The influence of the elemental composition of CuZnSn coatings deposited by electrodeposition on the formation of the Cu2ZnSnSe4 crystal structure following a selenisation process was investigated using X-ray diffraction, scanning electron microscopy and Raman spectroscopy. This study showed that the optimum alloy ratio to achieve the Cu2ZnSnSe4 crystal without impurity phases was in the range of 0.37–0.50 for Cu/(Zn+Sn) and 2.5–4 for Zn/Sn.
AnanthojuB, SoniaFJ, KushwahaA, Improved structural and optical properties of Cu2ZnSnS 4 thin films via optimized potential in single bath electrodeposition. Electrochim Acta. 2014;137:154–163. doi:10.1016/j.electacta.2014.05.166.
2.
ChanCP, LamH, SuryaC.Preparation of Cu2ZnSnS4 films by electrodeposition using ionic liquids. Sol Energy Mater Sol Cells. 2010;94:207–211. doi:10.1016/j.solmat.2009.09.003.
3.
GuravKV, KimYK, ShinSW, Pulsed electrodeposition of Cu2ZnSnS4 thin films: effect of pulse potentials. Appl Surf Sci. 2015;334:192–196. doi:10.1016/j.apsusc.2014.09.079.
4.
MkawiEM, IbrahimK, AliMKM, Influence of triangle wave pulse on the properties of Cu 2ZnSnS4 thin films prepared by single step electrodeposition. Sol Energy Mater Sol Cells. 2014;130:91–98. doi:10.1016/j.solmat.2014.06.039.
5.
KatagiriH, JimboK, YamadaS, Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique. Appl Phys Express. 2008;1:0412011–0412012. doi:10.1143/APEX.1.041201.
6.
DelbosS.Kësterite thin films for photovoltaics : a review. EPJ Photovoltaics. 2012;3:35004. doi:10.1051/epjpv/2012008.
7.
JimboK, KimuraR, KamimuraT, Cu2ZnSnS4-type thin film solar cells using abundant materials. Thin Solid Films. 2007;515:5997–5999. doi:10.1016/j.tsf.2006.12.103.
8.
TanakaT, NagatomoT, KawasakiD, Preparation of Cu2ZnSnS4 thin films by hybrid sputtering. J Phys Chem Solids. 2005;66:1978–1981. doi:10.1016/j.jpcs.2005.09.037.
9.
OishiK, SaitoG, EbinaK, Growth of Cu2ZnSnS4 thin films on Si (100) substrates by multisource evaporation. Thin Solid Films. 2008;517:1449–1452. doi:10.1016/j.tsf.2008.09.056.
10.
MoriyaK, WatabeJ, TanakaK, Characterization of Cu2ZnSnS4 thin films prepared by photo-chemical deposition. Phys Status Solidi. 2006;3:2848–2852. doi:10.1002/pssc.200669588.
11.
PawarSM, PawarBS, GuravKV, Fabrication of Cu2ZnSnS4 thin film solar cell using single step electrodeposition method. Jpn J Appl Phys. 2012;51:10NC27. doi.org/10.1143/JJAP.51.10NC27.
12.
Kishore KumarYB, Suresh BabuG, Uday BhaskarP, Preparation and characterization of spray-deposited Cu2ZnSnS4 thin films. Sol Energy Mater Sol Cells. 2009;93:1230–1237. doi:10.1016/j.solmat.2009.01.011.
13.
SekiguchiK, TanakaK, MoriyaK, Epitaxial growth of Cu2ZnSnS4 thin films by pulsed laser deposition. Phys Status Solidi. 2006;3:2618–2621. doi:10.1002/pssc.200669603.
14.
LiuF, LiY, ZhangK, In situ growth of Cu2 ZnSnS4 thin films by reactive magnetron co-sputtering. Sol Energy Mater Sol Cells. 2010;94:2431–2434. doi:10.1016/j.solmat.2010.08.003.
15.
EmraniA, VasekarP, WestgateCR.Effects of sulfurization temperature on CZTS thin film solar cell performances. Sol Energy. 2013;98:335–340. doi:10.1016/j.solener.2013.09.020.
16.
SeptinaW, IkedaS, KyoraisekiA, Single-step electrodeposition of a microcrystalline Cu 2ZnSnSe4 thin film with a kesterite structure. Electrochim Acta. 2013;88:436–442. doi:10.1016/j.electacta.2012.10.076.
17.
ZengX, TaiKF, ZhangT, Cu2ZnSn(S,Se)4 kesterite solar cell with 5.1% efficiency using spray pyrolysis of aqueous precursor solution followed by selenization. Sol Energy Mater Sol Cells. 2014;124:55–60. doi:10.1016/j.solmat.2014.01.029.
18.
AhmedS, ReuterKB, GunawanO, A high efficiency electrodeposited Cu2ZnSnS4 solar cell. Adv Energy Mater. 2012;2:253–259. doi:10.1002/aenm.201100526.
19.
MárquezJ, NeuschitzerM, DimitrievskaM, Systematic compositional changes and their influence on lattice and optoelectronic properties of Cu2ZnSnSe4 kesterite solar cells. Sol Energy Mater Sol Cells. 2016;144:579–585. doi:10.1016/j.solmat.2015.10.004.
20.
SchurrR, HölzingA, JostS.The crystallisation of Cu2ZnSnS4 thin film solar cell absorbers from co-electroplated Cu–Zn–Sn precursors R. Thin Solid Films. 2009;517:2465–2468. doi:10.1016/j.tsf.2008.11.019.
21.
HsuWC, RepinsI, BeallC, The effect of Zn excess on kesterite solar cells. Sol Energy Mater Sol Cells. 2013;113:160–164. doi:10.1016/j.solmat.2013.02.015.
22.
KatagiriH, JimboK, TaharaM, The influence of the composition ratio on CZTS-based thin film solar cells. MRS Proc. 2009;1165:1165–M04–01. doi:10.1557/PROC-1165-M04-01.
23.
MengM, WanL, ZouP, Cu2ZnSnSe4 thin films prepared by selenization of one-step electrochemically deposited Cu-Zn-Sn-Se precursors. Appl Surf Sci. 2013;273:613–616. doi:10.1016/j.apsusc.2013.02.088.
