Joining of Ti and Fe-based alloys is challenging due to the formation of deleterious phases at the interface. Since fusion welding is unsuitable for the purpose, over the years, many solid-state welding techniques have been tried. This review provides a comparison of different solid-state joining methods used for Fe/Ti alloys with focus on the structural transformations in base materials, effect of process parameters on interface microstructure, its evolution and kinetics with thermal aging and structure–property correlation. Structural transformations in diffusion couples (near-equilibrium condition) are compared with those in weldments and a perspective is provided on the role of defects and alloying additions in enhancing/retarding reaction zone formation under both equilibrium and non-equilibrium conditions.
RajamaniN, BaldevR.Technology development of fast reactor fuel reprocessing in India. Current Sci. 2015;108:30–38.
4.
RajB, MudaliUK, JayakumarT, . Meeting the challenges related to material issues in chemical industries. Sadhana. 2000;25:519–559. doi:10.1007/BF02703505
5.
MudaliUK, Ananda RaoBM, ShanmugamK, . Corrosion and microstructural aspects of dissimilar joints of titanium and type 304L stainless steel. J Nucl Mater. 2003;321:40–48. doi:10.1016/S0022-3115(03)00194-6
SchutzRW, ThomasDE.Corrosion of titanium and titanium alloys. USA: ASM Handbook.
8.
Ravi ShankarA, DayalRK, BalasubramaniamR, . Effect of heat treatment on the corrosion behaviour of Ti-5Ta-1.8Nb alloy in boiling concentrated nitric acid. J Nucl Mater. 2008;372:277–284. doi:10.1016/j.jnucmat.2007.03.216
9.
FujiiT, BabaH.The effect of oxidizing ions on the passivity of the valve metals in boiling nitric acid solutions. Corros Sci. 1990;31:275–280. doi:10.1016/0010-938X(90)90119-P
10.
MudaliUK, DayalRK, GnanamoorthyJB.Corrosion studies on materials of construction for spent nuclear fuel reprocessing plant equipment. J Nucl Mater. 1993;203:73–82. doi:10.1016/0022-3115(93)90432-X
11.
TakeuchiM, SanoY, NakajimaY, . Corrosion study of titanium-5% tantalum alloy in hot nitric acid condensate. Proceeding of 20th National Conference on Nuclear Engineering, 2012, July 30th-August 3rd; ICONE20-POWER2012-54850.
12.
KapoorK, KainV, GopalkrishnaT, . High corrosion resistant Ti-5%Ta-1.8%Nb alloy for fuel reprocessing application. J Nucl Mater. 2003;322:36–44. doi:10.1016/S0022-3115(03)00302-7
13.
MythiliR, SarojaS, VijayalakshmiM, . Selection of optimum microstructure for improved corrosion resistance in a Ti-5%Ta-1.8%Nb alloy. J Nucl Mater. 2005;345:167–183. doi:10.1016/j.jnucmat.2005.05.007
14.
WuMF, YuC, YuZS, . A study of Ti/Fe contact reaction structures. Mater Sci Technol. 2004;20:658–660. doi:10.1179/026708304225012080
DuarteLI, KlotzUE, LeinenbachC, . Experimental study of the Fe-Ni-Ti system. Intermetallics. 2010;18:374–384. doi:10.1016/j.intermet.2009.08.008
17.
XuH, DuY, YuanZ, . Phase equilibria of the Fe-Nb-Ti system at 900 °C. J Alloys Compd. 2005;396:151–155. doi:10.1016/j.jallcom.2004.12.017
18.
AlemánB, GutiérrezI, UrcolaJJ.Interface microstructures in diffusion bonding of titanium alloys to stainless and low alloy steels. Mater Sci Technol. 1993;9:633–641. doi:10.1179/mst.1993.9.8.633
19.
AlemánB, GutiérrezI, UrcolaJJ.The use of Kirkendall effect for calculating intrinsic diffusion coefficients in a 316L / Ti6242 diffusion bonded couple. Scr Mater. 1997;36:509–515. doi:10.1016/S1359-6462(96)00414-9
20.
