Phosphate ion containing acidic polyphenol coating solutions were developed as to mitigate the deleterious effect of corrosion on galvannealed iron surface. The influence of manganese sulphate, manganese phosphate and polyethylene wax in polyphenol coatings were investigated to reduce the powdering of complex-shaped galvannealed structures and corrosion effect. Moreover, the reactivity of coating at the surface was evaluated by glow discharge optical emission spectroscopy, scanning electron microscopy and energy dispersive spectroscopy. Low surface integration within 3.5% NaCl environment and frictional behaviour was achieved with 0.5% manganese phosphate in polyphenol coated coupon by electrochemical and mechanical testing respectively.
Van EijnsbergenJ. F. H.: ‘Duplex systems, hot-dip galvanizing plus painting’, 2012, Netherlands
, Elsevier.
2.
EdavanR. P. and KopinskiR.: ‘Corrosion resistance of painted zinc alloy coated steels’, Corr. Sci., 2009, 51, (10), 2429–2442. doi: 10.1016/j.corsci.2009.06.028
3.
MarderA. R.: ‘The metallurgy of zinc-coated steel’, Progress. Mater. Sci., 2000, 45, (3), 191–271. doi: 10.1016/S0079-6425(98)00006-1
4.
PandeyJ. C.: ‘Study of recrystallization in interstitial free (IF) steel by ultrasonic techniques’, Mat. Man
. Proc., 2011, 26, 147–153.
5.
CookD. C., TuszynskiR. S. and TownsendH. E.: ‘Zinc-iron phases formed on galvannealed steel’, Hyper. Inter., 1990, 54, (1–4), 781–785. doi: 10.1007/BF02396128
6.
WienströerS., FransenM., MittelstädtH., NazikkolC. and VölkerM.: ‘Zinc/Iron phase transformation studies on galvannealed steel coatings by X-ray diffraction’, Int. Centre Diffraction Data, 2003, 46, 291–296.
7.
CapelossiV. R. and AokiI. V.: ‘Influence of sonication on anticorrosion properties of a sulfursilane film dopped with Ce (IV) on galvannealed steel’, Prog. Org. Coat., 2013, 76, (5), 812–820. doi: 10.1016/j.porgcoat.2013.01.012
8.
QueirozF. M. and CostaI.: ‘Electrochemical, chemical and morphological characterization of galvannealed steel coating’, Surf. Coat. Technol., 2007, 201, (16), 7024–7035. doi: 10.1016/j.surfcoat.2007.01.005
9.
KoniecznyA. A.: ‘On formability assessment of the automotive dual phase steels’, SAE Int. Proc., 2001, 110, 1023–1028.
Sankara NarayananT. S. N.: ‘Surface pretreatment by phosphate conversion coatings-A review’, Rev. Adv. Mater. Sci., 2005, 9, 130–177.
12.
SuzukiI.: ‘Corrosion resistant coatings technology’, 167; 1989, New York
, Marcel Dekker, Inc.
13.
FangJ., WongP. C., MitchellK. A. R., FosterT.: ‘Observations related to the phosphating of aluminium alloy 7075-T6 using a spraying technique’, J. Mater. Sci., 1998, 33, (6), 1541–1547. doi: 10.1023/A:1017507602553
14.
KumarP., JohnA. and Kingsly Jeba SinghD.: ‘Sliding wear analysis on A390 aluminium nanocoated with sol-gel-synthesized particles for bearing’, Int. J. Green Nanotechnol: Mater. Sci. Eng., 2010, 1, (2), M81–M88. doi: 10.1080/19430840903430352
DufourJ.: ‘An introduction to metallurgy’, 5th edn, 11–12; 2006. New York
: Cameron.
17.
PanossianZ.: ‘Phosphating of steel for cold forming processes’, Encylopedia Tribol. Springer US, 2013, 2513–2523. doi:10.1007/978-0-387-92897-5_1187
18.
ZhangX. L., JiangZ. H., YaoZ. P., SongY. and WuZ. D.: ‘Effects of scan rate on the potentiodynamic polarization curve obtained to determine the Tafel slopes and corrosion current density’, Corr. Sci., 2009, 51, (3), 581–587. doi: 10.1016/j.corsci.2008.12.005
19.
