This work studies the microstructure and tensile properties of a cold-rolled Fe–0.20C–4.86Mn (mass %) steel after short intercritical annealing (IA) times using scanning and transmission electron microscopy, and uniaxial tensile tests. The short IA time is applied to represent the process characteristics of the industrial continuous annealing line. The experimental results show that IA temperature has a strong influence on the final microstructure and tensile properties while IA time has less. The fractions of retained austenite are much higher after IA at 650 and 675°C than the other IA temperatures, and thus improving elongation. Simulations using the DICTRA software and constitutive modelling are further performed to assist the understanding of the microstructure evolution and stress–strain curves.
BouazizO, AllainS, ScottCP, High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships. Curr Opin Solid State Mater Sci. 2011;15:141–168. doi: 10.1016/j.cossms.2011.04.002
2.
EdmondsDV, HeK, RizzoFC, Quenching and partitioning martensite – a novel steel heat treatment. Mater Sci Eng A. 2006;438–440:25–34. doi: 10.1016/j.msea.2006.02.133
3.
De CoomanBC.Structure-properties relationship in TRIP steels containing carbide-free bainite. Curr Opin Solid State Mater Sci. 2004;8:285–303. doi: 10.1016/j.cossms.2004.10.002
4.
ZhaoJ, JiangZ.Thermomechanical processing of advanced high strength steels. Prog Mater Sci. 2018;94:174–242. doi: 10.1016/j.pmatsci.2018.01.006
5.
LiangJ, ZhaoZ, TangD, Improved microstructural homogeneity and mechanical property of medium manganese steel with Mn segregation banding by alternating lath matrix. Mater Sci Eng A. 2018;711:175–181. doi: 10.1016/j.msea.2017.11.046
LuoH, DongH.New ultrahigh-strength Mn-alloyed TRIP steels with improved formability manufactured by intercritical annealing. Mater Sci Eng A. 2015;626:207–212. doi: 10.1016/j.msea.2014.12.049
8.
LeeY-K, HanJ.Current opinion in medium manganese steel. Mater Sci Technol. 2015;31:843–856. doi: 10.1179/1743284714Y.0000000722
9.
LuoH, ShiJ, WangC, Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel. Acta Mater. 2011;59:4002–4014. doi: 10.1016/j.actamat.2011.03.025
10.
LuoH, LiuJ, DongH.A novel observation on cementite formed during intercritical annealing of medium Mn steel. Metall Mater Trans A. 2016;47:3119–3124. doi: 10.1007/s11661-016-3448-0
11.
ZhaoC, ZhangC, CaoWQ, Observation on formation of fresh martensite from the reversed austenite during water-quenching process in Fe-0.2C-5Mn steel. Metall Mater Trans A Phys Metall Mater Sci. 2015;46:3789–3792. doi: 10.1007/s11661-015-2991-4
12.
DingR, DaiZ, HuangM, Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel. Acta Mater. 2018;147:59–69. doi: 10.1016/j.actamat.2018.01.009
13.
TamuraI.Martensitic transformations and mechanical effects. In: OlsonGB, OwenWS, editors. Martensite. Materials Park, OH: ASM International; 1992. p. 227–242.
14.
KangS, SpeerJG, KrizanD, Prediction of tensile properties of intercritically annealed Al-containing 0.19C-4.5Mn (wt%) TRIP steels. Mater Des. 2016;97:138–146. doi: 10.1016/j.matdes.2016.02.058
15.
CullityBD, TockSRS.Elements of X-ray diffraction. 3rd ed. Upper Saddle River, USA: Prentice Hall; 2001.
16.
DingW, HedströmP, LiY.Heat treatment, microstructure and mechanical properties of a C-Mn-Al-P hot dip galvanizing TRIP steel. Mater Sci Eng A. 2016;674:151–157. doi: 10.1016/j.msea.2016.07.119
NazemiF, Hamel-AkréJ, BocherP.Modeling of cementite coarsening during tempering of low-alloyed-medium carbon steel. J Mater Sci. 2018;53:6198–6218. doi: 10.1007/s10853-017-1943-3
19.
HuyanF, YanJ-Y, HöglundL, Simulation of the growth of austenite from As-quenched martensite in medium Mn steels. Metall Mater Trans A. 2018;49:1053–1060. doi: 10.1007/s11661-018-4497-3
20.
SeoEJ, ChoL, EstrinY, Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel. Acta Mater. 2016;113:124–139. doi: 10.1016/j.actamat.2016.04.048
21.
BouazizO, BuesslerP.Iso-work increment assumption for heterogeneous material behaviour modelling. Adv Eng Mater. 2004;6:79–83. doi: 10.1002/adem.200300524
RayKK, MondalD.The effect of interlamellar spacing on strength of pearlite in annealed eutectoid and hypoeutectoid plain carbon steels. Acta Metall Mater. 1991;39:2201–2208. doi: 10.1016/0956-7151(91)90002-I
24.
TsuchidaN, MasudaH, HaradaY, Effect of ferrite grain size on tensile deformation behavior of a ferrite-cementite low carbon steel. Mater Sci Eng A. 2008;488:446–452. doi: 10.1016/j.msea.2007.11.047
25.
WangXG, WangL, HuangMX.In-situ evaluation of Lüders band associated with martensitic transformation in a medium Mn transformation-induced plasticity steel. Mater Sci Eng A. 2016;674:59–63. doi: 10.1016/j.msea.2016.07.054
26.
LuoH, DongH, HuangM.Effect of intercritical annealing on the Lüders strains of medium Mn transformation-induced plasticity steels. Mater Des. 2015;83:42–48. doi: 10.1016/j.matdes.2015.05.085
27.
LeeS, EstrinY, De CoomanBC.Constitutive modeling of the mechanical properties of V-added medium manganese TRIP steel. Metall Mater Trans A Phys Metall Mater Sci. 2013;44:3136–3146. doi: 10.1007/s11661-013-1648-4
28.
HanJ, LeeSJ, JungJG, The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel. Acta Mater. 2014;78:369–377. doi: 10.1016/j.actamat.2014.07.005