TaguchiO, TiwariGP, IijimaY.Growth kinetics of β-Ti solid solution in reaction diffusion. Mater Trans. 2003;44:83–88. doi:10.2320/matertrans.44.83
RaghavanV.Phase diagrams of ternary iron alloys. Part I. Delhi: IIT; 1987.
24.
WagnerC.The evaluation of data obtained with diffusion couples of binary single phase and multiphase systems. Acta Metall. 1969;17:99–107. doi:10.1016/0001-6160(69)90131-X
25.
SudhaC.Study of mass transport across microstructural and microchemical gradients in Fe, Ni and Ti based alloys [Ph.D thesis]. 2010, IIT Madras.
26.
CacciamaniG, De KeyzerJ, FerroR, . Critical evaluation of the Fe-Ni, Fe-Ti and Fe-Ni-Ti alloy systems. Intermetallics. 2006;14:1312–1325. doi:10.1016/j.intermet.2005.11.028
27.
WeissI, SemiatinSL.Thermomechanical processing of beta titanium alloys - an overview. Mater Sci Eng, A. 1998;243:46–65. doi:10.1016/S0921-5093(97)00783-1
28.
BaniaPJ. In: EylonD, BoyerRR, KossDA, editors. Beta titanium alloys in the 1990s. USA: The Minerals, Metals and Materials Society; 1993. p. 3. ISBN: 0-87339-200-0.
29.
HaoX, DongH, LiS, . Lap joining of TC4 titanium alloy to 304 stainless steel with fillet weld by GTAW using copper-based filler wire. J Mater Process Technol. 2018;257:88–100. doi:10.1016/j.jmatprotec.2018.02.020
30.
HaoX, DongH, LiP, . Dissimilar joining of TC4 alloy to ST16 steel by GTAW. J Manuf Process. 2019;37:413–417. doi:10.1016/j.jmapro.2018.12.016
31.
MannucciA, TomashchukI, MathieuA, . Direct laser welding of pure titanium to austenitic stainless steel. Procedia CIRP. 2018;74:485–490. doi:10.1016/j.procir.2018.08.138
32.
ChenS, ZhangM, HuangJ, . Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel. Mater Des. 2014;53:504–511. doi:10.1016/j.matdes.2013.07.044
33.
ZhangY, SunDQGuXY, . Strength improvement and interface characteristic of direct laser welded Ti alloy/stainless steel joint. Mater Lett. 2018;231:31–34. doi:10.1016/j.matlet.2018.08.014
34.
TomashchukI, SallamandP, AndrzejewskiH, . The formation of intermetallics in dissimilar Ti6Al4V/copper/AISI 316L electron beam and Nd:YAG laser joints. Intermetallics. 2011;19:1466–1473. doi:10.1016/j.intermet.2011.05.016
35.
GaoM, MeiSW, WangZM, . Characterisation of laser welded dissimilar Ti/steel joint using Mg interlayer. Sci Technol Weld Join. 2012;17:269–276. doi:10.1179/1362171812Y.0000000002
36.
AdomakoNK, KimJO, LeeSH, . Dissimilar welding between Ti-6Al-4 V and 17-4PH stainless steel using a vanadium interlayer. Mater Sci Eng, A. 2018;732:378–397. doi:10.1016/j.msea.2018.07.015
37.
ZhangY, SunDQ, GuXY, . A hybrid joint based on two kinds of bonding mechanisms for titanium alloy and stainless steel by pulsed laser welding. Mater Lett. 2016;185:152–155. doi:10.1016/j.matlet.2016.08.138
38.
ZhangY, SunDQ, GuXY, . Nd:YAG pulsed laser welding of TC4 Ti alloy to 301L stainless steel using Ta/V/Fe composite interlayer. Mater Lett. 2018;212:54–57. doi:10.1016/j.matlet.2017.10.057
39.
