To enhance the mechanical properties of Ni–WC coatings, the carbon nanotubes were used as reinforced materials by laser cladding. Optical microscopy (OM), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) were used to investigate the effect of CNTs content on the phase composition and microstructure. The microhardness and wear resistance were measured by Vickers hardness testing and friction wear testing. Experimental results showed that the new phases Cr2Fe14C are found in the coatings with CNTs, the grain size is finer than that of the coating without CNTs. The microhardness and wear resistance of the coatings with CNTs content ranging from 0 to 5 wt-% present increase initially and then decrease trend. The coatings with 3 wt-% CNTs have the highest microhardness and wear resistance, which proved that the appropriate amount of CNTs addition is 3 wt-%.
ZhangYC., LiZG, NiePL, Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating. Surf Eng. 2013;29;414–418. doi: 10.1179/1743294413Y.0000000142
2.
GopinathM, KarmakarDP, NathAK.In-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coating. J Alloy Compd. 2018;740;545–558. doi: 10.1016/j.jallcom.2017.12.364
3.
LiuYH, LiJ, XuanFZ.Fabrication of TiC reinforced Ni based coating by laser cladding. Surf Eng. 2012;28;560–563. doi: 10.1179/1743294412Y.0000000026
4.
KaimingW, YulongL, HanguangF, A study of laser cladding NiCrBSi/Mo composite coatings. Surf Eng. 2016;34:267–275. doi: 10.1080/02670844.2016.1259096
5.
ZhaiL, BanC, ZhangJ, Characteristics of dilution and microstructure in laser cladding Ni-Cr-B-Si coating assisted by electromagnetic compound field. Mater Lett. 2019; 243:195–198. doi: 10.1016/j.matlet.2019.01.133
6.
WengF, ZhaoLJ, YuHj, et al. Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti-6Al-4V alloy. J Alloy Compd. 2015;650;178–184. doi: 10.1016/j.jallcom.2015.07.295
7.
CaiY, LuoZ, FengM, The effect of TiC/Al2O3 composite ceramic reinforcement on tribological behavior of laser cladding Ni60 alloys coatings. Surf Coat Tech. 2016;291;222–229. doi: 10.1016/j.surfcoat.2016.02.033
8.
HanT, XiaoM, ZhangJ, Laser cladding composite coating on mild steel using Ni–Cr–Ti–B4C powder. Surf Eng. 2018: 1–7. doi:10.1080/02670844.2018.1534926.
9.
WangK, DuD, LiuG, Microstructure and properties of WC reinforced Ni-based composite coatings with Y2O3 addition on titanium alloy by laser cladding. Sci Technol Weld Joi. 2019;24:517–524. doi: 10.1080/13621718.2019.1580441
10.
ShuD, LiZ, YaoC, In situ synthesised WC reinforced nickel coating by laser cladding. Surf Eng. 2017;34(4):1–7.
11.
MohammedS, RajamureRS, ZhangZ, Tailoring corrosion resistance of laser-cladded Ni/WC surface by adding rare earth elements. Int J Adv Manuf Tech. 2018;97(9):4043–4054. doi: 10.1007/s00170-018-2227-z
12.
LiMY, HanB, WangY, Effects of La2O3 on the microstructure and property of laser cladding Ni-based ceramic coating. Optik. 2017;130;1032–1037. doi: 10.1016/j.ijleo.2016.11.111
13.
DeesomD, CharoenratK, MoonngamS, Fabrication and properties of NiCr/CNTs nanocomposite coatings prepared by high velocity oxy-fuel spraying. Surf Coat Tech. 2016;306:240–244. doi: 10.1016/j.surfcoat.2016.06.016
14.
KumarS, ArifU, KumarV, Evaluation of mechanical properties of Ti6Al4 V built by composite coating of WS2, CNT, Ni, and Ti6Al4 V powders through laser cladding process. Adv Micro Nano Manuf Surf Eng. 2019: 647–661. doi:10.1007/978-981-32-9425-7_58.
15.
RodríguezMA, GilL, CameroS, Effects of the dispersion time on the microstructure and wear resistance of WC/Co-CNTs HVOF sprayed coatings. Surf Coat Tech. 2014;258:38–48. doi: 10.1016/j.surfcoat.2014.10.014
16.
ChenY, ZhangQ, ChenZ.Study on the element segregation and laves phase formation in the carbon nanotubes reinforced IN718 superalloy by laser cladding. Powder Technol. 2019;355:163–171. doi: 10.1016/j.powtec.2019.07.063
ChenY, LuF, ZhangKe, Laser powder deposition of carbon nanotube reinforced nickel-based superalloy Inconel 718. Carbon N Y. 2016;107(2016):361–370. doi: 10.1016/j.carbon.2016.06.014
19.
SebastiánS, Ramos-MooreE, BjörnL, Grain growth analysis of multiwalled carbon nanotube-reinforced bulk Ni composites. Carbon N Y. 2014;70(2):173–178.
20.
LeiJ, ShiC, ZhouS, Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding. Surf Coat Tech. 2018;334:274–285. doi: 10.1016/j.surfcoat.2017.11.051
21.
DingL, HuS, QuanX, Effect of Mo and nano-Nd2O3 on the microstructure and wear resistance of laser cladding Ni-based alloy coatings. Appl Phys A. 2016;122(4pt.1):288.1–288.7.
PingXL, FuHG, SunST, Microstructure and performance of Nb-bearing Ni60A-Cr3C2 coatings manufactured by laser cladding. Surf Eng. 201911):1–13. doi:10.1080/02670844.2019.1631510.
24.
LiC, ZhangQ, WangF, Microstructure and wear behaviors of WC-Ni coatings fabricated by laser cladding under high frequency micro-vibration. Appl Surf Sci. 2019;485:513–519. doi: 10.1016/j.apsusc.2019.04.245
25.
AbioyeTE, FolkesJ, ClareAT, Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation. Surf Eng. 2013;29:647–653. doi: 10.1179/1743294412Y.0000000073
26.
ZhangY, HanT, XiaoM, Microstructure and properties of laser-clad FeNiCoCrTi0.5Nb0.5 high-entropy alloy coating. Mater Sci Tech. 2020;36:811–818. doi: 10.1080/02670836.2020.1743924
27.
RottwinkelB, NölkeC, KaierleS, Laser cladding for crack repair of CMSX-4 single-crystalline turbine parts. Lasers Manuf Mater Process. 2017;4:13–23. doi: 10.1007/s40516-016-0033-8
28.
BarrC, Da SunS, EastonM, . Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels. Surf Coat Tech. 2018;340;126–136. doi: 10.1016/j.surfcoat.2018.02.052