SubramanianA., PratapT., KurupD. A., ThangarajG., BhowmikS., MukherjeeS. and RaneR.: ‘Titanium nitride deposition on aluminium for adhesion promotion’, Surf. Eng., 2016, 32, (4), 272–278. doi:10.1179/1743294415Y.0000000074
20.
GuinA. K., BhaduM. K., SinhababuM. and UdayabhanuG.: ‘The effect of zirconia ions on corrosion performance of sol–gel coated galvanized steel’, J. Coat Technol. Res., 2014, 11, (6), 967–977. doi: 10.1007/s11998-014-9602-y
21.
TrucT. A., PébèreN., HangT. T. X., HervaudY., BoutevinB.: ‘Study of the synergistic effect observed for the corrosion protection of a carbon steel by an association of phosphates’, Corr. Sci., 2002, 44, (9), 2055–2071. doi: 10.1016/S0010-938X(02)00013-6
22.
J. Zhang: ‘Development of environmentally friendly non-chrome conversion coatings for cold-rolled steel’, PhD dissertation, Polytechnic institute and state university, Blacksburg, Virginia, 2003.
GuoY. B., YangL. and WangD. G.: ‘Performance and hydrophobic behaviours of polystyrene composite coating’, Surf. Eng., 2016, 32, (2), 95–101. doi:10.1080/02670844.2015.1108073
25.
YuH. B. and LiR. F.: ‘Preparation and properties of biomimetic superhydrophobic composite coating’, Surf. Eng., 2016, 32, (2), 79–84. doi: 10.1179/1743294414Y.0000000301
26.
TamboliS. M., MhaskeS. T. and KaleD. D.: ‘Crosslinked polyethylene’, Indian J. Chem. Tech., 2004, 11, (6), 853–864.
27.
ChruscielJ. J. and LesniakE.: ‘Modification of thermoplastics with reactive silanes and siloxanes’, in ‘Thermoplastic Elastomers’, (ed. El-SonbatiA. Z.), 155–192; 2012. Rijeka: In Tech.
28.
LiZ.: ‘The friction and wear properties of nano-SiO2 and-TiO2 particle-reinforced PMMA composites’, J. Thermoplast. Compos. Mater., 2012, 27, (6), 793–800. doi:10.1177/0892705712454871
29.
KitaH., FukushimaM., JayaseelanD. D., ZengY. P. and OhsumiK.: ‘Oxidation resistance and high-temperature lubricating properties of magnesium-phosphate-treated graphite’, J. Am. Ceram. Soc., 2005, 88, (9), 2632–2634. doi: 10.1111/j.1551-2916.2005.00472.x
30.
De MelloJ. D. B., CostaH. L. and BinderR.: ‘Friction and wear behaviour of steam-oxidized sintered iron components coated with manganese phosphate’, Wear, 2007, 263, (1), 842–848. doi: 10.1016/j.wear.2007.01.062
31.
R. Levy: ‘Lubricant compositions and methods’, US Patent 7718585, 18 May 2010.
32.
K. Kurz and S. Oskar, TICONA GMBH: ‘Polyoxymethylene moulding compound containing a lubricant, the use thereof and moulded bodies produced therefrom’, US Patent 20030171470, 11 September 2003.
33.
MathazhaganA. and JosephR.: ‘Nanotechnology—A new prospective in organic coating-review’, Int. J. Chem. Eng. Appl., 2011, 2, (4), 225–237.
34.
ShiX., NguyenT. A., SuoZ., LiuY. and AvciR.: ‘Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating’, Surf. Coat. Technol., 2009, 204, (3), 237–245. doi: 10.1016/j.surfcoat.2009.06.048
35.
PersaudS. Y., CarceaA. G. and NewmanR. C.: ‘An electrochemical study assisting the interpretation of acid sulfate stress corrosion cracking of NiCrFe alloys’, Corr. Sci., 2015, 90, 383–391. doi: 10.1016/j.corsci.2014.10.033