WangT, ZhangB, ChenG, . High strength electron beam welded titanium - stainless steel joint with V/Cu based composite filler metals. Vacuum. 2013;94:41–47. doi:10.1016/j.vacuum.2013.01.015
40.
ÇamG, KoçakM.Progress in joining of advanced materials. Int Mater Rev. 1998;43:1–44. doi:10.1179/imr.1998.43.1.1
41.
TomashchukI, SallamandP.Metallurgical strategies for the joining of titanium alloys with steels. Adv Eng Mater. 2018;20(1-17):1700764. doi:10.1002/adem.201700764
42.
MoD-f, SongT-f, FangY-j, . A review on diffusion bonding between titanium alloys and stainless steels. Adv Mater Sci Eng. 2018;2018:1–15. Article id: 8701890.
43.
PattersonRA.Welding, brazing and soldiering. USA: ASM Handbook, ASM International; 1993;6:525.
MomonoT, EnjoT, IkeuchiK.Effects of carbon content on the diffusion bonding of iron and steel to titanium. ISIJ Int. 1990;30:978–984. doi:10.2355/isijinternational.30.978
47.
GhoshM, BhanumurthyK, KaleGB, . Diffusion bonding of titanium to 304 stainless steel. J Nucl Mater. 2003;322:235–241. doi:10.1016/j.jnucmat.2003.07.004
48.
GhoshM, ChatterjeeS.Characterization of transition joints of commercially pure titanium to 304 stainless steel. Mater Charact. 2002;48:393–399. doi:10.1016/S1044-5803(02)00306-6
49.
GhoshM, ChatterjeeS.Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Mater Charact. 2005;54:327–337. doi:10.1016/j.matchar.2004.12.007
50.
GhoshM, ChatterjeeS.Diffusion bonded transition joints of titanium to stainless steel with improved properties. Mater Sci Eng, A. 2003;358:152–158. doi:10.1016/S0921-5093(03)00298-3
51.
GhoshM, DasS, BanarjeePS, . Variation in the reaction zone and its effects on the strength of diffusion bonded titanium-stainless steel couple. Mater Sci Eng, A. 2005;390:217–226. doi:10.1016/j.msea.2004.08.039
52.
KatoH, ShibataM, YoshikawaK.Diffusion welding of Ti/Ti and Ti/stainless steel rods under phase transformation in air. Mater Sci Technol. 1986;2:405–409. doi:10.1179/mst.1986.2.4.405
53.
BhanumurthyK, KaleGB.Reactive diffusion between titanium and stainless steel. J Mater Sci Lett. 1993;12:1879–1881. doi:10.1007/BF00540018
54.
KurtB, OrhanN, EvinE, . Diffusion bonding between Ti-6Al-4 V alloy and ferritic stainless steel. Mater Lett. 2007;61:1747–1750. doi:10.1016/j.matlet.2006.07.123
55.
KunduS, SamS, ChatterjeeS.Interface microstructure and strength properties of Ti-6Al-4 V and microduplex stainless steel diffusion bonded joints. Mater Des. 2011;32:2997–3003. doi:10.1016/j.matdes.2010.12.052
56.
OrhanN, KhanTI, EroğluM.Diffusion bonding of a microduplex stainless steel to Ti-6Al-4 V. Scr Mater. 2001;45:441–446. doi:10.1016/S1359-6462(01)01041-7
57.
WangZC, RidleyN, LorimerGW.Evaluation of diffusion bonds formed between super plastic sheet materials. J Mater Sci. 1996;31:5199–5206. doi:10.1007/BF00355925
58.
KunduS, GhoshM, ChatterjeeS.Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Mater Sci Eng, A. 2006;428:18–23. doi:10.1016/j.msea.2005.10.047
59.
PoddarD.Solid-state diffusion bonding of commercially pure titanium and precipitation hardening stainless steel. Int J Rec Trend Eng. 2009;1:93–99.
60.
