WeiS, Duplex Ni – P – ZrO2/Ni–P electroless coating on stainless steel. J Alloys Compds. 2015;630:189–194. doi: 10.1016/j.jallcom.2015.01.064
19.
JiaqiangG, YatingW, LeiL, Crystallization behavior of nanometer-sized Al2O3 composite coatings prepared by electroless deposition. Mater Lett. 2005;59:391–394. doi: 10.1016/j.matlet.2004.09.032
20.
HadipourA, MonirvaghefiSM.Comparison of H–Cr single layer and Ni–P/H–Cr duplex coating. Surf Eng. 2015;31:666–672. doi: 10.1179/1743294415Y.0000000007
21.
RahseparM, BahrololoomME.Corrosion study of Ni/Zn compositionally modulated multilayer coatings using electrochemical impedance spectroscopy. Corr Sci. 2009;51:2537–2543. doi: 10.1016/j.corsci.2009.06.030
22.
RahseparM, BahrololoomME.Corrosion resistance of Ni/Zn – Fe/Zn and Ni/Zn /Zn – Fe compositionally modulated multilayer coatings. Corr Eng Sci Technol. 2011;46:70–75. doi: 10.1179/147842208X388771
23.
ShafeiZ, BahrololoomME, HashemiB.Electrodeposition of nanocrystalline Ni/Ni – Al2O3 nanocomposite modulated multilayer coatings. Mater Des. 2016;108:19–26. doi: 10.1016/j.matdes.2016.06.018
24.
KananiN.Electroplating – Basic principles, process and practice. Berlin
: First, Elsevier; 2006.
25.
RahseparM, MohebbiF, HayatdavoudiH.Synthesis and characterization of inhibitor-loaded silica nanospheres for active corrosion protection of carbon steel substrate. J Alloys Compds. 2017;709:519–530. doi: 10.1016/j.jallcom.2017.03.104
26.
HayatdavoudiH, RahseparM.A mechanistic study of the enhanced cathodic protection performance of graphene-reinforced zinc rich nanocomposite coating for corrosion protection of carbon steel substrate. J Alloys Compds. 2017;727:1148–1156. doi: 10.1016/j.jallcom.2017.08.250
27.
HayatdavoudiH, RahseparM.Smart inhibition action of layered double hydroxide nanocontainers in zinc-rich epoxy coating for active corrosion protection of carbon steel substrate. J Alloys Compds. 2017;711:560–567. doi: 10.1016/j.jallcom.2017.04.044
