Mixtures of Ni-based filler metal without and with 0.5, 1, and 2% WC nanoparticles (NPs) were methodologically tested in order to improve the wear behaviour of WC/Ni-based overlays deposited on low carbon steel by the plasma transferred arc (PTA) process. On adding 2% WC NPs, the longitudinal direction overlay microstructure was modified to have a fibrous appearance. The mechanism to improve WC particle distribution and thus prevent microcrack propagation in the overlays implies a liquid-phase viscosity change. Results of pin-on-disk tests in the overlay using filler metal with 2% WC NPs show that the combined effect of fibrous microstructure and W-rich phases in the overlay, decreases the volume loss by 76% and 78% in comparison with overlays without WC NPs for a 1 and 5 N load, respectively. These outcomes might be of interest for the mining industry, where machinery and equipment are exposed to extreme wear conditions.
BadischE, KirchgaßnerM. Influence of welding parameters on microstructure and wear behaviour of a typical NiCrBSi hardfacing alloy reinforced with tungsten carbide. Surf Coat Technol. 2008;202(24):6016–6022. doi: 10.1016/j.surfcoat.2008.06.185
DengD, ZhangL, NiuT, Microstructures and wear performance of PTAW deposited Ni-based coatings with spherical tungsten carbide. Metals (Basel). 2015;5(4):1984–1996. doi: 10.3390/met5041984
4.
JonesM, WaagU. The influence of carbide dissolution on the erosion–corrosion properties of cast tungsten carbide/Ni-based PTAW overlays. Wear. 2011;271(9–10):1314–1324. doi: 10.1016/j.wear.2011.01.046
5.
Gui-RongY, Chao-PengH, Wen-MingS, Microstructure characteristics of Ni/WC composite cladding coatings. Inter J Miner Metall Mater. 2016;23(2):184–192. doi: 10.1007/s12613-016-1226-z
6.
JanickiD, StaszukMM. Direct diode laser cladding of inconel 625/WC composite coatings. J Mech Eng. 2016;62(6):363–372. doi: 10.5545/sv-jme.2015.3194
7.
MehrjouRS, SohiMH, TorkamanyMJ, Laser surface treatment of AZ91 magnesium alloy presprayed with WC–Co. Surf Eng. 2016;32(12):893–901. doi: 10.1179/1743294415Y.0000000108
8.
JankauskasV, AntonovM, VarnauskasV, Effect of WC grain size and content on low stress abrasive wear of manual arc welded hardfacings with low-carbon or stainless steel matrix. Wear. 2015;328–329:378–390. doi: 10.1016/j.wear.2015.02.063
BeneaL, DanailaE, CelisJ. Influence of electro-co-deposition parameters on nano-TiO2 inclusion into nickel matrix and properties characterization of nanocomposite coatings obtained. Mater Sci Eng A. 2014;610:106–115. doi: 10.1016/j.msea.2014.05.028
11.
FernandesF, RamalhoL, GuilemanyJM, Influence of nanostructured ZrO2 additions on the wear resistance of Ni-based alloy coatings deposited by APS process. Wear. 2013;303(1–2):591–601. doi: 10.1016/j.wear.2013.04.012
12.
BeneaL, BaşaS-B, DănăilăE, Fretting and wear behaviors of Ni/nano-WC composite coatings in dry and wet conditions. Mater Des. 2015;65:550–558. doi: 10.1016/j.matdes.2014.09.050
13.
FarahmandP, LiuS, ZhangZ, Laser cladding assisted by induction heating of Ni–WC composite enhanced by nano-WC and La2O3. Ceram Int. 2014;40(10):15421–15438. doi: 10.1016/j.ceramint.2014.06.097
14.
FarahmandP, KovacevicR. Corrosion and wear behavior of laser cladded Ni – WC coatings. Surf Coat Technol. 2015;276:121–135. doi: 10.1016/j.surfcoat.2015.06.039
15.
DongS, BeakeBD, ParkinsonR, Determination of hardness and young's modulus of brush plated nano-Al2O3/Ni composite coating by nanoindentation testing. Surf Eng. 2003;19(3):195–199. doi: 10.1179/026708403225006168
16.
KatsichC, BadischE. Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions. Surf Coat Technol. 2011;206:1062–1068. doi: 10.1016/j.surfcoat.2011.07.064
17.
LiyanageT, FisherG, GerlichAP. Microstructures and abrasive wear performance of PTAW deposited Ni-WC overlays using different Ni-alloy chemistries. Wear. 2012;274–275:345–354. doi: 10.1016/j.wear.2011.10.001
18.
GurumoorthyK, KamarajM, RaoKP, Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy. Mater Sci Eng A. 2007;456(1–2):11–19. doi: 10.1016/j.msea.2006.12.121
19.
AlmeidaVB, TakanoEH, MazzaroI, Evaluation of Ni–Al coatings processed by plasma transferred arc. Surf Eng. 2011;27(4):266–271.
20.
PoirierDR, GeigerGH. Transport phenomena in materials processing. Warrendale (PA)
: The Minerals, Metals and Materials Society; 1994.
21.
WangLY, TuJP, ChenWX, Friction and wear behavior of electroless Ni-based CNT composite coatings. Wear. 2003;254:1289–1293. doi: 10.1016/S0043-1648(03)00171-6
22.
ChenWX, TuJP, WangLY, Tribological application of carbon nanotubes in a metal-based composite coating and composites. Carbon. 2003;41:215–222. doi: 10.1016/S0008-6223(02)00265-8
23.
HiranoSI, TajimaS. Synthesis and magnetic properties of Fe5C2 by reaction of iron oxide and carbon monoxide. J Mater Sci. 1990;25:4457–4461. doi: 10.1007/BF00581108
24.
Xiu-BoL, GangY, JianG, Research on laser welding of cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft. J Alloys Compd. 2008;453:371–378. doi: 10.1016/j.jallcom.2006.11.152
25.
BurovVG, BataevIA, TyurinAG, Structure and properties of WC–Co coatings obtained on steel substrates by liquid state sintering in vacuum. Surf Eng. 2015;31(7):540–544. doi: 10.1179/1743294414Y.0000000415
26.
HouQY, HuangZ, WangJT. Influence of nano-Al2O3 particles on the microstructure and wear resistance of the nickel-based alloy coating deposited by plasma transferred arc overlay welding. Surf Coat Technol. 2011;205(8–9):2806–2812. doi: 10.1016/j.surfcoat.2010.10.047
27.
HalsteadA, RawlingsRD. The fracture behavior of two Co-Mo-Cr-Si wear resistant alloys (“Tribaloys”). J Mater Sci. 1985;20(4):1248–1256. doi: 10.1007/BF01026320
28.
Kumar-KatiyarP, Kumar-SinghP, SinghR, Modes of failure of cemented tungsten carbide tool bits (WC/Co): a study of wear parts. Int J Refrac Met H Mater. 2016;54:27–38. doi: 10.1016/j.ijrmhm.2015.06.018