HeP, ZhangJH, LiXQ.Diffusion bonding of titanium alloy to stainless steel wire mesh. Mater Sci Technol. 2001;17:1158–1162. doi:10.1179/026708301101511112
61.
YuanXJ, ShengGM, QinB, . Impulse pressuring diffusion bonding of titanium alloy to stainless steel. Mater Charact. 2008;59:930–936. doi:10.1016/j.matchar.2007.08.003
62.
VigramanT, RavindranD, NarayanasamyR.Effect of phase transformation and intermetallic compounds on the microstructure and tensile strength properties of diffusion-bonded joints between Ti-6Al-4 V and AISI 304L. Mater Des (1980-2015). 2012;36:714–727. doi:10.1016/j.matdes.2011.12.024
63.
KurtB, OrhanN, KayaM.Interface characterisation of diffusion bonded Ti-6Al-4 V alloy and austenitic stainless steel couple. Mater Sci Technol. 2009;25:556–560. doi:10.1179/174328408X311107
64.
KunduS, ChatterjeeS, OlsonD, . Effects of intermetallic phases on the bond strength of diffusion-bonded joints between titanium and 304 stainless steel using nickel interlayer. Metall Mater Trans A. 2007;38:2053–2060. doi:10.1007/s11661-007-9273-8
65.
KunduS, AnandG, ChatterjeeS.Diffusion bonding of 17-4 precipitation hardening stainless steel to Ti alloy with and without Ni alloy interlayer: interface microstructure and mechanical properties. Metall Mater Trans A. 2013;44:2196–2211. doi:10.1007/s11661-012-1553-2
66.
KunduS, GhoshM, LaikA, . Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Mater Sci Eng, A. 2005;407:154–160. doi:10.1016/j.msea.2005.07.010
67.
KunduS, ChatterjeeS.Effects of temperature on interface microstructure and strength properties of titanium-niobium stainless steel diffusion bonded joints. Mater Sci Technol. 2011;27:1177–1182. doi:10.1179/026708309X12595712305870
68.
LiP, LiJ, XiongJ, . Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer. Mater Charact. 2012;68:82–87. doi:10.1016/j.matchar.2012.03.016
69.
DengY, ShengG, XuC.Evaluation of the microstructure and mechanical properties of diffusion bonded joints of titanium to stainless steel with a pure silver interlayer. Mater Des (1980-2015). 2013;46:84–87. doi:10.1016/j.matdes.2012.09.058
70.
CarlLR.Commercial data sheets for explosion bonded clad metals. Met. Prog. 1944;46:102.
71.
CarpenterSH, WittmanRH.Explosion welding. Annu Rev Mater Sci. 1975;5:177–199. doi:10.1146/annurev.ms.05.080175.001141
72.
ArthurG.Applications of explosive welding to heat exchangers. Mater Des. 1985;6:37–41. doi:10.1016/0261-3069(85)90089-5
73.
CrosslandB, WilliamsJD.Explosive welding. Int Mater Rev. 1970;15:79–100. doi:10.1179/imr.1970.15.1.79
74.
TamhankarRV, RamesamJ.Metallography of explosive welds. Mater Sci Eng. 1974;13:245–254. doi:10.1016/0025-5416(74)90195-5
75.
PocalykoA.Explosion clad plate for corrosion service. Mater Pro. 1965;6:10–15.
76.
PocalykoA.Fabrication of explosion-welded titanium-clad composites. Weld J. 1987;25:24–29.
77.
BataevIA, LazurenkoDV, TanakaS, . High cooling rates and metastable phases at the interfaces of explosively welded materials. Acta Mater. 2017;135:277–289. doi:10.1016/j.actamat.2017.06.038
78.
PaulH, MorgielJ, BaudinT, . Characterization of explosive weld joints by TEM and SEM/EBSD. Arch Metall Mater. 2014;59:1129–1136. doi:10.2478/amm-2014-0197
79.
