In this study, a low-temperature salt bath nitrocarburising method was used to modify the surface of AISI 316 stainless steel. The results showed that nitrogen and carbon atoms were coinstantaneously diffused into the austenite lattice during the nitrocarburising treatment. A supersaturated solid solution with nitrogen and carbon atoms, which has a face centre tetragonal structure, was formed. Moreover, the surface hardness of salt bath nitrocarburised AISI 316 reached 900 HV0.05 which was four times the hardness of the untreated sample. By adjusting treating time and treating temperature, both the surface hardness and the corrosion resistance of the stainless steel were enhanced. Overall, a nitrocarburised layer having the advantages of high hardness, favourable hardness gradient and excellent corrosion resistance was obtained on AISI 316 stainless steel surface by using low-temperature salt bath nitrocarburising.
RossoniEMM, GaylardeCC.Comparison of sodium hypochlorite and peracetic acid as sanitising agents for stainless steel food processing surfaces using epifluorescence microscopy. Int J Food Microbiol. 2000;61(1):81–85. doi: 10.1016/S0168-1605(00)00369-X
ValerianoC, de OliveiraTLC, de CarvalhoSM, CardosoMG, AlvesE, PiccoliRH.The sanitizing action of essential oil-based solutions against Salmonella enterica serotype Enteritidis S64 biofilm formation on AISI 304 stainless steel. Food Control. 2012;25(2):673–677. doi: 10.1016/j.foodcont.2011.12.015
4.
Sharifi GolruS, AttarMM, RamezanzadehB.Effects of surface treatment of aluminium alloy 1050 on the adhesion and anticorrosion properties of the epoxy coating. Appl Surf Sci. 2015;345:360–368. doi: 10.1016/j.apsusc.2015.03.148
5.
KaliszM, GrobelnyM, MazurM, WojcieszakD, ŚwiniarskiM, ZdrojekM, DomaradzkiJ, KaczmarekD.Mechanical and electrochemical properties of Nb2O5, Nb2O5:Cu and graphene layers deposited on titanium alloy (Ti6Al4V). Surf Coat Technol. 2015;271:92–99. doi: 10.1016/j.surfcoat.2015.01.002
6.
CaballeroYT, RondónEA, RuedaL, BarriosCAH, CoyA, ViejoF.Corrosion resistance of multilayer hybrid sol-gel coatings deposited on the AISI 316L austenitic stainless steel. J Phys Conf Series. 2016;687(1):012014. doi: 10.1088/1742-6596/687/1/012014
7.
BagherifardS, HickeyDJ, de LucaAC, MalheiroVN, MarkakiAE, GuaglianoM, WebsterTJ.The influence of nanostructured features on bacterial adhesion and bone cell functions on severely shot peened 316L stainless steel. Biomaterials. 2015;73:185–197. doi: 10.1016/j.biomaterials.2015.09.019
8.
OkazakiY, GotohE.Metal release from stainless steel, CoCrMoNiFe and NiTi alloys in vascular implants. Corros Sci. 2008;50(12):3429–3438. doi: 10.1016/j.corsci.2008.09.002
9.
ChengZ, LiCX, DongH, BellT.Low temperature plasma nitrocarburising of AISI 316 austenitic stainless steel. Surf Coat Technol. 2005;191(2–3):195–200. doi: 10.1016/j.surfcoat.2004.03.004
10.
LiangW.Surface modification of AISI 304 austenitic stainless steel by plasma nitriding. Appl Surf Sci. 2003;211(1–4):308–314. doi: 10.1016/S0169-4332(03)00260-5
11.
LiCX, BellT.Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steel. Wear. 2004;256(11–12):1144–1152. doi: 10.1016/j.wear.2003.07.006
12.
CaoY, ErnstF, MichalGM.Colossal carbon supersaturation in austenitic stainless steels carburized at low temperature. Acta Mater. 2003;51(14):4171–4181. doi: 10.1016/S1359-6454(03)00235-0
13.
ErnstF, CaoY, MichalGM, HeuerAH.Carbide precipitation in austenitic stainless steel carburized at low temperature. Acta Mater. 2007;55(6):1895–1906. doi: 10.1016/j.actamat.2006.09.049
14.
ChenF-S, ChangC-N.Effect of CH4 addition on plasma nitrocarburizing of austenitic stainless steel. Surf Coat Technol. 2003;173(1):9–18. doi: 10.1016/S0257-8972(02)00842-3
15.
LeeI.The effect of molybdenum on the characteristics of surface layers of low temperature plasma nitrocarburized austenitic stainless steel. Curr Appl Phys. 2009;9(3, Suppl):S257–S261. doi: 10.1016/j.cap.2009.01.030
16.
