Advanced AlCrSiN and AlTiSiN coatings were deposited on high-speed steel by cathodic vacuum arc. The microstructures, mechanical and tribological properties were studied, as well as cutting performance. The results show that multilayered AlCrSiN coating mainly consists of nanocrystalline fcc-AlCrN and a few amorphous Si3N4 phases, with an average module period of about 6.0 nm. While the AlTiSiN coating reveals nano-composite structure consisted of nanocrystalline fcc-AlTiN and hcp-AlN embedded into Si3N4 amorphous matrix. The AlCrSiN-coated tool reveals a more excellent cutting performance when compared with the AlTiSiN-coated tool due to its higher hardness, adhesion strength, H3/E*2 ratio and wear resistance when compared with the AlTiSiN coating.
FerreiraF, OliveiraJC, CavaleiroA. CrN thin films deposited by HiPIMS in DOMS mode. Surf Coat Technol.2016;291:365–375. doi: 10.1016/j.surfcoat.2016.02.064
2.
PodgornikB, SedlacekM, MandrinoD. Performance of CrN coatings under boundary lubrication. Tribol Int.2016;96:247–257. doi: 10.1016/j.triboint.2015.12.039
3.
Martínez-MartínezD, López-CartesC, FernandezA, Exploring the benefits of depositing hard TiN thin films by non-reactive magnetron sputtering. Appl Surf Sci.2013;275:121–126. doi: 10.1016/j.apsusc.2013.01.098
4.
MayrhoferPH, MittererC, HultmanL, Microstructure design of hard coatings. Prog Mater Sci.2006;51:1032–1114. doi: 10.1016/j.pmatsci.2006.02.002
ChenWL, ZhengJ, MengXN, Investigation on microstructures and mechanical properties of AlCrN coatings deposited on the surface of plasma nitrocarburized cool-work tool steels. Vacuum. 2015;121:194–201. doi: 10.1016/j.vacuum.2015.08.021
7.
MiletićA, PanjianP, ŠkorićB, Microstructure and mechanical properties of nanostructured Ti-Al-Si-N coatings deposited by magnetron sputtering. Surf Coat Technol.2014;241:105–111. doi: 10.1016/j.surfcoat.2013.10.050
8.
LiuZQ, AnQL, XuJY, Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions. Wear. 2013;305:249–259. doi: 10.1016/j.wear.2013.02.001
9.
XuYX, ChenL, PeiF, Structure and thermal properties of TiAlN/CrN multilayered coatings with various modulation ratios. Surf Coat Technol.2016;304:512–518. doi: 10.1016/j.surfcoat.2016.07.055
ChuX, BarnettSA. Model of superlattice yield stress and hardness enhancements. J Appl Phys.1995;77:4403–4411. DOI:10.1063/1.359467.
13.
ChangCC, ChenHW, LeeJW, Development of Si-modified CrAlSiN nanocomposite coating for anti-wear application in extreme environment. Surf Coat Technol.2015;284:273–280. doi: 10.1016/j.surfcoat.2015.06.090
14.
VermaN, CadambiS, JayaramV, Micromechanisms of damage nucleation during contact deformation of columnar multilayer nitride coatings. Acta Mater.2012;60:3063–3073. doi: 10.1016/j.actamat.2012.02.011
15.
LeeDB, NguyenTD, KimSK. Air-oxidation of nano-multilayered CrAlSiN thin films between 800 and 1000°C. Surf Coat Technol.2009;203:1199–1204. doi: 10.1016/j.surfcoat.2008.10.011
16.
ZhangSH, WuWW, ChenWL, Structural optimization and synthesis of multilayers and nanocomposite AlCrTiSiN coatings for excellent machinability. Surf Coat Technol.2015;277:23–29. doi: 10.1016/j.surfcoat.2015.07.033
17.
ChenWL, LinY, ZhengJ, Preparation and characterization of CrAlN/TiAlSiN nano-multilayers by cathodic vacuum arc. Surf Coat Technol.2015;265:205–211. doi: 10.1016/j.surfcoat.2015.01.023
ChenWL, ZhengJ, LinY, Comparison of AlCrN and AlCrTiSiN coatings deposited on the surface of plasma nitrocarburized high carbon steels. Appl Surf Sci.2015;332:525–532. doi: 10.1016/j.apsusc.2015.01.212
20.
MusilJ, JiroutM. Toughness of hard nanostructured ceramic thin films. Surf Coat Technol.2007;201:5148–5152. DOI:10.1016/j.surfcoat.2006.07.020.
21.
EndrinoJL, PalacínS, AguirreMH, Determination of the local environment of silicon and the microstructure of quaternary CrAl(Si)N films. Acta Mater.2007;55:2129–2135. doi: 10.1016/j.actamat.2006.11.014
22.
ChenWL, WuCL, LiuZR, Phase transformations in the nitrocarburizing surface of carbon steels revisited by microstructure and property characterizations. Acta Mater.2013;61:3963–3972. doi: 10.1016/j.actamat.2013.02.058
23.
VepǐekS, NesládekP, NiederhoferA, Recent progress in the superhard nanocrystalline composites: towards their industrialization and understanding of the origin of the superhardness. Surf Coat Technol.1998;108–109:138–147. doi: 10.1016/S0257-8972(98)00618-5
24.
ZhengYJ, ZhangSH, WuP, Microstructures and mechanical properties of duplex-treated composite ceramics coatings with and without compound layer. Ceram Int.2015;41:2519–2526. doi: 10.1016/j.ceramint.2014.10.074
25.
AslantasK, HopaHE, PerinM, Cutting performance of nano-crystalline diamond (NCD) coating in micro-milling of Ti6Al4V alloy. Precision Eng.2016;45:55–66. doi: 10.1016/j.precisioneng.2016.01.009
26.
WangQZ, ZhouF, WangXN, Comparison of tribological properties of CrN, TiCN and TiAlN coatings sliding against SiC balls in water. Appl Surf Sci.2011;257:7813–7820. doi: 10.1016/j.apsusc.2011.04.035
27.
ZhangRF, VeprekS. Metastable phases and spinodal decomposition in Ti1-xAlxN system studied by ab initio and thermodynamic modeling, a comparison with the TiN-Si3N4 system. Mater Sci Eng A. 2007;448:111–119. DOI:10.1016/j.msea.2006.10.012.
28.
ZhangRF, VeprekS. Phase stabilities and spinodal decomposition in the Cr1-xAlxN system studied by ab initio LDA and thermodynamic modeling: Comparison with the Ti1-xAlxN and TiN/Si3N4 systems. Acta Mater.2007;55:4615–4624. doi: 10.1016/j.actamat.2007.04.029
29.
Thermochemical Data of Pure Substances. VCH Verlagsgesellschaft mbH. D-69451 Weinheim 1995.