Akbari-MousaviSAA, BarrettLM, Al-HassaniSTS.Explosive welding of metal plates. J Mater Process Technol. 2008;202:224–239. doi:10.1016/j.jmatprotec.2007.09.028
80.
WangT, ZhangF, LiX, . Interfacial evolution of explosively welded titanium/steel joint under subsequent EBW process. J Mater Process Technol. 2018;261:24–30. doi:10.1016/j.jmatprotec.2018.05.031
81.
Akbari MousaviAA, BurleySJ, Al-HassaniSTS.Simulation of explosive welding using the williamsburg equation of state to model low detonation velocity explosives. Int J Impact Eng. 2005;31:719–734. doi:10.1016/j.ijimpeng.2004.03.003
82.
PrasanthiTN, SudhaC, Ravikirana, . Explosive cladding and post-weld heat treatment of mild steel and titanium. Mater Des. 2016;93:180–193. doi:10.1016/j.matdes.2015.12.120
83.
XieMX, ZhangLJ, ZhangGF, . Microstructure and mechanical properties of CP-Ti/X65 bimetallic sheets fabricated by explosive welding and hot rolling. Mater Des. 2015;87:181–197. doi:10.1016/j.matdes.2015.08.021
84.
Akbari MousaviSAA, Al-HassaniSTS, AtkinsAG.Bond strength of explosively welded specimens. Mater Des. 2008;29:1334–1352. doi:10.1016/j.matdes.2007.06.010
85.
KahramanN, GulencB, FindikF.Joining of titanium/stainless steel by explosive welding and effect on interface. J Mater Process Technol. 2005;169:127–133. doi:10.1016/j.jmatprotec.2005.06.045
86.
Akbari MousaviSAA, Farhadi SartangiP.Experimental investigation of explosive welding of Cp-titanium / AISI 304 stainless steel. Mater Des. 2009;30:459–468. doi:10.1016/j.matdes.2008.06.016
87.
RaghukandanK, TamilchelvanP, MeikandanN.A study of the weld zones on explosive cladded Titan12/SS 304 L plates. Mater Sci Forum. 2007;566:285–290. doi:10.4028/www.scientific.net/MSF.566.285
88.
ManikandanP, HokamotoH, DeribasAA, . Explosive welding of titanium/stainless steel by controlling energetic conditions. Mater Trans. 2006;47:2049–2055. doi:10.2320/matertrans.47.2049
89.
NishidaM, ChibyA, HondaY, . Electron microscopy studies of bonding interface in explosively welded Ti/steel clads. ISIJ Int. 1995;35:217–219. doi:10.2355/isijinternational.35.217
90.
SudhaC, PrasanthiTN, MurugesanS, . Study of interface and base metal microstructures in explosive clad joint of Ti-5Ta-1.8Nb and 304L stainless steel. Sci Technol Weld Joining. 2011;16:133–139. doi:10.1179/1362171810Y.0000000001
91.
GuoyinZ, XiS, JinghuaZ.Interfacial bonding mechanism and mechanical performance of Ti/steel bimetallic clad sheet produced by explosive welding and annealing. Rare Met Mater Eng. 2017;46:906–911. doi:10.1016/S1875-5372(17)30120-0
92.
YadegariM, EbrahimiAR, KaramiA.Effect of heat treatment on interface microstructure and bond strength in explosively welded Ti/304L stainless steel clad. Mater Sci Technol. 2013;29:69–75. doi:10.1179/1743284712Y.0000000099
93.
RajaniHRZ, Akbari MousaviSAA.The role of impact energy in failure of explosive cladding of Inconel 625 and steel. J Fail Anal Prev. 2012;12:646–653. doi:10.1007/s11668-012-9601-1
94.
SaravananS, RaghukandanK.Energy dissipation in explosive welding of dissimilar metals. Mater Sci Forum. 2011;673:125–129. doi:10.4028/www.scientific.net/MSF.673.125
95.