YuZ, XuX, WangL, QiangJ, HeiZ.Structural characteristics of low-temperature plasma-nitrided layers on AISI 304 stainless steel with an α′-martensite layer. Surf Coat Technol. 2002;153(2–3):125–130. doi: 10.1016/S0257-8972(01)01670-X
17.
ZhangZL, BellT.Structure and corrosion resistance of plasma nitrided stainless steel. Surf Eng. 1985;1(2):131–136. doi: 10.1179/sur.1985.1.2.131
18.
LeiMK, ZhangZL.Microstructure and corrosion resistance of plasma source ion nitrided austenitic stainless steel. J Vacuum Sci Technol A. 1997;15(2):421–427. doi: 10.1116/1.580501
19.
CeschiniL, MinakG.Fatigue behaviour of low temperature carburised AISI 316L austenitic stainless steel. Surf Coat Technol. 2008;202(9):1778–1784. doi: 10.1016/j.surfcoat.2007.07.066
20.
BottoliF, WintherG, ChristiansenTL, SomersMA.Influence of plastic deformation on low-temperature surface hardening of austenitic stainless steel by gaseous nitriding. Metall Mater Trans A. 2015;46(6):2579–2590. doi: 10.1007/s11661-015-2832-5
BorgioliF, GalvanettoE, BacciT.Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels. Mater Charact. 2014;95:278–284. doi: 10.1016/j.matchar.2014.07.006
23.
HatadaR, FlegeS, BobrichA, EnsingerW, BabaK.Surface modification and corrosion properties of implanted and DLC coated stainless steel by plasma based ion implantation and deposition. Surf Coat Technol. 2014;256:23–29. doi: 10.1016/j.surfcoat.2013.11.051
24.
LiY, WangZ, WangL.Surface properties of nitrided layer on AISI 316L austenitic stainless steel produced by high temperature plasma nitriding in short time. Appl Surf Sci. 2014;298:243–250. doi: 10.1016/j.apsusc.2014.01.177
WangJ, LinY, YanJ, ZenD, ZhangQ, HuangR, FanH.Influence of time on the microstructure of AISI 321 austenitic stainless steel in salt bath nitriding. Surf Coat Technol. 2012;206(15):3399–3404. doi: 10.1016/j.surfcoat.2012.01.063
28.
LuoHS, ZhaoC.Low temperature salt bath hardening of AISI 201 austenitic stainless steel. Phys Proc. 2013;50:38–42. doi: 10.1016/j.phpro.2013.11.008
29.
StraffordKN.Surface engineering: processes and applications'; 1994, Lancaster, Taylor & Francis.
30.
AllensteinAN, LepienskiCM, BuschinelliAJA, BrunattoSF.Plasma nitriding using high H2 content gas mixtures for a cavitation erosion resistant steel. Appl Surf Sci. 2013;277:15–24. doi: 10.1016/j.apsusc.2013.03.055
31.
ChoKT, SongK, OhSH, LeeY-K, LeeWB.Enhanced surface hardening of AISI D2 steel by atomic attrition during ion nitriding. Surf Coat Technol. 2014;251:115–121. doi: 10.1016/j.surfcoat.2014.04.011
32.
LiW, LiX, DongH.Effect of tensile stress on the formation of S-phase during low-temperature plasma carburizing of 316L foil. Acta Mater. 2011;59(14):5765–5774. doi: 10.1016/j.actamat.2011.05.053
33.
EgawaM, UedaN, NakataK, TsujikawaM, TanakaM.Effect of additive alloying element on plasma nitriding and carburizing behavior for austenitic stainless steels. Surf Coat Technol. 2010;205(Suppl 1):S246–S251. doi: 10.1016/j.surfcoat.2010.07.093
34.
WangJ, XiongJ, PengQ, FanH, WangY, LiG, ShenB.Effects of DC plasma nitriding parameters on microstructure and properties of 304L stainless steel. Mater Charact. 2009;60(3):197–203. doi: 10.1016/j.matchar.2008.08.011
35.
SunY.Enhancement in corrosion resistance of austenitic stainless steels by surface alloying with nitrogen and carbon. Mater Lett. 2005;59(27):3410–3413. doi: 10.1016/j.matlet.2005.06.005
36.
LiCX, BellT.Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel. Corros Sci. 2004;46(6):1527–1547. doi: 10.1016/j.corsci.2003.09.015
37.
FernandesF, HeckS, PereiraR, Lombardi-NetoA, TottenG, CastelettiL.Wear of plasma nitrided and nitrocarburized AISI 316L austenitic stainless steel. J Achiev Mater Manuf. Eng. 2010;40(2):175–179.
38.
ThaiwatthanaS, LiXY, DongH, BellT.Comparison studies on properties of nitrogen and carbon S phase on low temperature plasma alloyed AISI 316 stainless steel. Surf Eng. 2002;18(6):433–437. doi: 10.1179/026708402225010083
