Electrochemical preparation of tungsten,tungsten carbide and cemented tungsten carbide

Abstract

Tungsten is conventionally made by the reduction of tungsten oxide with hydrogen, tungsten carbide by the reaction of tungsten with carbon and cemented tungsten carbide by the sintering together of tungsten carbide with a metal, usually cobalt. This paper reports the electrochemical preparation of tungsten, tungsten carbide and cemented tungsten carbide starting with calcium tungstate, carbon and cobalt oxide, depending upon the desired end product. The starting materials were mixed and pelletised, and the pellets then made the cathode in a calcium chloride based melt. On the application of a modest potential (∼3 V), the calcium tungstate was reduced to tungsten, the mixture of calcium tungstate and carbon to nanosized tungsten carbide and the mixture of calcium tungstate, cobalt oxide and carbon to cemented tungsten carbide, all in ∼1 h. The products were characterised and the reaction path determined.

Keywords

Tungsten Tungsten carbide Cemented tungsten carbide Electro-deoxidation

Get full access to this article

View all access options for this article.

References

Abdelkader,

A. M.

, Hyslop,

D. J. S.

, Cox,

and Fray,

D. J.

. 2010. Electrochemical synthesis and characterisation of a NdCo₅ permanent magnet, J. Mater. Chem., 20, 6039–6049.

Bhagat,

, Dye,

, Raghunathan,

S. L.

, Talling,

R. J.

and Inman,

. 2010. In situ synchrotron diffraction of the electrochemical reduction pathway of TiO₂, Acta Mater., 58, 5057–5062.

Bhagat,

, Jackson,

, Inman,

and Dashwood,

. 2009. Production of Ti-W alloys from mixed oxide precursors via the FFC Cambridge Process, J. Electrochem. Soc., 156, E1–E7.

Bhagat,

, Jackson,

, Inman,

and Dashwood,

., 2008. The production of Ti-Mo alloys from mixed oxide precursors via the FFC Cambridge Process, J. Electrochem. Soc., 155, E63–E69.

Brady,

C. D. A.

, Rees,

E. J.

and Burstein,

G. T.

. 2008. Electrocatalysis by nanocrystalline tungsten carbides and the effects of codeposited silver. J. Power Sources., 179, 17–26.

Chen,

G. Z.

, Fray,

D. J.

and Farthing,

T. W.

. 2000. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride, Nature, 407, 361–364.

Erdogan,

and Karakaya,

. 2010. Electrochemical reduction of tungsten compounds to produce tungsten powder, Met. Mat. Trans. A, 41, 798–804.

Eso,

, Fang,

Z. Z.

and Griffo,

. 2006. Kinetics of cobalt gradient formation during the liquid phase sintering of functionally graded WC-Co, Int. J. Refract. Hard. Met., 25, 286–292.

Gusev,

A. I.

and Kurlov,

A. S.

. 2007. Ordering of the lowest tungsten carbide W₂C, Jetp Lett., 85, 34–39.

10.

Habashi,

(ed.) 1997. Handbook of extractive metallurgy, Weinheim, Wiley-VCH.

11.

Kurlov,

A. S.

and Gusev,

A. I.

. 2006. Tungsten carbides and W-C diagram, Inorg. Mater., 42, 121–127.

12.

Levy,

R. B.

and Boudart,

. 1973. Platinum-like behaviour of tungsten carbide in surface catalysis, Science, 181, 547–549.

13.

Packter,

and Roy,

B. N.

. 1971. The crystallization of alkaline earth metal tungstates (molybdates, chromates and sulphates) from metal chloride melts, Kristall. Technik., 6, 39–51.

14.

Peng,

J. J.

, Li,

G. M.

, Chen,

H. L.

, Wang,

D. H.

, Jin,

X. B.

and Chen,

G. Z.

. 2008. Electrochemical conversion of oxide precursors to consolidated Zr and Zr-2·5Nb tubes, Chem. Mater., 20, 7274–7280.

15.

Qiu,

G. H.

, Wang,

D. H.

, Ma,

, Jin,

X. B.

and Chen,

G. Z.

. 2006. Electrolytic synthesis of TbFe₂ from Tb₄O₇ and Fe₂O₃ powders in molten CaCl₂, J. Electroanal. Chem., 589, 139–147.

16.

Rees,

E. J.

, Essaki,

, Brady,

C. D. A.

and Burstein,

G. T.

. 2009. J. Power Sour., 188, 75–81.

17.

Rautela,

and Norton,

J. T.

. 1952. Tungsten-cobalt-carbon system, J. Met., 4, 1045–1050.

18.

Sacks,

. 2011. Uncle tungsten: memories of a chemical boyhood, Alfred A. Knopp, London, Pan-Macmillan Ltd.

19.

Schubert,

W. D.

, Bock,

and Lux,

. 1995. General aspects and limits of conventional ultrafine WC powder manufacture and hard metal production, Int. J. Refract. Metals Hard Met., 13, 281–296.

20.

Schwandt,

, Alexander,

D. T. L.

and Fray,

D. J.

. 2009. The electro-doxidation of porous titanium dioxide precursors in molten calcium chloride under cathodic potential control, Electrochem. Acta, 54, 3819–3829.

21.

Song,

Q.-S

, Xu,

, Kong,

, Du,

J.-H.

and Xi,

Z.-P.

2010. Mechanistic insight of electrochemical reduction of Ta₂O₅ to tantalum in a eutectic CaCl₂-NaCl molten salt, J. Alloy. Compd, 490, 241–246.

22.

Schubert,

W.-D.

, Lassner,

and Bohlke,

. 2010. Cemented carbides – a success story, (ed. Maby,

), London, International Industry Association.

23.

Upadhyaya,

G. S.

. 1998. Cemented tungsten carbides: production, properties and applications, Bracknell, Noyes Publications.

24.

Wyman,

L. L.

and Kelley,

F. C.

. 1931. Cemented tungsten carbide, a study of the action of cementing material, Trans. AIME, 93, 208–229.

25.

Yan,

X. Y.

and Fray,

D. J.

. 2005. Electrosynthesis of NbTi and Nb₃Sn superconductors from oxide precursors in CaCl₂-based melts, Adv. Funct. Mater., 15, 1757–1761.

26.

Yan,

X. Y.

and Fray,

D. J.

. 2002, Production of niobium powder by direct electrochemical reduction of solid Nb₂O₅ in a eutectic CaCl₂-NaCl melt. Metall. Mater. Trans. B, 33B, 685–693.

27.

Zhu,

, Meng,

M. A.

and Wang,

D. H.

. 2006. Electrolytic reduction of mixed solid oxides for energy efficient production of the TiNi alloy, Chin. Sci. Bull., 51, 2535–2540.