SudhaC, PrasanthiTN, Thomas PaulV, . Metastable phase transformation in Ti-5Ta-2Nb alloy and 304L austenitic stainless steel under explosive cladding conditions. Metall Mater Trans A. 2012;43:3596–3607. doi:10.1007/s11661-012-1198-1
96.
SudhaC, PrasanthiTN, PaulVT, . Assessment of mechanical property of Ti-5Ta-2Nb and 304L SS explosive clad and correlation with microstructure. Procedia Eng. 2014;86:42–50. doi:10.1016/j.proeng.2014.11.009
97.
BankerJG, WinskyJP. In Proc. Hydrometallurgical applications of titanium – clad steel. Alta Metallurgical Services, ALTA; 1999. p. 99–104.
98.
PrasanthiTN, SudhaC, ParidaPK, . Prediction and confirmation of phases formed in the diffusion zone of Ti-5Ta-2Nb/304L SS explosive clads. Metall Mater Trans A. 2015;46:1519–1534. doi:10.1007/s11661-015-2768-9
99.
Akbari MousaviSAA, SartangiPF.Effect of post-weld heat treatment on the interface microstructure of explosively welded titanium-stainless steel composite. Mater Sci Eng, A. 2008;494:329–336. doi:10.1016/j.msea.2008.04.032
TsangS.Welding, brazing and soldiering. USA: ASM Handbook, ASM International; 1993;6:879.
103.
MeshramSD, MohandasT, Madhusudhan ReddyG.Friction welding of dissimilar pure metals. J Mater Process Technol. 2007;184:330–337. doi:10.1016/j.jmatprotec.2006.11.123
104.
KimuraM, IijimaT, KusakaM, . Joining phenomena and tensile strength of friction welded joint between pure titanium and low carbon steel. Mater Des. 2014;55:152–164. doi:10.1016/j.matdes.2013.09.044
105.
KimuraM, IijimaT, KusakaM, . Joining phenomena and tensile strength of friction welded joint between Ti-6Al-4 V titanium alloy and low carbon steel. J Manuf Process. 2016;24:203–211. doi:10.1016/j.jmapro.2016.09.004
106.
LeeWB, JungSB.Effect of microstructure on mechanical properties of friction-welded joints between Ti and AISI 321 stainless steel. Mater Trans. 2004;45:2805–2811. doi:10.2320/matertrans.45.2805
107.
BaekSW, LeeWB, KooJM, . A comparative evaluation of friction-welded and brazed Ti and AISI 321stainless steel joints. Mater Sci Forum. 2008;580-582:423–426. doi:10.4028/www.scientific.net/MSF.580-582.423
108.
Akbari MousaviSAA, GoharikiaM.Investigations on the mechanical properties and microstructure of dissimilar Cp-titanium and AISI 316L austenitic stainless steel continuous friction welds. Mater Des. 2011;32:3066–3075. doi:10.1016/j.matdes.2010.12.057
109.
PrasanthiTN, SudhaC, Ravikirana, . Friction welding of mild steel and titanium: optimization of process parameters and evolution of interface microstructure. Mater Des. 2015;88:58–68. doi:10.1016/j.matdes.2015.08.141
110.
DeyHC, AshfaqM, BhaduriAK, . Joining of titanium to 304L stainless steel by friction welding. J Mater Process Technol. 2009;209:5862–5870. doi:10.1016/j.jmatprotec.2009.06.018
111.
SatyanarayanaVV, Madhusudhan ReddyG, MohandasT.Dissimilar metal friction welding of austenitic-ferritic stainless steels. J Mater Process Technol. 2005;160:128–137. doi:10.1016/j.jmatprotec.2004.05.017
112.
FujiA, AmeyamaK, NorthTH.Improved mechanical properties in dissimilar Ti-AISI 304L joints. J Mater Sci. 1996;31:819–827. doi:10.1007/BF00367903
113.
FujiA, NorthTH, AmeyamaK, . Improving tensile strength and bend ductility of titanium/Al51 304L stainless steel friction welds. Mater Sci Technol. 1992;8:219–235. doi:10.1179/mst.1992.8.3.219
114.
