Atmospheric plasma treatment followed by a plasma polymerisation coating produced an aluminium surface having high water repellency and icephobicity. We varied the plasma parameters and the amount of hexamethyldisiloxane precursor to optimise surface hydrophobicity. The static contact and sliding angles of the surface reached 163° and <1°, respectively. Furthermore, the prepared surfaces remained superhydrophobic after seven days of immersion in acid–base media as well as after five icing/de-icing cycles.
ChaudhariAtul, Coppage-GrossJacob, RanganKrishnaswamy, Multifunctionally modified superhydrophobic aluminum and fabric surfaces with reduced gram-negative and gram-positive bacterial attachment: a possible approach for self-cleaning aircraft and crew cabin surfaces. Mater Manuf Processes. 2016;31(9):1156–1161. doi:10.1080/10426914.2015.1093137.
2.
YuH, Superhydrophobic surface prepared by micromilling and grinding on aluminium alloy. Surf Eng. 2016;32(2):108–113. doi: 10.1179/1743294414Y.0000000405
ArianpourF, FarzanehM, JafariR.Hydrophobic and ice-phobic properties of self-assembled monolayers (SAMs) coatings on AA6061. Prog Org Coat. 2016;93:41–45. doi: 10.1016/j.porgcoat.2015.12.008
5.
RykaczewskiK, Mechanism of frost formation on lubricant-impregnated surfaces. Langmuir. 2013;29(17):5230–5238. doi: 10.1021/la400801s
6.
BasuB, Improved corrosion protection of aluminium alloy AA 2024 by sol–gel hybrid coatings after surface pretreatment by silanisation. Surf Eng. 2012;28(4):294–299. doi: 10.1179/1743294411Y.0000000074
7.
LuoG, Preparation and performance enhancements of wear-resistant, transparent PU/SiO2 superhydrophobic coating. Surf Eng. 2018;34(2):139–145. doi: 10.1080/02670844.2016.1236068
8.
MomenG, FarzanehM, JafariR.Wettability behaviour of RTV silicone rubber coated on nanostructured aluminium surface. Appl Surf Sci. 2011;257(15):6489–6493. doi: 10.1016/j.apsusc.2011.02.049
9.
MaN, Preparation of super-hydrophobic surface on Al–Mg alloy substrate by electrochemical etching. Surf Eng. 2018: 1–9. doi: 10.1080/02670844.2017.1421883
10.
WangZ, Low-cost and large-scale fabrication method for an environmentally-friendly superhydrophobic coating on magnesium alloy. J Mater Chem. 2012;22(9):4097–4105. doi: 10.1039/c2jm14475a
11.
MichelsA, Adjustable, (super) hydrophobicity by e-beam deposition of nanostructured PTFE on textured silicon surfaces. J Mater Sci. 2016;51(3):1316–1323. doi: 10.1007/s10853-015-9449-3
12.
TeisalaH, TuominenM, KuusipaloJ.Superhydrophobic coatings on cellulose-based materials: fabrication, properties, and applications. Adv Mater Interfaces. 2014;1(1. doi: 10.1002/admi.201300026
13.
SyedJA, TangS, MengX.Super-hydrophobic multilayer coatings with layer number tuned swapping in surface wettability and redox catalytic anti-corrosion application. Sci Rep. 2017;7(1):4403. doi: 10.1038/s41598-017-04651-3
14.
ViechineskiF, Preparation of transparent hydrophobic polymeric films spray-deposited on substrates. Surf Eng. 2018;34(2):121–127. doi: 10.1080/02670844.2016.1209623
15.
ShiY, XiaoX.Facile spray-coating for fabrication of superhydrophobic SiO2/PVDF nanocomposite coating on paper surface. J Dispers Sci Technol. 2016;37(5):640–645. doi: 10.1080/01932691.2015.1053145
16.
