The Ti–SiC–ZrB2 cermet coatings were fabricated on Ti6Al4 V by laser cladding with a 4 kW continuous wave Rofin Sinar Nd:YAG laser system. Three compositions of the cermet coatings of varying percentages of ZrB2 (0 wt-%, 5 wt-% and 10 wt-%) were added. Scanning electron microscopy and energy dispersive spectroscopy were used to study the microstructure of the coatings while X-ray diffractometry was utilised to investigate the existing phases on the coatings. The microstructures of the coatings were majorly characterised by secondary precipitates of granular TiC and Ti5Si3 in β-Ti matrix. With the addition of ZrB2, new phases developed which were dispersed. This resulted in a corresponding increase in surface hardness where the resultant hardness values of the laser clad coatings were found to be approximately four times higher than Ti6Al4 V alloy.
WengF, ChenC, YuH.Research status of laser cladding on titanium and its alloys: a review. Mater Des. 2014;58:412–425. doi: 10.1016/j.matdes.2014.01.077
2.
El-LabbanH, MahmoudE, Al-WadaiH.Laser cladding of Ti-6AI-4 V alloy with vanadium carbide particles. Adv Prod Eng Manage. 2014;9:159.
3.
WengF, YuH, ChenC, Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4 V alloy. J Alloys Compd. 2017;692:989–996. doi: 10.1016/j.jallcom.2016.09.071
4.
WengF, YuH, ChenC, Microstructures and wear properties of laser cladding Co-based composite coatings on Ti–6Al–4 V. Mater Des. 2015;80:174–181. doi: 10.1016/j.matdes.2015.05.005
5.
ShishkovskyI, SmurovI.Titanium base functional graded coating via 3D laser cladding. Mater Lett. 2012;73:32–35. doi: 10.1016/j.matlet.2011.12.099
6.
FindikF.Latest progress on tribological properties of industrial materials. Mater Des. 2014;57:218–244. doi: 10.1016/j.matdes.2013.12.028
7.
AdesinaO, MthisiA, PopoolaA.The effect of laser based synthesized Ti-Co coating on microstructure and mechanical properties of Ti6al4v alloy. Procedia Manuf. 2017;7:46–52. doi: 10.1016/j.promfg.2016.12.014
8.
BaumannH, BethgeK, BilgerG, Thin hydroxyapatite surface layers on titanium produced by ion implantation. Nucl Instrum Methods Phys Res Sect B. 2002;196:286–292. doi: 10.1016/S0168-583X(02)01298-3
9.
KrischokS, BlankC, EngelM, Influence of ion implantation on titanium surfaces for medical applications. Surf Sci. 2007;601:3856–3860. doi: 10.1016/j.susc.2007.04.060
10.
MahmoudiB, TorkamanyM, AghdamASR, Laser surface hardening of AISI 420 stainless steel treated by pulsed Nd: YAG laser. Mater Design (1980–2015). 2010;31:2553–2560. doi: 10.1016/j.matdes.2009.11.034
11.
LiM-x, HeY-z, SunG-x.Laser cladding Co-based alloy/SiCp composite coatings on IF steel. Mater Des. 2004;25:355–358. doi: 10.1016/j.matdes.2003.08.006
12.
PopoolaA, OchonogorO, AbdulwahabM.Corrosion and hardness characteristics of laser surface modified Ti6Al4 V/Zr+ TiC and Ti6Al4 V/Ti+ TiC composites. Int J Electrochem Sci. 2013;8:2449–2458.
13.
JianingL, ChuanzhongC, LeiZ.Microstructure characteristics of Ti 3 Al/TiC ceramic layer deposited by laser cladding. Int J Refract Met Hard Mater. 2011;29:49–53. doi: 10.1016/j.ijrmhm.2010.07.001
14.
LinY, YaoJ, LeiY, Microstructure and properties of TiB 2–TiB reinforced titanium matrix composite coating by laser cladding. Opt Lasers Eng. 2016;86:216–227. doi: 10.1016/j.optlaseng.2016.06.013
15.
LiuY, DingJ, QuW, Microstructure evolution of TiC particles In situ, synthesized by laser cladding. Materials (Basel). 2017;10:281. doi: 10.3390/ma10030281
16.
MokgalakaMN, PityanaSL, PopoolaPAI, Niti intermetallic surface coatings by laser metal deposition for improving wear properties of Ti-6Al-4 V substrates. Adv Mater Sci Eng. 2014;2014:1–8. doi: 10.1155/2014/363917
17.
LiuY, LiJ, XuanF.Fabrication of TiC reinforced Ni based coating by laser cladding. Surf Eng. 2012;28:560–563. doi: 10.1179/1743294412Y.0000000026
18.
KaimingW, YulongL, HanguangF, A study of laser cladding NiCrBSi/Mo composite coatings. Surf Eng. 2018;34:267–275. doi: 10.1080/02670844.2016.1259096
19.
ZhangY, LiZ, NieP, Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating. Surf Eng. 2013;29:414–418. doi: 10.1179/1743294413Y.0000000142
20.
JagdheeshR, Kamachi MudaliU, SastikumarD, Laser cladding of Si on austenitic stainless steel. Surf Eng. 2005;21:113–118. doi: 10.1179/174329405X40885
21.
ClareA, OyelolaO, AbioyeT, Laser cladding of rail steel with Co–Cr. Surf Eng. 2013;29:731–736. doi: 10.1179/1743294412Y.0000000075
22.
ChenY, LiuD, LiF, WC p/Ti–6Al–4 V graded metal matrix composites layer produced by laser melt injection. Surf Coat Technol. 2008;202:4780–4787. doi: 10.1016/j.surfcoat.2008.04.057
23.
PeiY, OcelikV, De HossonJTM.Sic p/Ti6Al4 V functionally graded materials produced by laser melt injection. Acta Mater. 2002;50:2035–2051. doi: 10.1016/S1359-6454(02)00049-6
24.
YangY, YangZ, DongD, Wettability and biomineralisation of laser cladded Si doped TiCN biocoating. Mater Sci Technol. 2015;31:1417–1424. doi: 10.1179/1743284714Y.0000000717
25.
TedescoJL, RoweJ, NemanichRJ.Titanium silicide islands on atomically clean Si (100): identifying single electron tunneling effects. J Appl Phys. 2010;107:123715. doi: 10.1063/1.3437049
26.
FrommeyerG, RosenkranzR.Structures and properties of the refractory silicides Ti 5 Si 3 and TiSi 2 and Ti-Si-(Al) eutectic alloys. Metallic Mater High Struct Effic. 2004;146:287–308.