DongH, YuL, GaoH, . Microstructure and mechanical properties of friction welds between TiAl alloy and 40Cr steel rods. Trans Nonferr Metal Soc China. 2014;24:3126–3133. doi:10.1016/S1003-6326(14)63451-8
115.
DongH, YuL, DengD, . Effect of post-weld heat treatment on properties of friction welded joint between TC4 titanium alloy and 40Cr steel rods. J Mater Sci Technol. 2015;31:962–968. doi:10.1016/j.jmst.2014.09.021
116.
LeeWB, KimYJ, JungSB.Effects of copper insert layer on the properties of friction welded joints between TiAl and AISI 4140 structural steel. Intermetallics. 2004;12:671–678. doi:10.1016/j.intermet.2004.02.004
117.
MuralimohanCH, AshfaqM, AshiriR, . Analysis and characterization of the role of Ni interlayer in the friction welding of titanium and 304 austenitic stainless steel. Metall Mater Trans A. 2016;47:347–359. doi:10.1007/s11661-015-3210-z
118.
MaH, QinG, GengP, . Effect of post-weld heat treatment on friction welded joint of carbon steel to stainless steel. J Mater Process Technol. 2016;227:24–33. doi:10.1016/j.jmatprotec.2015.08.004
119.
NandanR, DebroyT, BhadeshiaHKDH.Recent advances in friction-stir welding - process, weldment structure and properties. Prog Mater Sci. 2008;53:980–1023. doi:10.1016/j.pmatsci.2008.05.001
120.
VenuB, BhavyaSwathiI, RajuLS, . A review on friction stir welding of various metals and its variables. Mater Today Proc. 2019;18:298–302. doi:10.1016/j.matpr.2019.06.304
121.
MishraRS, MaZY.Friction stir welding and processing. Mater Sci Eng R: Rep. 2005;50:1–78. doi:10.1016/j.mser.2005.07.001
122.
ThomasWM, NicholasED.Friction stir welding for the transportation industries. Mater Des. 1997;18:269–273. doi:10.1016/S0261-3069(97)00062-9
123.
Fazel NajafabadiM, Kashani BozorgSF, Zarei HanzakiA.Joining of CP-Ti to 304 stainless steel using friction stir welding technique. Mater Des. 2010;31:4800–4807. doi:10.1016/j.matdes.2010.05.003
124.
LiS, ChenY, KangJ, . Interfacial microstructures and mechanical properties of dissimilar titanium alloy and steel friction stir butt-welds. J Manuf Process. 2019;40:160–168. doi:10.1016/j.jmapro.2019.03.015
125.
LiaoJ, YamamotoN, LiuH, . Microstructure at friction stir lap joint interface of pure titanium and steel. Mater Lett. 2010;64:2317–2320. doi:10.1016/j.matlet.2010.07.049
126.
GaoY, NakataK, NagatsukaK, . Interface microstructural control by probe length adjustment in friction stir welding of titanium and steel lap joint. Mater Des (1980-2015). 2015;65:17–23. doi:10.1016/j.matdes.2014.08.063
127.
LiS, ChenY, ZhouX, . High-strength titanium alloy/steel butt joint produced via friction stir welding. Mater Lett. 2019;234:155–158. doi:10.1016/j.matlet.2018.09.094
128.
Roll welding. Welding, brazing and soldiering. USA: ASM Handbook, ASM International; 1993;6:870.
129.
JamaatiR, ToroghinejadMR.Cold roll bonding bond strengths: review. Mater Sci Technol. 2011;27:1101–1108. doi:10.1179/026708310X12815992418256
130.
ZhaoDS, YanJC, WangY, . Relative slipping of interface of titanium alloy to stainless steel during vacuum hot roll bonding. Mater Sci Eng, A. 2009;499:282–286. doi:10.1016/j.msea.2007.11.112
131.
