Conventional medium Mn steels processed by intercritical annealing (IA) demonstrate low yield strength. The present work investigates the effect of low-temperature partitioning (LTP) on the microstructure and tensile properties of medium Mn steel. It is found that medium Mn steel processed by LTP at 300°C possesses ultra-high yield strength of 1683 MPa and proper uniform elongation of 11.3%. The LTP process does not reduce the yield strength but substantially enhances the tensile ductility. The increase of the tensile ductility after LTP treatment can be ascribed to the reduction of the residual stress, martensitic transformation, and the well-developed ductile fracture behaviour. The present LTP process provides an alternative pathway to develop strong and ductile medium Mn steel.
ShiJSunXWangMEnhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite. Scripta Mater. 2010;63:815–818.
2.
HeBBLuoHWHuangMX.Experimental investigation on a novel medium Mn steel combining transformation-induced plasticity and twinning-induced plasticity effects. Int J Plast. 2016;78:173–186.
3.
LiZCDingHMisraRDKMicrostructural evolution and deformation behavior in the Fe-(6,8.5)Mn-3Al-0.2C TRIP steels. Mat Sci Eng A. 2016;672:161–169.
4.
JeongMSParkTMChoiSRecovering the ductility of medium-Mn steel by restoring the original microstructure. Scripta Mater. 2021;190:16–21.
5.
HanJLeeSJungJThe effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel. Acta Mater. 2014;78:369–377.
6.
HeBBHuBYenHWHigh dislocation density-induced large ductility in deformed and partitioned steels. Science. 2017;357:1029–1032.
7.
WuXLYangMXYuanFPCombining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility. Acta Mater. 2016;112:337–346.
8.
LiZPradeepKGDengYMetastable high-entropy dual-phase alloys overcome the strength-ductility trade-off. Nature. 2016;534:227–230.
9.
CaoWQWangCShiJMicrostructure and mechanical properties of Fe-0.2C-5Mn steel processed by ART-annealing. Mat Sci Eng A. 2011;528:6661–6666.
10.
MagalhaesASMoutinhLDOliveiraIRUltrafine grained microstructure in a medium manganese steel after warm rolling without intercritical annealing. ISIJ Int. 2017;57:1121–1128.
11.
SunBFazeliFScottCMicrostructural characteristics and tensile behavior of medium manganese steels with different manganese additions. Mat Sci Eng A. 2018;729:496–507.
12.
SohnSSChoiKKwakJNovel ferrite-austenite duplex lightweight steel with 77% ductility by transformation induced plasticity and twinning induced plasticity mechanisms. Acta Mater. 2014;78:181–189.
13.
WangMTasanCCPongeDSmaller is less stable: size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels. Acta Mater. 2014;79:268–281.
14.
LeeSDe CoomanBC.Effect of the intercritical annealing temperature on the mechanical properties of 10 Pct Mn multi-phase steel. Metall Mater Trans A. 2014;45:5009–5016.
15.
LeeCJeongJHanJCoupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite. Acta Mater. 2015;84:1–8.
16.
CaiZHDingHXueXMicrostructural evolution and mechanical properties of hot-rolled 11% manganese TRIP steel. Mat Sci Eng A. 2013;560:388–395.
17.
TrangTTTHeoY.Effect of solution treatment temperature on microstructure evolution and tensile property of a medium Mn steel having a lamellar structure. Mat Sci Eng A. 2021;805:140578.
18.
ZhangXMiyamotoGTojiYRole of cementite and retained austenite on austenite reversion from martensite and bainite in Fe-2Mn-1.5Si-0.3C alloy. Acta Mater. 2021;209:116772.
19.
HanJLeeY.The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels. Acta Mater. 2014;67:354–361.
20.
NakadaNMizutaniKTsuchiyamaTDifference in transformation behavior between ferrite and austenite formations in medium manganese steel. Acta Mater. 2014;65:251–258.
21.
LuoHWQiuCHDongHExperimental and numerical analysis of influence of carbide on austenitisation kinetics in 5Mn TRIP steel. Mater Sci Tech. 2014;30:1367–1377.