JamnaparaN, Al2O3 films grown by glow discharge plasma aluminising. Surf Eng. 2014;30(7):467–474. doi: 10.1179/1743294414Y.0000000267
17.
ChoB-H, The effect of plasma polymer coating using atmospheric-pressure glow discharge on the shear bond strength of composite resin to ceramic. J Mater Sci. 2011;46(8):2755–2763. doi: 10.1007/s10853-010-5149-1
18.
JafariM, Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method. Surf Eng. 2018;34(3):220–225. doi: 10.1080/02670844.2016.1259731
19.
YangY, Improvement of wear resistance for carburised steel by Ti depositing and plasma nitriding. Surf Eng. 2018;34(2):132–138. doi: 10.1080/02670844.2016.1231863
SabryRS, Al-MosawiMI.Novel approach to fabricate a stable superhydrophobic polycarbonate. Surf Eng. 2018;34(2):151–157. doi: 10.1080/02670844.2016.1270620
23.
LommatzschU, IhdeJ.Plasma polymerization of HMDSO with an atmospheric pressure plasma Jet for corrosion protection of aluminum and Low-adhesion surfaces. Plasma Processes Polym. 2009;6(10):642–648. doi: 10.1002/ppap.200900032
24.
DowlingDP, StallardCP.Achieving enhanced material finishing using cold plasma treatments. Transactions of the IMF. 2015;93(3):119–125. doi: 10.1179/0020296715Z.000000000240
25.
PulpytelJ, Deposition of organosilicon coatings by a non-equilibrium atmospheric pressure plasma jet: design, analysis and macroscopic scaling law of the process. Plasma Processes Polym. 2011;8(7):664–675. doi: 10.1002/ppap.201000121
26.
MiwaM, Effects of the surface roughness on sliding angles of water droplets on superhydrophobic surfaces. Langmuir. 2000;16(13):5754–5760. doi: 10.1021/la991660o
27.
MomenG, FarzanehM.Facile approach in the development of icephobic hierarchically textured coatings as corrosion barrier. Appl Surf Sci. 2014;299:41–46. doi: 10.1016/j.apsusc.2014.01.179
28.
ChenW, Ultrahydrophobic and ultralyophobic surfaces: some comments and examples. Langmuir. 1999;15(10):3395–3399. doi: 10.1021/la990074s
29.
KilicaslanA, Optical emission spectroscopy of microwave-plasmas at atmospheric pressure applied to the growth of organosilicon and organotitanium nanopowders. J Appl Phys. 2014;115(11):113301. doi: 10.1063/1.4868899
30.
JafariR, MobarakehLF, FarzanehM.Water-repellency enhancement of nanostructured plasma-polymerized HMDSO coatings using grey-based taguchi method. Nanosci Nanotechnol Lett. 2012;4(3):369–374. doi: 10.1166/nnl.2012.1325
31.
IntranuovoF, PECVD of fluorocarbon coatings from hexafluoropropylene oxide: glow vs. afterglow. Chem Vap Depos. 2009;15(4-6):95–100. doi: 10.1002/cvde.200806755
32.
ErbilHY, CansoyCE.Range of applicability of the wenzel and cassie- baxter equations for superhydrophobic surfaces. Langmuir. 2009;25(24):14135–14145. doi: 10.1021/la902098a
MomenG, FarzanehM.A ZnO-based nanocomposite coating with ultra water repellent properties. Appl Surf Sci. 2012;258(15):5723–5728. doi: 10.1016/j.apsusc.2012.02.074
35.
EsmaeilianF, Comparison of wetting models and geometrical analysis in describing the effect of cavity number, size, and position on apparent contact angle. J Adhes Sci Technol. 2017;31(12):1338–1347. doi: 10.1080/01694243.2016.1256633
36.
HaoJ-H, WangZ-J.Modeling cassie–baxter state on superhydrophobic surfaces. J Dispers Sci Technol. 2016;37(8):1208–1213. doi: 10.1080/01932691.2015.1089407