ZhaoDS, YanJC, LiuY, . Interfacial structure and mechanical properties of hot-roll bonded joints between titanium alloy and stainless steel using niobium interlayer. Trans Nonferr Metal Soc China. 2014;24:2839–2844. doi:10.1016/S1003-6326(14)63416-6
132.
ZhaoDS, YanJC, WangCW, . Interfacial structure and mechanical properties of hot roll bonded joints between titanium alloy and stainless steel using copper interlayer. Sci Technol Weld Joining. 2008;13:765–768. doi:10.1179/136217108X329304
133.
YanJC, ZhaoDS, WangCW, . Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer. Mater Sci Technol. 2009;25:914–918. doi:10.1179/174328408X365766
134.
YangD, LuoZ, XieG, . Interfacial microstructure and properties of a vacuum roll-cladding titanium-steel clad plate with a nickel interlayer. Mater Sci Eng, A. 2019;753:49–58. doi:10.1016/j.msea.2019.03.008
135.
YuC, XiaoH, YuH, . Mechanical properties and interfacial structure of hot-roll bonding TA2/Q235B plate using DT4 interlayer. Mater Sci Eng, A. 2017;695:120–125. doi:10.1016/j.msea.2017.03.118
136.
LeeKS, YoonDH, LeeSE, . The effect of thermomechanical treatment on the interface microstructure and local mechanical properties of roll bonded pure Ti/439 stainless steel multilayered materials. Procedia Eng. 2011;10:3459–3464. doi:10.1016/j.proeng.2011.04.570
137.
LiBX, ChenZJ, HeWJ, . Effect of interlayer material and rolling temperature on microstructures and mechanical properties of titanium/steel clad plates. Mater Sci Eng, A. 2019;749:241–248. doi:10.1016/j.msea.2019.02.018
138.
GuDD, MeinersW, WissenbachK, . Laser additive manufacturing of metallic components: materials processes and mechanisms. Int Mater Rev. 2012;57:133–164. doi:10.1179/1743280411Y.0000000014
SahasrabudheH, HarrisonR, CarpenterC, . Stainless steel to titanium bimetallic structure using LENSTM. Addit Manuf. 2015;5:1–8. doi:10.1016/j.addma.2014.10.002
142.
YangJ, LiX, YaoH, . Interfacial features of stainless steel/titanium alloy multi‐metal fabricated by laser additive manufacturing. Acta Metall Sin (English Lett). 2022;35:1357–1364. doi:10.1007/s40195-022-01384-9
143.
ReichardtA, Peter DillonR, BorgoniaJP, . Development and characterization of Ti-6Al-4 V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing. Mater Des. 2016;104:404–413. doi:10.1016/j.matdes.2016.05.016
144.
AdomakoNK, NohS, OhCS, . Laser deposition additive manufacturing of 17-4PH stainless steel on Ti-6Al-4 V using V interlayer. Mater Res Lett. 2019;7:259–266. doi:10.1080/21663831.2019.1596989
145.
LiW, YanL, KarnatiS, . Ti-Fe intermetallics analysis and control in joining titanium alloy and stainless steel by laser metal deposition. J Mater Process Technol. 2017;242:39–48. doi:10.1016/j.jmatprotec.2016.11.010
146.
LiW, KarnatiS, KriewallC, . Fabrication and characterization of a functionally graded material from Ti-6Al-4 V to SS316 by laser metal deposition. Addit. Manuf. 2017;14:95–104. doi:10.1016/j.addma.2016.12.006
AstaritaA, ScherilloF, CurioniM, . Study of the linear friction welding process of dissimilar Ti-6Al-4 V/stainless steel joints. Mater Manuf Processes. 2016;31:2115–2122. doi:10.1080/10426914.2016.1151048
149.
MudaliU.K., DayalRK, GnanamoorthyJB.Corrosion behavior of weldments of Ti and Ti-5Ta for nuclear fuel reprocessing plants. J Mater Eng Perform. 1995;4:756–760. doi:10.1007/BF02646452