22.
SpeerJRanaRMatlockDProcessing variants in medium-Mn steels. Metals (Basel). 2019;9:771.
23.
van TolRTKimJKZhaoLα′-Martensite formation in deep-drawn Mn-based TWIP steel. J Mater Sci. 2012;47:4845–4850.
24.
CullityBDGrahamCD.Introduction to magnetic materials. Piscataway (NJ): IEEE Press; 2009.
25.
van DijkNHButtAMZhaoLThermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling. Acta Mater. 2005;53:5439–5447.
26.
UngarTDragomirIReveszAThe contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice. J Appl Crystallogr. 1999;32:992–1002.
27.
UngarTGubiczaJRibarikGCrystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals. J Appl Crystallogr. 2001;34:298–310.
28.
UngárT.Microstructural parameters from X-ray diffraction peak broadening. Scripta Mater. 2004;51:777–781.
29.
UngárTBorbélyA.The effect of dislocation contrast on x-ray line broadening: a new approach to line profile analysis. Appl Phys Lett. 1996;69:3173–3175.
30.
HajyAkbaryFSietsmaJBottgerAJAn improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures. Mat Sci Eng A. 2015;639:208–218.
31.
KraussG.Solidification, segregation, and banding in carbon and alloy steels. Metall Mater Trans B. 2003;34:781–792.
32.
HajyAkbaryFSietsmaJPetrovRHA quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels. Scripta Mater. 2017;137:27–30.
33.
SpeerJGEdmondsDVRizzoFCPartitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation. Curr Opin Solid State Mater Sci. 2004;8:219–237.
34.
SpeerJMatlockDKDe CoomanBCCarbon partitioning into austenite after martensite transformation. Acta Mater. 2003;51:2611–2622.
35.
Da SilvaEPDe KnijfDXuWIsothermal transformations in advanced high strength steels below martensite start temperature. Mater Sci Tech. 2015;31:808–816.
36.
CottrellAHBilbyBA.Dislocation theory of yielding and strain ageing of iron. Proc Phys Soc London Sect A. 1949;62:49–62.
37.
TaylorGI.The mechanism of plastic deformation of crystals. Part I Theoretical Proc R Soc A. 1934;145:362–387.
38.
YangHBhadeshiaH.Austenite grain size and the martensite-start temperature. Scripta Mater. 2009;60:493–495.
39.
AndrewsK.Empirical formulae for the calculation of some transformation temperatures. J Iron Steel Inst. 1965;203:721–727.
40.
BreedisJF.Influence of dislocation substructure on martensitic transformation in stainless steel. Acta Metall. 1965;13:239–250.
41.
ChatterjeeSWangHSYangJRMechanical stabilisation of austenite. Mater Sci Tech. 2006;22:641–644.
42.
ChiangJLawrenceBBoydJDEffect of microstructure on retained austenite stability and work hardening of TRIP steels. Mat Sci Eng A. 2011;528:4516–4521.
43.
JacquesPJLadriereJDelannayF.On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels. Metall Mater Trans A. 2001;32:2759–2768.
44.
Jimenez-MeleroEvan DijkNHZhaoLThe effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels. Acta Mater. 2009;57:533–543.
45.
YenHOoiSWEizadjouMRole of stress-assisted martensite in the design of strong ultrafine-grained duplex steels. Acta Mater. 2015;82:100–114.
46.
ParkYBKestensLJonasJJ.Effect of internal stresses in cold rolled IF steel on the orientations of recrystallized grains. ISIJ Int. 2000;40:393–401.
47.
KajiwaraKSatoMHashimotoTEvaluation of internal stress in individual grains of cold-rolled stainless steel by energy dispersive x-ray diffraction. ISIJ Int. 2013;53:165–169.
48.
MengQPRongYHHsuTY.Effect of internal stress on autocatalytic nucleation of martensitic transformation. Metall Mater Trans A. 2006;37:1405–1411.
49.
JacquesPFurnemontQMertensAOn the sources of work hardening in multiphase steels assisted by transformation-induced plasticity. Philo Mag A. 2001;81:1789–1812.
