In this study, we present a simple and inexpensive method for enhancing the robustness of aluminium-based superhydrophobic surfaces and identify a method for reliably evaluating the degradation of such surfaces. A superhydrophobic aluminium surface was prepared by a chemical etching and hydrophobic coating. Hydrophobized aluminium particles on the surface were then transferred to adhesive strips. Scanning electron microscopy and contact angle measurements were conducted before and after water-jet and mechanical abrasion tests to evaluate the robustness of the superhydrophobic surfaces. Following the tests, the advancing contact angle remained unchanged while the receding contact angle depended on the adhesive strength of the surface. The receding contact angle on the superhydrophobic adhesive strip was found to decrease at a reduced rate, as compared to the original superhydrophobic aluminium surface. The receding contact angle was also measured to increase with the adhesive strength of the strips, demonstrating better overall superhydrophobic performance.
RothsteinJP.Slip on superhydrophobic surfaces. Annu Rev Fluid Mech. 2010;42:89–109. doi: 10.1146/annurev-fluid-121108-145558
2.
QuéréD.Wetting and roughness. Annu Rev Mater Res. 2008;38:71–99. doi: 10.1146/annurev.matsci.38.060407.132434
3.
BarthlottW, NeinhuisC.Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta. 1997;202(1):1–8. doi: 10.1007/s004250050096
GenzerJ, EfimenkoK.Recent developments in superhydrophobic surfaces and their relevance to marine fouling: a review. Biofouling. 2006;22(5):339–360. doi: 10.1080/08927010600980223
6.
OuJ, PerotB, RothsteinJP.Laminar drag reduction in microchannels using ultrahydrophobic surfaces. Phys Fluids. 2004;16(12):4635–4643. doi: 10.1063/1.1812011
7.
DanielloRJ, WaterhouseNE, RothsteinJP.Drag reduction in turbulent flows over superhydrophobic surfaces. Phys Fluids. 2009;21(8):085103. doi: 10.1063/1.3207885
8.
ChoH, KimD, LeeC, A simple fabrication method for mechanically robust superhydrophobic surface by hierarchical aluminum hydroxide structures. Curr Appl Phys. 2013;13(4):762–767. doi: 10.1016/j.cap.2012.11.021
GuoZ, ZhouF, HaoJ, Effects of system parameters on making aluminum alloy lotus. J Colloid Interface Sci. 2006;303(1):298–305. doi: 10.1016/j.jcis.2006.06.067
11.
HuangY, SarkarDK, ChenXG.Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Appl Surf Sci. 2015;356(30):1012–1024. doi: 10.1016/j.apsusc.2015.08.166
12.
LiuY, LiuJ, LiS, Fabrication of biomimetic super-hydrophobic surface on aluminum alloy. J Mater Sci. 2014;49(4):1624–1629. doi: 10.1007/s10853-013-7845-0
13.
LomgaJ, VarshneyP, NandaD, Fabrication of durable and regenerable superhydrophobic coatings with excellent self-cleaning and anti-fogging properties for aluminium surfaces. J Alloys Compd. 2017;702(25):161–170. doi: 10.1016/j.jallcom.2017.01.243
14.
SaleemaN, SarkarDK, PaynterRW, Superhydrophobic aluminum alloy surfaces by a novel one-step process. ACS Appl Mater Interfaces. 2010;2(9):2500–2502. doi: 10.1021/am100563u
15.
VarshneyP, LomgaJ, GuptaPK, Durable and regenerable superhydrophobic coatings for aluminium surfaces with excellent self-cleaning and anti-fogging properties. Tribol Int. 2018;119:38–44. doi: 10.1016/j.triboint.2017.10.033
16.
WuR, ChaoG, JiangH, The superhydrophobic aluminum surface prepared by different methods. Mater Lett. 2015;142(1):176–179. doi: 10.1016/j.matlet.2014.12.007
17.
XieD, LiW.A novel simple approach to preparation of superhydrophobic surfaces of aluminum alloys. Appl Surf Sci. 2011;258(3):1004–1007. doi: 10.1016/j.apsusc.2011.07.104
18.
ZhengS, LiC, FuQ, Development of stable superhydrophobic coatings on aluminum surface for corrosion-resistant, self-cleaning, and anti-icing applications. Mater Des. 2016;93(5):261–270. doi: 10.1016/j.matdes.2015.12.155
19.
XiaoX, XieW, YeZ.Preparation of corrosion-resisting superhydrophobic surface on aluminium substrate. Surf Eng. 2018;35(5):411–417. doi: 10.1080/02670844.2018.1433775
20.
YuH-D, ZhangX-R, WanY-L, Superhydrophobic surface prepared by micromilling and grinding on aluminium alloy. Surf Eng. 2016;32(2):108–113. doi: 10.1179/1743294414Y.0000000405
21.
JinH, LiZ, WeiS, Corrosion resistance and dynamic anti-icing of superhydrophobic surface on ASW. Surf Eng. 2017;34(8):603–610. doi:10.1080/02670844.2017.1366098.
22.
HuangC, YeX, YangX, Preparation of a superhydrophobic aluminium alloy surface by UV laser. Surf Eng. 2017. doi:10.1080/02670844.2017.1395982.
23.
SaleemaN, SarkarDK, PaynterRW, A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications. Appl Surf Sci. 2012;261(15):742–748. doi: 10.1016/j.apsusc.2012.08.091
24.
AbubakreOK, MamakiUP, MurianaRA.Investigation of the quenching properties of selected media on 6061 aluminum alloy. J Miner Mater Charact Eng. 2009;8(4):303–315.
SchellenbergerF, EncinasN, VollmerD, How water advances on superhydrophobic surfaces. Phys Rev Lett. 2016;116:096101. doi: 10.1103/PhysRevLett.116.096101
27.
PaxsonAT, VaranasiKK.Self-similarity of contact line depinning from textured surfaces. Nat Commun. 2013;4:1492. doi: 10.1038/ncomms2482
28.
KimJ-H, RothsteinJP.Role of interface shape on the laminar flow through an array of superhydrophobic pillars. Microfluid Nanofluidics. 2017;21:78. doi: 10.1007/s10404-017-1914-7
29.
DufourR, BrunetP, HarnoisM, Zipping effect on omniphobic surfaces for controlled deposition of minute amounts of fluid or colloids. Small. 2012;8(8):1229–1236. doi: 10.1002/smll.201101895
